diff --git a/charts/postgresql/values.yaml b/charts/postgresql/values.yaml
new file mode 100644
index 0000000..7f8b20b
--- /dev/null
+++ b/charts/postgresql/values.yaml
@@ -0,0 +1,1425 @@
+## @section Global parameters
+## Please, note that this will override the parameters, including dependencies, configured to use the global value
+##
+global:
+  ## @param global.imageRegistry Global Docker image registry
+  ##
+  imageRegistry: ""
+  ## @param global.imagePullSecrets Global Docker registry secret names as an array
+  ## e.g.
+  ## imagePullSecrets:
+  ##   - myRegistryKeySecretName
+  ##
+  imagePullSecrets: []
+  ## @param global.storageClass Global StorageClass for Persistent Volume(s)
+  ##
+  storageClass: ""
+  postgresql:
+    ## @param global.postgresql.auth.postgresPassword Password for the "postgres" admin user (overrides `auth.postgresPassword`)
+    ## @param global.postgresql.auth.username Name for a custom user to create (overrides `auth.username`)
+    ## @param global.postgresql.auth.password Password for the custom user to create (overrides `auth.password`)
+    ## @param global.postgresql.auth.database Name for a custom database to create (overrides `auth.database`)
+    ## @param global.postgresql.auth.existingSecret Name of existing secret to use for PostgreSQL credentials (overrides `auth.existingSecret`).
+    ## @param global.postgresql.auth.secretKeys.adminPasswordKey Name of key in existing secret to use for PostgreSQL credentials (overrides `auth.secretKeys.adminPasswordKey`). Only used when `global.postgresql.auth.existingSecret` is set.
+    ## @param global.postgresql.auth.secretKeys.userPasswordKey Name of key in existing secret to use for PostgreSQL credentials (overrides `auth.secretKeys.userPasswordKey`). Only used when `global.postgresql.auth.existingSecret` is set.
+    ## @param global.postgresql.auth.secretKeys.replicationPasswordKey Name of key in existing secret to use for PostgreSQL credentials (overrides `auth.secretKeys.replicationPasswordKey`). Only used when `global.postgresql.auth.existingSecret` is set.
+    ##
+    auth:
+      postgresPassword: ""
+      username: ""
+      password: ""
+      database: ""
+      existingSecret: ""
+      secretKeys:
+        adminPasswordKey: ""
+        userPasswordKey: ""
+        replicationPasswordKey: ""
+    ## @param global.postgresql.service.ports.postgresql PostgreSQL service port (overrides `service.ports.postgresql`)
+    ##
+    service:
+      ports:
+        postgresql: ""
+
+## @section Common parameters
+##
+
+## @param kubeVersion Override Kubernetes version
+##
+kubeVersion: ""
+## @param nameOverride String to partially override common.names.fullname template (will maintain the release name)
+##
+nameOverride: ""
+## @param fullnameOverride String to fully override common.names.fullname template
+##
+fullnameOverride: ""
+## @param clusterDomain Kubernetes Cluster Domain
+##
+clusterDomain: cluster.local
+## @param extraDeploy Array of extra objects to deploy with the release (evaluated as a template)
+##
+extraDeploy: []
+## @param commonLabels Add labels to all the deployed resources
+##
+commonLabels: {}
+## @param commonAnnotations Add annotations to all the deployed resources
+##
+commonAnnotations: {}
+## Enable diagnostic mode in the statefulset
+##
+diagnosticMode:
+  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
+  ##
+  enabled: false
+  ## @param diagnosticMode.command Command to override all containers in the statefulset
+  ##
+  command:
+    - sleep
+  ## @param diagnosticMode.args Args to override all containers in the statefulset
+  ##
+  args:
+    - infinity
+
+## @section PostgreSQL common parameters
+##
+
+## Bitnami PostgreSQL image version
+## ref: https://hub.docker.com/r/bitnami/postgresql/tags/
+## @param image.registry PostgreSQL image registry
+## @param image.repository PostgreSQL image repository
+## @param image.tag PostgreSQL image tag (immutable tags are recommended)
+## @param image.digest PostgreSQL image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
+## @param image.pullPolicy PostgreSQL image pull policy
+## @param image.pullSecrets Specify image pull secrets
+## @param image.debug Specify if debug values should be set
+##
+image:
+  registry: docker.io
+  repository: bitnami/postgresql
+  tag: 15.3.0-debian-11-r7
+  digest: ""
+  ## Specify a imagePullPolicy
+  ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
+  ## ref: https://kubernetes.io/docs/user-guide/images/#pre-pulling-images
+  ##
+  pullPolicy: IfNotPresent
+  ## Optionally specify an array of imagePullSecrets.
+  ## Secrets must be manually created in the namespace.
+  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
+  ## Example:
+  ## pullSecrets:
+  ##   - myRegistryKeySecretName
+  ##
+  pullSecrets: []
+  ## Set to true if you would like to see extra information on logs
+  ##
+  debug: false
+## Authentication parameters
+## ref: https://github.com/bitnami/containers/tree/main/bitnami/postgresql#setting-the-root-password-on-first-run
+## ref: https://github.com/bitnami/containers/tree/main/bitnami/postgresql#creating-a-database-on-first-run
+## ref: https://github.com/bitnami/containers/tree/main/bitnami/postgresql#creating-a-database-user-on-first-run
+##
+auth:
+  ## @param auth.enablePostgresUser Assign a password to the "postgres" admin user. Otherwise, remote access will be blocked for this user
+  ##
+  enablePostgresUser: true
+  ## @param auth.postgresPassword Password for the "postgres" admin user. Ignored if `auth.existingSecret` is provided
+  ##
+  postgresPassword: ""
+  ## @param auth.username Name for a custom user to create
+  ##
+  username: ""
+  ## @param auth.password Password for the custom user to create. Ignored if `auth.existingSecret` is provided
+  ##
+  password: ""
+  ## @param auth.database Name for a custom database to create
+  ##
+  database: ""
+  ## @param auth.replicationUsername Name of the replication user
+  ##
+  replicationUsername: repl_user
+  ## @param auth.replicationPassword Password for the replication user. Ignored if `auth.existingSecret` is provided
+  ##
+  replicationPassword: ""
+  ## @param auth.existingSecret Name of existing secret to use for PostgreSQL credentials. `auth.postgresPassword`, `auth.password`, and `auth.replicationPassword` will be ignored and picked up from this secret. The secret might also contains the key `ldap-password` if LDAP is enabled. `ldap.bind_password` will be ignored and picked from this secret in this case.
+  ##
+  existingSecret: ""
+  ## @param auth.secretKeys.adminPasswordKey Name of key in existing secret to use for PostgreSQL credentials. Only used when `auth.existingSecret` is set.
+  ## @param auth.secretKeys.userPasswordKey Name of key in existing secret to use for PostgreSQL credentials. Only used when `auth.existingSecret` is set.
+  ## @param auth.secretKeys.replicationPasswordKey Name of key in existing secret to use for PostgreSQL credentials. Only used when `auth.existingSecret` is set.
+  ##
+  secretKeys:
+    adminPasswordKey: postgres-password
+    userPasswordKey: password
+    replicationPasswordKey: replication-password
+  ## @param auth.usePasswordFiles Mount credentials as a files instead of using an environment variable
+  ##
+  usePasswordFiles: false
+## @param architecture PostgreSQL architecture (`standalone` or `replication`)
+##
+architecture: standalone
+## Replication configuration
+## Ignored if `architecture` is `standalone`
+##
+replication:
+  ## @param replication.synchronousCommit Set synchronous commit mode. Allowed values: `on`, `remote_apply`, `remote_write`, `local` and `off`
+  ## @param replication.numSynchronousReplicas Number of replicas that will have synchronous replication. Note: Cannot be greater than `readReplicas.replicaCount`.
+  ## ref: https://www.postgresql.org/docs/current/runtime-config-wal.html#GUC-SYNCHRONOUS-COMMIT
+  ##
+  synchronousCommit: "off"
+  numSynchronousReplicas: 0
+  ## @param replication.applicationName Cluster application name. Useful for advanced replication settings
+  ##
+  applicationName: my_application
+## @param containerPorts.postgresql PostgreSQL container port
+##
+containerPorts:
+  postgresql: 5432
+## Audit settings
+## https://github.com/bitnami/containers/tree/main/bitnami/postgresql#auditing
+## @param audit.logHostname Log client hostnames
+## @param audit.logConnections Add client log-in operations to the log file
+## @param audit.logDisconnections Add client log-outs operations to the log file
+## @param audit.pgAuditLog Add operations to log using the pgAudit extension
+## @param audit.pgAuditLogCatalog Log catalog using pgAudit
+## @param audit.clientMinMessages Message log level to share with the user
+## @param audit.logLinePrefix Template for log line prefix (default if not set)
+## @param audit.logTimezone Timezone for the log timestamps
+##
+audit:
+  logHostname: false
+  logConnections: false
+  logDisconnections: false
+  pgAuditLog: ""
+  pgAuditLogCatalog: "off"
+  clientMinMessages: error
+  logLinePrefix: ""
+  logTimezone: ""
+## LDAP configuration
+## @param ldap.enabled Enable LDAP support
+## DEPRECATED ldap.url It will removed in a future, please use 'ldap.uri' instead
+## @param ldap.server IP address or name of the LDAP server.
+## @param ldap.port Port number on the LDAP server to connect to
+## @param ldap.prefix String to prepend to the user name when forming the DN to bind
+## @param ldap.suffix String to append to the user name when forming the DN to bind
+## DEPRECATED ldap.baseDN It will removed in a future, please use 'ldap.basedn' instead
+## DEPRECATED ldap.bindDN It will removed in a future, please use 'ldap.binddn' instead
+## DEPRECATED ldap.bind_password It will removed in a future, please use 'ldap.bindpw' instead
+## @param ldap.basedn Root DN to begin the search for the user in
+## @param ldap.binddn DN of user to bind to LDAP
+## @param ldap.bindpw Password for the user to bind to LDAP
+## DEPRECATED ldap.search_attr It will removed in a future, please use 'ldap.searchAttribute' instead
+## DEPRECATED ldap.search_filter It will removed in a future, please use 'ldap.searchFilter' instead
+## @param ldap.searchAttribute Attribute to match against the user name in the search
+## @param ldap.searchFilter The search filter to use when doing search+bind authentication
+## @param ldap.scheme Set to `ldaps` to use LDAPS
+## DEPRECATED ldap.tls as string is deprecated，please use 'ldap.tls.enabled' instead
+## @param ldap.tls.enabled Se to true to enable TLS encryption
+##
+ldap:
+  enabled: false
+  server: ""
+  port: ""
+  prefix: ""
+  suffix: ""
+  basedn: ""
+  binddn: ""
+  bindpw: ""
+  searchAttribute: ""
+  searchFilter: ""
+  scheme: ""
+  tls:
+    enabled: false
+  ## @param ldap.uri LDAP URL beginning in the form `ldap[s]://host[:port]/basedn`. If provided, all the other LDAP parameters will be ignored.
+  ## Ref: https://www.postgresql.org/docs/current/auth-ldap.html
+  ##
+  uri: ""
+## @param postgresqlDataDir PostgreSQL data dir folder
+##
+postgresqlDataDir: /bitnami/postgresql/data
+## @param postgresqlSharedPreloadLibraries Shared preload libraries (comma-separated list)
+##
+postgresqlSharedPreloadLibraries: "pgaudit"
+## Start PostgreSQL pod(s) without limitations on shm memory.
+## By default docker and containerd (and possibly other container runtimes) limit `/dev/shm` to `64M`
+## ref: https://github.com/docker-library/postgres/issues/416
+## ref: https://github.com/containerd/containerd/issues/3654
+##
+shmVolume:
+  ## @param shmVolume.enabled Enable emptyDir volume for /dev/shm for PostgreSQL pod(s)
+  ##
+  enabled: true
+  ## @param shmVolume.sizeLimit Set this to enable a size limit on the shm tmpfs
+  ## Note: the size of the tmpfs counts against container's memory limit
+  ## e.g:
+  ## sizeLimit: 1Gi
+  ##
+  sizeLimit: ""
+## TLS configuration
+##
+tls:
+  ## @param tls.enabled Enable TLS traffic support
+  ##
+  enabled: false
+  ## @param tls.autoGenerated Generate automatically self-signed TLS certificates
+  ##
+  autoGenerated: false
+  ## @param tls.preferServerCiphers Whether to use the server's TLS cipher preferences rather than the client's
+  ##
+  preferServerCiphers: true
+  ## @param tls.certificatesSecret Name of an existing secret that contains the certificates
+  ##
+  certificatesSecret: ""
+  ## @param tls.certFilename Certificate filename
+  ##
+  certFilename: ""
+  ## @param tls.certKeyFilename Certificate key filename
+  ##
+  certKeyFilename: ""
+  ## @param tls.certCAFilename CA Certificate filename
+  ## If provided, PostgreSQL will authenticate TLS/SSL clients by requesting them a certificate
+  ## ref: https://www.postgresql.org/docs/9.6/auth-methods.html
+  ##
+  certCAFilename: ""
+  ## @param tls.crlFilename File containing a Certificate Revocation List
+  ##
+  crlFilename: ""
+
+## @section PostgreSQL Primary parameters
+##
+primary:
+  ## @param primary.name Name of the primary database (eg primary, master, leader, ...)
+  ##
+  name: primary
+  ## @param primary.configuration PostgreSQL Primary main configuration to be injected as ConfigMap
+  ## ref: https://www.postgresql.org/docs/current/static/runtime-config.html
+  ##
+  configuration: ""
+  ## @param primary.pgHbaConfiguration PostgreSQL Primary client authentication configuration
+  ## ref: https://www.postgresql.org/docs/current/static/auth-pg-hba-conf.html
+  ## e.g:#
+  ## pgHbaConfiguration: |-
+  ##   local all all trust
+  ##   host all all localhost trust
+  ##   host mydatabase mysuser 192.168.0.0/24 md5
+  ##
+  pgHbaConfiguration: ""
+  ## @param primary.existingConfigmap Name of an existing ConfigMap with PostgreSQL Primary configuration
+  ## NOTE: `primary.configuration` and `primary.pgHbaConfiguration` will be ignored
+  ##
+  existingConfigmap: ""
+  ## @param primary.extendedConfiguration Extended PostgreSQL Primary configuration (appended to main or default configuration)
+  ## ref: https://github.com/bitnami/containers/tree/main/bitnami/postgresql#allow-settings-to-be-loaded-from-files-other-than-the-default-postgresqlconf
+  ##
+  extendedConfiguration: ""
+  ## @param primary.existingExtendedConfigmap Name of an existing ConfigMap with PostgreSQL Primary extended configuration
+  ## NOTE: `primary.extendedConfiguration` will be ignored
+  ##
+  existingExtendedConfigmap: ""
+  ## Initdb configuration
+  ## ref: https://github.com/bitnami/containers/tree/main/bitnami/postgresql#specifying-initdb-arguments
+  ##
+  initdb:
+    ## @param primary.initdb.args PostgreSQL initdb extra arguments
+    ##
+    args: ""
+    ## @param primary.initdb.postgresqlWalDir Specify a custom location for the PostgreSQL transaction log
+    ##
+    postgresqlWalDir: ""
+    ## @param primary.initdb.scripts Dictionary of initdb scripts
+    ## Specify dictionary of scripts to be run at first boot
+    ## e.g:
+    ## scripts:
+    ##   my_init_script.sh: |
+    ##      #!/bin/sh
+    ##      echo "Do something."
+    ##
+    scripts: {}
+    ## @param primary.initdb.scriptsConfigMap ConfigMap with scripts to be run at first boot
+    ## NOTE: This will override `primary.initdb.scripts`
+    ##
+    scriptsConfigMap: ""
+    ## @param primary.initdb.scriptsSecret Secret with scripts to be run at first boot (in case it contains sensitive information)
+    ## NOTE: This can work along `primary.initdb.scripts` or `primary.initdb.scriptsConfigMap`
+    ##
+    scriptsSecret: ""
+    ## @param primary.initdb.user Specify the PostgreSQL username to execute the initdb scripts
+    ##
+    user: ""
+    ## @param primary.initdb.password Specify the PostgreSQL password to execute the initdb scripts
+    ##
+    password: ""
+  ## Configure current cluster's primary server to be the standby server in other cluster.
+  ## This will allow cross cluster replication and provide cross cluster high availability.
+  ## You will need to configure pgHbaConfiguration if you want to enable this feature with local cluster replication enabled.
+  ## @param primary.standby.enabled Whether to enable current cluster's primary as standby server of another cluster or not
+  ## @param primary.standby.primaryHost The Host of replication primary in the other cluster
+  ## @param primary.standby.primaryPort The Port of replication primary in the other cluster
+  ##
+  standby:
+    enabled: false
+    primaryHost: ""
+    primaryPort: ""
+  ## @param primary.extraEnvVars Array with extra environment variables to add to PostgreSQL Primary nodes
+  ## e.g:
+  ## extraEnvVars:
+  ##   - name: FOO
+  ##     value: "bar"
+  ##
+  extraEnvVars: []
+  ## @param primary.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for PostgreSQL Primary nodes
+  ##
+  extraEnvVarsCM: ""
+  ## @param primary.extraEnvVarsSecret Name of existing Secret containing extra env vars for PostgreSQL Primary nodes
+  ##
+  extraEnvVarsSecret: ""
+  ## @param primary.command Override default container command (useful when using custom images)
+  ##
+  command: []
+  ## @param primary.args Override default container args (useful when using custom images)
+  ##
+  args: []
+  ## Configure extra options for PostgreSQL Primary containers' liveness, readiness and startup probes
+  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes
+  ## @param primary.livenessProbe.enabled Enable livenessProbe on PostgreSQL Primary containers
+  ## @param primary.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
+  ## @param primary.livenessProbe.periodSeconds Period seconds for livenessProbe
+  ## @param primary.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
+  ## @param primary.livenessProbe.failureThreshold Failure threshold for livenessProbe
+  ## @param primary.livenessProbe.successThreshold Success threshold for livenessProbe
+  ##
+  livenessProbe:
+    enabled: true
+    initialDelaySeconds: 30
+    periodSeconds: 10
+    timeoutSeconds: 5
+    failureThreshold: 6
+    successThreshold: 1
+  ## @param primary.readinessProbe.enabled Enable readinessProbe on PostgreSQL Primary containers
+  ## @param primary.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
+  ## @param primary.readinessProbe.periodSeconds Period seconds for readinessProbe
+  ## @param primary.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
+  ## @param primary.readinessProbe.failureThreshold Failure threshold for readinessProbe
+  ## @param primary.readinessProbe.successThreshold Success threshold for readinessProbe
+  ##
+  readinessProbe:
+    enabled: true
+    initialDelaySeconds: 5
+    periodSeconds: 10
+    timeoutSeconds: 5
+    failureThreshold: 6
+    successThreshold: 1
+  ## @param primary.startupProbe.enabled Enable startupProbe on PostgreSQL Primary containers
+  ## @param primary.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
+  ## @param primary.startupProbe.periodSeconds Period seconds for startupProbe
+  ## @param primary.startupProbe.timeoutSeconds Timeout seconds for startupProbe
+  ## @param primary.startupProbe.failureThreshold Failure threshold for startupProbe
+  ## @param primary.startupProbe.successThreshold Success threshold for startupProbe
+  ##
+  startupProbe:
+    enabled: false
+    initialDelaySeconds: 30
+    periodSeconds: 10
+    timeoutSeconds: 1
+    failureThreshold: 15
+    successThreshold: 1
+  ## @param primary.customLivenessProbe Custom livenessProbe that overrides the default one
+  ##
+  customLivenessProbe: {}
+  ## @param primary.customReadinessProbe Custom readinessProbe that overrides the default one
+  ##
+  customReadinessProbe: {}
+  ## @param primary.customStartupProbe Custom startupProbe that overrides the default one
+  ##
+  customStartupProbe: {}
+  ## @param primary.lifecycleHooks for the PostgreSQL Primary container to automate configuration before or after startup
+  ##
+  lifecycleHooks: {}
+  ## PostgreSQL Primary resource requests and limits
+  ## ref: https://kubernetes.io/docs/user-guide/compute-resources/
+  ## @param primary.resources.limits The resources limits for the PostgreSQL Primary containers
+  ## @param primary.resources.requests.memory The requested memory for the PostgreSQL Primary containers
+  ## @param primary.resources.requests.cpu The requested cpu for the PostgreSQL Primary containers
+  ##
+  resources:
+    limits: {}
+    requests:
+      memory: 256Mi
+      cpu: 250m
+  ## Pod Security Context
+  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
+  ## @param primary.podSecurityContext.enabled Enable security context
+  ## @param primary.podSecurityContext.fsGroup Group ID for the pod
+  ##
+  podSecurityContext:
+    enabled: true
+    fsGroup: 1001
+  ## Container Security Context
+  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
+  ## @param primary.containerSecurityContext.enabled Enable container security context
+  ## @param primary.containerSecurityContext.runAsUser User ID for the container
+  ##
+  containerSecurityContext:
+    enabled: true
+    runAsUser: 1001
+  ## @param primary.hostAliases PostgreSQL primary pods host aliases
+  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
+  ##
+  hostAliases: []
+  ## @param primary.hostNetwork Specify if host network should be enabled for PostgreSQL pod (postgresql primary)
+  ##
+  hostNetwork: false
+  ## @param primary.hostIPC Specify if host IPC should be enabled for PostgreSQL pod (postgresql primary)
+  ##
+  hostIPC: false
+  ## @param primary.labels Map of labels to add to the statefulset (postgresql primary)
+  ##
+  labels: {}
+  ## @param primary.annotations Annotations for PostgreSQL primary pods
+  ##
+  annotations: {}
+  ## @param primary.podLabels Map of labels to add to the pods (postgresql primary)
+  ##
+  podLabels: {}
+  ## @param primary.podAnnotations Map of annotations to add to the pods (postgresql primary)
+  ##
+  podAnnotations: {}
+  ## @param primary.podAffinityPreset PostgreSQL primary pod affinity preset. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard`
+  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
+  ##
+  podAffinityPreset: ""
+  ## @param primary.podAntiAffinityPreset PostgreSQL primary pod anti-affinity preset. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard`
+  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
+  ##
+  podAntiAffinityPreset: soft
+  ## PostgreSQL Primary node affinity preset
+  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
+  ##
+  nodeAffinityPreset:
+    ## @param primary.nodeAffinityPreset.type PostgreSQL primary node affinity preset type. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard`
+    ##
+    type: ""
+    ## @param primary.nodeAffinityPreset.key PostgreSQL primary node label key to match Ignored if `primary.affinity` is set.
+    ## E.g.
+    ## key: "kubernetes.io/e2e-az-name"
+    ##
+    key: ""
+    ## @param primary.nodeAffinityPreset.values PostgreSQL primary node label values to match. Ignored if `primary.affinity` is set.
+    ## E.g.
+    ## values:
+    ##   - e2e-az1
+    ##   - e2e-az2
+    ##
+    values: []
+  ## @param primary.affinity Affinity for PostgreSQL primary pods assignment
+  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
+  ## Note: primary.podAffinityPreset, primary.podAntiAffinityPreset, and primary.nodeAffinityPreset will be ignored when it's set
+  ##
+  affinity: {}
+  ## @param primary.nodeSelector Node labels for PostgreSQL primary pods assignment
+  ## ref: https://kubernetes.io/docs/user-guide/node-selection/
+  ##
+  nodeSelector: {}
+  ## @param primary.tolerations Tolerations for PostgreSQL primary pods assignment
+  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
+  ##
+  tolerations: []
+  ## @param primary.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template
+  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
+  ##
+  topologySpreadConstraints: []
+  ## @param primary.priorityClassName Priority Class to use for each pod (postgresql primary)
+  ##
+  priorityClassName: ""
+  ## @param primary.schedulerName Use an alternate scheduler, e.g. "stork".
+  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
+  ##
+  schedulerName: ""
+  ## @param primary.terminationGracePeriodSeconds Seconds PostgreSQL primary pod needs to terminate gracefully
+  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
+  ##
+  terminationGracePeriodSeconds: ""
+  ## @param primary.updateStrategy.type PostgreSQL Primary statefulset strategy type
+  ## @param primary.updateStrategy.rollingUpdate PostgreSQL Primary statefulset rolling update configuration parameters
+  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
+  ##
+  updateStrategy:
+    type: RollingUpdate
+    rollingUpdate: {}
+  ## @param primary.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the PostgreSQL Primary container(s)
+  ##
+  extraVolumeMounts: []
+  ## @param primary.extraVolumes Optionally specify extra list of additional volumes for the PostgreSQL Primary pod(s)
+  ##
+  extraVolumes: []
+  ## @param primary.sidecars Add additional sidecar containers to the PostgreSQL Primary pod(s)
+  ## For example:
+  ## sidecars:
+  ##   - name: your-image-name
+  ##     image: your-image
+  ##     imagePullPolicy: Always
+  ##     ports:
+  ##       - name: portname
+  ##         containerPort: 1234
+  ##
+  sidecars: []
+  ## @param primary.initContainers Add additional init containers to the PostgreSQL Primary pod(s)
+  ## Example
+  ##
+  ## initContainers:
+  ##   - name: do-something
+  ##     image: busybox
+  ##     command: ['do', 'something']
+  ##
+  initContainers: []
+  ## @param primary.extraPodSpec Optionally specify extra PodSpec for the PostgreSQL Primary pod(s)
+  ##
+  extraPodSpec: {}
+  ## PostgreSQL Primary service configuration
+  ##
+  service:
+    ## @param primary.service.type Kubernetes Service type
+    ##
+    type: ClusterIP
+    ## @param primary.service.ports.postgresql PostgreSQL service port
+    ##
+    ports:
+      postgresql: 5432
+    ## Node ports to expose
+    ## NOTE: choose port between <30000-32767>
+    ## @param primary.service.nodePorts.postgresql Node port for PostgreSQL
+    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
+    ##
+    nodePorts:
+      postgresql: ""
+    ## @param primary.service.clusterIP Static clusterIP or None for headless services
+    ## e.g:
+    ## clusterIP: None
+    ##
+    clusterIP: ""
+    ## @param primary.service.annotations Annotations for PostgreSQL primary service
+    ##
+    annotations: {}
+    ## @param primary.service.loadBalancerIP Load balancer IP if service type is `LoadBalancer`
+    ## Set the LoadBalancer service type to internal only
+    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
+    ##
+    loadBalancerIP: ""
+    ## @param primary.service.externalTrafficPolicy Enable client source IP preservation
+    ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
+    ##
+    externalTrafficPolicy: Cluster
+    ## @param primary.service.loadBalancerSourceRanges Addresses that are allowed when service is LoadBalancer
+    ## https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
+    ##
+    ## loadBalancerSourceRanges:
+    ## - 10.10.10.0/24
+    ##
+    loadBalancerSourceRanges: []
+    ## @param primary.service.extraPorts Extra ports to expose in the PostgreSQL primary service
+    ##
+    extraPorts: []
+    ## @param primary.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
+    ## If "ClientIP", consecutive client requests will be directed to the same Pod
+    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
+    ##
+    sessionAffinity: None
+    ## @param primary.service.sessionAffinityConfig Additional settings for the sessionAffinity
+    ## sessionAffinityConfig:
+    ##   clientIP:
+    ##     timeoutSeconds: 300
+    ##
+    sessionAffinityConfig: {}
+    ## Headless service properties
+    ##
+    headless:
+      ## @param primary.service.headless.annotations Additional custom annotations for headless PostgreSQL primary service
+      ##
+      annotations: {}
+  ## PostgreSQL Primary persistence configuration
+  ##
+  persistence:
+    ## @param primary.persistence.enabled Enable PostgreSQL Primary data persistence using PVC
+    ##
+    enabled: true
+    ## @param primary.persistence.existingClaim Name of an existing PVC to use
+    ##
+    existingClaim: ""
+    ## @param primary.persistence.mountPath The path the volume will be mounted at
+    ## Note: useful when using custom PostgreSQL images
+    ##
+    mountPath: /bitnami/postgresql
+    ## @param primary.persistence.subPath The subdirectory of the volume to mount to
+    ## Useful in dev environments and one PV for multiple services
+    ##
+    subPath: ""
+    ## @param primary.persistence.storageClass PVC Storage Class for PostgreSQL Primary data volume
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    ##
+    storageClass: ""
+    ## @param primary.persistence.accessModes PVC Access Mode for PostgreSQL volume
+    ##
+    accessModes:
+      - ReadWriteOnce
+    ## @param primary.persistence.size PVC Storage Request for PostgreSQL volume
+    ##
+    size: 8Gi
+    ## @param primary.persistence.annotations Annotations for the PVC
+    ##
+    annotations: {}
+    ## @param primary.persistence.labels Labels for the PVC
+    ##
+    labels: {}
+    ## @param primary.persistence.selector Selector to match an existing Persistent Volume (this value is evaluated as a template)
+    ## selector:
+    ##   matchLabels:
+    ##     app: my-app
+    ##
+    selector: {}
+    ## @param primary.persistence.dataSource Custom PVC data source
+    ##
+    dataSource: {}
+
+## @section PostgreSQL read only replica parameters (only used when `architecture` is set to `replication`)
+##
+readReplicas:
+  ## @param readReplicas.name Name of the read replicas database (eg secondary, slave, ...)
+  ##
+  name: read
+  ## @param readReplicas.replicaCount Number of PostgreSQL read only replicas
+  ##
+  replicaCount: 1
+  ## @param readReplicas.extendedConfiguration Extended PostgreSQL read only replicas configuration (appended to main or default configuration)
+  ## ref: https://github.com/bitnami/containers/tree/main/bitnami/postgresql#allow-settings-to-be-loaded-from-files-other-than-the-default-postgresqlconf
+  ##
+  extendedConfiguration: ""
+  ## @param readReplicas.extraEnvVars Array with extra environment variables to add to PostgreSQL read only nodes
+  ## e.g:
+  ## extraEnvVars:
+  ##   - name: FOO
+  ##     value: "bar"
+  ##
+  extraEnvVars: []
+  ## @param readReplicas.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for PostgreSQL read only nodes
+  ##
+  extraEnvVarsCM: ""
+  ## @param readReplicas.extraEnvVarsSecret Name of existing Secret containing extra env vars for PostgreSQL read only nodes
+  ##
+  extraEnvVarsSecret: ""
+  ## @param readReplicas.command Override default container command (useful when using custom images)
+  ##
+  command: []
+  ## @param readReplicas.args Override default container args (useful when using custom images)
+  ##
+  args: []
+  ## Configure extra options for PostgreSQL read only containers' liveness, readiness and startup probes
+  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes
+  ## @param readReplicas.livenessProbe.enabled Enable livenessProbe on PostgreSQL read only containers
+  ## @param readReplicas.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
+  ## @param readReplicas.livenessProbe.periodSeconds Period seconds for livenessProbe
+  ## @param readReplicas.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
+  ## @param readReplicas.livenessProbe.failureThreshold Failure threshold for livenessProbe
+  ## @param readReplicas.livenessProbe.successThreshold Success threshold for livenessProbe
+  ##
+  livenessProbe:
+    enabled: true
+    initialDelaySeconds: 30
+    periodSeconds: 10
+    timeoutSeconds: 5
+    failureThreshold: 6
+    successThreshold: 1
+  ## @param readReplicas.readinessProbe.enabled Enable readinessProbe on PostgreSQL read only containers
+  ## @param readReplicas.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
+  ## @param readReplicas.readinessProbe.periodSeconds Period seconds for readinessProbe
+  ## @param readReplicas.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
+  ## @param readReplicas.readinessProbe.failureThreshold Failure threshold for readinessProbe
+  ## @param readReplicas.readinessProbe.successThreshold Success threshold for readinessProbe
+  ##
+  readinessProbe:
+    enabled: true
+    initialDelaySeconds: 5
+    periodSeconds: 10
+    timeoutSeconds: 5
+    failureThreshold: 6
+    successThreshold: 1
+  ## @param readReplicas.startupProbe.enabled Enable startupProbe on PostgreSQL read only containers
+  ## @param readReplicas.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
+  ## @param readReplicas.startupProbe.periodSeconds Period seconds for startupProbe
+  ## @param readReplicas.startupProbe.timeoutSeconds Timeout seconds for startupProbe
+  ## @param readReplicas.startupProbe.failureThreshold Failure threshold for startupProbe
+  ## @param readReplicas.startupProbe.successThreshold Success threshold for startupProbe
+  ##
+  startupProbe:
+    enabled: false
+    initialDelaySeconds: 30
+    periodSeconds: 10
+    timeoutSeconds: 1
+    failureThreshold: 15
+    successThreshold: 1
+  ## @param readReplicas.customLivenessProbe Custom livenessProbe that overrides the default one
+  ##
+  customLivenessProbe: {}
+  ## @param readReplicas.customReadinessProbe Custom readinessProbe that overrides the default one
+  ##
+  customReadinessProbe: {}
+  ## @param readReplicas.customStartupProbe Custom startupProbe that overrides the default one
+  ##
+  customStartupProbe: {}
+  ## @param readReplicas.lifecycleHooks for the PostgreSQL read only container to automate configuration before or after startup
+  ##
+  lifecycleHooks: {}
+  ## PostgreSQL read only resource requests and limits
+  ## ref: https://kubernetes.io/docs/user-guide/compute-resources/
+  ## @param readReplicas.resources.limits The resources limits for the PostgreSQL read only containers
+  ## @param readReplicas.resources.requests.memory The requested memory for the PostgreSQL read only containers
+  ## @param readReplicas.resources.requests.cpu The requested cpu for the PostgreSQL read only containers
+  ##
+  resources:
+    limits: {}
+    requests:
+      memory: 256Mi
+      cpu: 250m
+  ## Pod Security Context
+  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
+  ## @param readReplicas.podSecurityContext.enabled Enable security context
+  ## @param readReplicas.podSecurityContext.fsGroup Group ID for the pod
+  ##
+  podSecurityContext:
+    enabled: true
+    fsGroup: 1001
+  ## Container Security Context
+  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
+  ## @param readReplicas.containerSecurityContext.enabled Enable container security context
+  ## @param readReplicas.containerSecurityContext.runAsUser User ID for the container
+  ##
+  containerSecurityContext:
+    enabled: true
+    runAsUser: 1001
+  ## @param readReplicas.hostAliases PostgreSQL read only pods host aliases
+  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
+  ##
+  hostAliases: []
+  ## @param readReplicas.hostNetwork Specify if host network should be enabled for PostgreSQL pod (PostgreSQL read only)
+  ##
+  hostNetwork: false
+  ## @param readReplicas.hostIPC Specify if host IPC should be enabled for PostgreSQL pod (postgresql primary)
+  ##
+  hostIPC: false
+  ## @param readReplicas.labels Map of labels to add to the statefulset (PostgreSQL read only)
+  ##
+  labels: {}
+  ## @param readReplicas.annotations Annotations for PostgreSQL read only pods
+  ##
+  annotations: {}
+  ## @param readReplicas.podLabels Map of labels to add to the pods (PostgreSQL read only)
+  ##
+  podLabels: {}
+  ## @param readReplicas.podAnnotations Map of annotations to add to the pods (PostgreSQL read only)
+  ##
+  podAnnotations: {}
+  ## @param readReplicas.podAffinityPreset PostgreSQL read only pod affinity preset. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard`
+  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
+  ##
+  podAffinityPreset: ""
+  ## @param readReplicas.podAntiAffinityPreset PostgreSQL read only pod anti-affinity preset. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard`
+  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
+  ##
+  podAntiAffinityPreset: soft
+  ## PostgreSQL read only node affinity preset
+  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
+  ##
+  nodeAffinityPreset:
+    ## @param readReplicas.nodeAffinityPreset.type PostgreSQL read only node affinity preset type. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard`
+    ##
+    type: ""
+    ## @param readReplicas.nodeAffinityPreset.key PostgreSQL read only node label key to match Ignored if `primary.affinity` is set.
+    ## E.g.
+    ## key: "kubernetes.io/e2e-az-name"
+    ##
+    key: ""
+    ## @param readReplicas.nodeAffinityPreset.values PostgreSQL read only node label values to match. Ignored if `primary.affinity` is set.
+    ## E.g.
+    ## values:
+    ##   - e2e-az1
+    ##   - e2e-az2
+    ##
+    values: []
+  ## @param readReplicas.affinity Affinity for PostgreSQL read only pods assignment
+  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
+  ## Note: primary.podAffinityPreset, primary.podAntiAffinityPreset, and primary.nodeAffinityPreset will be ignored when it's set
+  ##
+  affinity: {}
+  ## @param readReplicas.nodeSelector Node labels for PostgreSQL read only pods assignment
+  ## ref: https://kubernetes.io/docs/user-guide/node-selection/
+  ##
+  nodeSelector: {}
+  ## @param readReplicas.tolerations Tolerations for PostgreSQL read only pods assignment
+  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
+  ##
+  tolerations: []
+  ## @param readReplicas.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template
+  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
+  ##
+  topologySpreadConstraints: []
+  ## @param readReplicas.priorityClassName Priority Class to use for each pod (PostgreSQL read only)
+  ##
+  priorityClassName: ""
+  ## @param readReplicas.schedulerName Use an alternate scheduler, e.g. "stork".
+  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
+  ##
+  schedulerName: ""
+  ## @param readReplicas.terminationGracePeriodSeconds Seconds PostgreSQL read only pod needs to terminate gracefully
+  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
+  ##
+  terminationGracePeriodSeconds: ""
+  ## @param readReplicas.updateStrategy.type PostgreSQL read only statefulset strategy type
+  ## @param readReplicas.updateStrategy.rollingUpdate PostgreSQL read only statefulset rolling update configuration parameters
+  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
+  ##
+  updateStrategy:
+    type: RollingUpdate
+    rollingUpdate: {}
+  ## @param readReplicas.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the PostgreSQL read only container(s)
+  ##
+  extraVolumeMounts: []
+  ## @param readReplicas.extraVolumes Optionally specify extra list of additional volumes for the PostgreSQL read only pod(s)
+  ##
+  extraVolumes: []
+  ## @param readReplicas.sidecars Add additional sidecar containers to the PostgreSQL read only pod(s)
+  ## For example:
+  ## sidecars:
+  ##   - name: your-image-name
+  ##     image: your-image
+  ##     imagePullPolicy: Always
+  ##     ports:
+  ##       - name: portname
+  ##         containerPort: 1234
+  ##
+  sidecars: []
+  ## @param readReplicas.initContainers Add additional init containers to the PostgreSQL read only pod(s)
+  ## Example
+  ##
+  ## initContainers:
+  ##   - name: do-something
+  ##     image: busybox
+  ##     command: ['do', 'something']
+  ##
+  initContainers: []
+  ## @param readReplicas.extraPodSpec Optionally specify extra PodSpec for the PostgreSQL read only pod(s)
+  ##
+  extraPodSpec: {}
+  ## PostgreSQL read only service configuration
+  ##
+  service:
+    ## @param readReplicas.service.type Kubernetes Service type
+    ##
+    type: ClusterIP
+    ## @param readReplicas.service.ports.postgresql PostgreSQL service port
+    ##
+    ports:
+      postgresql: 5432
+    ## Node ports to expose
+    ## NOTE: choose port between <30000-32767>
+    ## @param readReplicas.service.nodePorts.postgresql Node port for PostgreSQL
+    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
+    ##
+    nodePorts:
+      postgresql: ""
+    ## @param readReplicas.service.clusterIP Static clusterIP or None for headless services
+    ## e.g:
+    ## clusterIP: None
+    ##
+    clusterIP: ""
+    ## @param readReplicas.service.annotations Annotations for PostgreSQL read only service
+    ##
+    annotations: {}
+    ## @param readReplicas.service.loadBalancerIP Load balancer IP if service type is `LoadBalancer`
+    ## Set the LoadBalancer service type to internal only
+    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
+    ##
+    loadBalancerIP: ""
+    ## @param readReplicas.service.externalTrafficPolicy Enable client source IP preservation
+    ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
+    ##
+    externalTrafficPolicy: Cluster
+    ## @param readReplicas.service.loadBalancerSourceRanges Addresses that are allowed when service is LoadBalancer
+    ## https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
+    ##
+    ## loadBalancerSourceRanges:
+    ## - 10.10.10.0/24
+    ##
+    loadBalancerSourceRanges: []
+    ## @param readReplicas.service.extraPorts Extra ports to expose in the PostgreSQL read only service
+    ##
+    extraPorts: []
+    ## @param readReplicas.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
+    ## If "ClientIP", consecutive client requests will be directed to the same Pod
+    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
+    ##
+    sessionAffinity: None
+    ## @param readReplicas.service.sessionAffinityConfig Additional settings for the sessionAffinity
+    ## sessionAffinityConfig:
+    ##   clientIP:
+    ##     timeoutSeconds: 300
+    ##
+    sessionAffinityConfig: {}
+    ## Headless service properties
+    ##
+    headless:
+      ## @param readReplicas.service.headless.annotations Additional custom annotations for headless PostgreSQL read only service
+      ##
+      annotations: {}
+  ## PostgreSQL read only persistence configuration
+  ##
+  persistence:
+    ## @param readReplicas.persistence.enabled Enable PostgreSQL read only data persistence using PVC
+    ##
+    enabled: true
+    ## @param readReplicas.persistence.existingClaim Name of an existing PVC to use
+    ##
+    existingClaim: ""
+    ## @param readReplicas.persistence.mountPath The path the volume will be mounted at
+    ## Note: useful when using custom PostgreSQL images
+    ##
+    mountPath: /bitnami/postgresql
+    ## @param readReplicas.persistence.subPath The subdirectory of the volume to mount to
+    ## Useful in dev environments and one PV for multiple services
+    ##
+    subPath: ""
+    ## @param readReplicas.persistence.storageClass PVC Storage Class for PostgreSQL read only data volume
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    ##
+    storageClass: ""
+    ## @param readReplicas.persistence.accessModes PVC Access Mode for PostgreSQL volume
+    ##
+    accessModes:
+      - ReadWriteOnce
+    ## @param readReplicas.persistence.size PVC Storage Request for PostgreSQL volume
+    ##
+    size: 8Gi
+    ## @param readReplicas.persistence.annotations Annotations for the PVC
+    ##
+    annotations: {}
+    ## @param readReplicas.persistence.labels Labels for the PVC
+    ##
+    labels: {}
+    ## @param readReplicas.persistence.selector Selector to match an existing Persistent Volume (this value is evaluated as a template)
+    ## selector:
+    ##   matchLabels:
+    ##     app: my-app
+    ##
+    selector: {}
+    ## @param readReplicas.persistence.dataSource Custom PVC data source
+    ##
+    dataSource: {}
+
+## @section NetworkPolicy parameters
+##
+
+## Add networkpolicies
+##
+networkPolicy:
+  ## @param networkPolicy.enabled Enable network policies
+  ##
+  enabled: false
+  ## @param networkPolicy.metrics.enabled Enable network policies for metrics (prometheus)
+  ## @param networkPolicy.metrics.namespaceSelector [object] Monitoring namespace selector labels. These labels will be used to identify the prometheus' namespace.
+  ## @param networkPolicy.metrics.podSelector [object] Monitoring pod selector labels. These labels will be used to identify the Prometheus pods.
+  ##
+  metrics:
+    enabled: false
+    ## e.g:
+    ## namespaceSelector:
+    ##   label: monitoring
+    ##
+    namespaceSelector: {}
+    ## e.g:
+    ## podSelector:
+    ##   label: monitoring
+    ##
+    podSelector: {}
+  ## Ingress Rules
+  ##
+  ingressRules:
+    ## @param networkPolicy.ingressRules.primaryAccessOnlyFrom.enabled Enable ingress rule that makes PostgreSQL primary node only accessible from a particular origin.
+    ## @param networkPolicy.ingressRules.primaryAccessOnlyFrom.namespaceSelector [object] Namespace selector label that is allowed to access the PostgreSQL primary node. This label will be used to identified the allowed namespace(s).
+    ## @param networkPolicy.ingressRules.primaryAccessOnlyFrom.podSelector [object] Pods selector label that is allowed to access the PostgreSQL primary node. This label will be used to identified the allowed pod(s).
+    ## @param networkPolicy.ingressRules.primaryAccessOnlyFrom.customRules Custom network policy for the PostgreSQL primary node.
+    ##
+    primaryAccessOnlyFrom:
+      enabled: false
+      ## e.g:
+      ## namespaceSelector:
+      ##   label: ingress
+      ##
+      namespaceSelector: {}
+      ## e.g:
+      ## podSelector:
+      ##   label: access
+      ##
+      podSelector: {}
+      ## custom ingress rules
+      ## e.g:
+      ## customRules:
+      ##   - from:
+      ##       - namespaceSelector:
+      ##           matchLabels:
+      ##             label: example
+      ##
+      customRules: []
+    ## @param networkPolicy.ingressRules.readReplicasAccessOnlyFrom.enabled Enable ingress rule that makes PostgreSQL read-only nodes only accessible from a particular origin.
+    ## @param networkPolicy.ingressRules.readReplicasAccessOnlyFrom.namespaceSelector [object] Namespace selector label that is allowed to access the PostgreSQL read-only nodes. This label will be used to identified the allowed namespace(s).
+    ## @param networkPolicy.ingressRules.readReplicasAccessOnlyFrom.podSelector [object] Pods selector label that is allowed to access the PostgreSQL read-only nodes. This label will be used to identified the allowed pod(s).
+    ## @param networkPolicy.ingressRules.readReplicasAccessOnlyFrom.customRules Custom network policy for the PostgreSQL read-only nodes.
+    ##
+    readReplicasAccessOnlyFrom:
+      enabled: false
+      ## e.g:
+      ## namespaceSelector:
+      ##   label: ingress
+      ##
+      namespaceSelector: {}
+      ## e.g:
+      ## podSelector:
+      ##   label: access
+      ##
+      podSelector: {}
+      ## custom ingress rules
+      ## e.g:
+      ## CustomRules:
+      ##   - from:
+      ##       - namespaceSelector:
+      ##           matchLabels:
+      ##             label: example
+      ##
+      customRules: []
+  ## @param networkPolicy.egressRules.denyConnectionsToExternal Enable egress rule that denies outgoing traffic outside the cluster, except for DNS (port 53).
+  ## @param networkPolicy.egressRules.customRules Custom network policy rule
+  ##
+  egressRules:
+    # Deny connections to external. This is not compatible with an external database.
+    denyConnectionsToExternal: false
+    ## Additional custom egress rules
+    ## e.g:
+    ## customRules:
+    ##   - to:
+    ##       - namespaceSelector:
+    ##           matchLabels:
+    ##             label: example
+    ##
+    customRules: []
+
+## @section Volume Permissions parameters
+##
+
+## Init containers parameters:
+## volumePermissions: Change the owner and group of the persistent volume(s) mountpoint(s) to 'runAsUser:fsGroup' on each node
+##
+volumePermissions:
+  ## @param volumePermissions.enabled Enable init container that changes the owner and group of the persistent volume
+  ##
+  enabled: false
+  ## @param volumePermissions.image.registry Init container volume-permissions image registry
+  ## @param volumePermissions.image.repository Init container volume-permissions image repository
+  ## @param volumePermissions.image.tag Init container volume-permissions image tag (immutable tags are recommended)
+  ## @param volumePermissions.image.digest Init container volume-permissions image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
+  ## @param volumePermissions.image.pullPolicy Init container volume-permissions image pull policy
+  ## @param volumePermissions.image.pullSecrets Init container volume-permissions image pull secrets
+  ##
+  image:
+    registry: docker.io
+    repository: bitnami/bitnami-shell
+    tag: 11-debian-11-r120
+    digest: ""
+    pullPolicy: IfNotPresent
+    ## Optionally specify an array of imagePullSecrets.
+    ## Secrets must be manually created in the namespace.
+    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
+    ## Example:
+    ## pullSecrets:
+    ##   - myRegistryKeySecretName
+    ##
+    pullSecrets: []
+  ## Init container resource requests and limits
+  ## ref: https://kubernetes.io/docs/user-guide/compute-resources/
+  ## @param volumePermissions.resources.limits Init container volume-permissions resource limits
+  ## @param volumePermissions.resources.requests Init container volume-permissions resource requests
+  ##
+  resources:
+    limits: {}
+    requests: {}
+  ## Init container' Security Context
+  ## Note: the chown of the data folder is done to containerSecurityContext.runAsUser
+  ## and not the below volumePermissions.containerSecurityContext.runAsUser
+  ## @param volumePermissions.containerSecurityContext.runAsUser User ID for the init container
+  ##
+  containerSecurityContext:
+    runAsUser: 0
+
+## @section Other Parameters
+##
+
+## @param serviceBindings.enabled Create secret for service binding (Experimental)
+## Ref: https://servicebinding.io/service-provider/
+##
+serviceBindings:
+  enabled: false
+
+## Service account for PostgreSQL to use.
+## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
+##
+serviceAccount:
+  ## @param serviceAccount.create Enable creation of ServiceAccount for PostgreSQL pod
+  ##
+  create: false
+  ## @param serviceAccount.name The name of the ServiceAccount to use.
+  ## If not set and create is true, a name is generated using the common.names.fullname template
+  ##
+  name: ""
+  ## @param serviceAccount.automountServiceAccountToken Allows auto mount of ServiceAccountToken on the serviceAccount created
+  ## Can be set to false if pods using this serviceAccount do not need to use K8s API
+  ##
+  automountServiceAccountToken: true
+  ## @param serviceAccount.annotations Additional custom annotations for the ServiceAccount
+  ##
+  annotations: {}
+## Creates role for ServiceAccount
+## @param rbac.create Create Role and RoleBinding (required for PSP to work)
+##
+rbac:
+  create: false
+  ## @param rbac.rules Custom RBAC rules to set
+  ## e.g:
+  ## rules:
+  ##   - apiGroups:
+  ##       - ""
+  ##     resources:
+  ##       - pods
+  ##     verbs:
+  ##       - get
+  ##       - list
+  ##
+  rules: []
+## Pod Security Policy
+## ref: https://kubernetes.io/docs/concepts/policy/pod-security-policy/
+## @param psp.create Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later
+##
+psp:
+  create: false
+
+## @section Metrics Parameters
+##
+
+metrics:
+  ## @param metrics.enabled Start a prometheus exporter
+  ##
+  enabled: false
+  ## @param metrics.image.registry PostgreSQL Prometheus Exporter image registry
+  ## @param metrics.image.repository PostgreSQL Prometheus Exporter image repository
+  ## @param metrics.image.tag PostgreSQL Prometheus Exporter image tag (immutable tags are recommended)
+  ## @param metrics.image.digest PostgreSQL image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
+  ## @param metrics.image.pullPolicy PostgreSQL Prometheus Exporter image pull policy
+  ## @param metrics.image.pullSecrets Specify image pull secrets
+  ##
+  image:
+    registry: docker.io
+    repository: bitnami/postgres-exporter
+    tag: 0.12.0-debian-11-r91
+    digest: ""
+    pullPolicy: IfNotPresent
+    ## Optionally specify an array of imagePullSecrets.
+    ## Secrets must be manually created in the namespace.
+    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
+    ## Example:
+    ## pullSecrets:
+    ##   - myRegistryKeySecretName
+    ##
+    pullSecrets: []
+  ## @param metrics.customMetrics Define additional custom metrics
+  ## ref: https://github.com/wrouesnel/postgres_exporter#adding-new-metrics-via-a-config-file
+  ## customMetrics:
+  ##   pg_database:
+  ##     query: "SELECT d.datname AS name, CASE WHEN pg_catalog.has_database_privilege(d.datname, 'CONNECT') THEN pg_catalog.pg_database_size(d.datname) ELSE 0 END AS size_bytes FROM pg_catalog.pg_database d where datname not in ('template0', 'template1', 'postgres')"
+  ##     metrics:
+  ##       - name:
+  ##           usage: "LABEL"
+  ##           description: "Name of the database"
+  ##       - size_bytes:
+  ##           usage: "GAUGE"
+  ##           description: "Size of the database in bytes"
+  ##
+  customMetrics: {}
+  ## @param metrics.extraEnvVars Extra environment variables to add to PostgreSQL Prometheus exporter
+  ## see: https://github.com/wrouesnel/postgres_exporter#environment-variables
+  ## For example:
+  ##  extraEnvVars:
+  ##  - name: PG_EXPORTER_DISABLE_DEFAULT_METRICS
+  ##    value: "true"
+  ##
+  extraEnvVars: []
+  ## PostgreSQL Prometheus exporter containers' Security Context
+  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
+  ## @param metrics.containerSecurityContext.enabled Enable PostgreSQL Prometheus exporter containers' Security Context
+  ## @param metrics.containerSecurityContext.runAsUser Set PostgreSQL Prometheus exporter containers' Security Context runAsUser
+  ## @param metrics.containerSecurityContext.runAsNonRoot Set PostgreSQL Prometheus exporter containers' Security Context runAsNonRoot
+  ##
+  containerSecurityContext:
+    enabled: true
+    runAsUser: 1001
+    runAsNonRoot: true
+  ## Configure extra options for PostgreSQL Prometheus exporter containers' liveness, readiness and startup probes
+  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes
+  ## @param metrics.livenessProbe.enabled Enable livenessProbe on PostgreSQL Prometheus exporter containers
+  ## @param metrics.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
+  ## @param metrics.livenessProbe.periodSeconds Period seconds for livenessProbe
+  ## @param metrics.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
+  ## @param metrics.livenessProbe.failureThreshold Failure threshold for livenessProbe
+  ## @param metrics.livenessProbe.successThreshold Success threshold for livenessProbe
+  ##
+  livenessProbe:
+    enabled: true
+    initialDelaySeconds: 5
+    periodSeconds: 10
+    timeoutSeconds: 5
+    failureThreshold: 6
+    successThreshold: 1
+  ## @param metrics.readinessProbe.enabled Enable readinessProbe on PostgreSQL Prometheus exporter containers
+  ## @param metrics.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
+  ## @param metrics.readinessProbe.periodSeconds Period seconds for readinessProbe
+  ## @param metrics.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
+  ## @param metrics.readinessProbe.failureThreshold Failure threshold for readinessProbe
+  ## @param metrics.readinessProbe.successThreshold Success threshold for readinessProbe
+  ##
+  readinessProbe:
+    enabled: true
+    initialDelaySeconds: 5
+    periodSeconds: 10
+    timeoutSeconds: 5
+    failureThreshold: 6
+    successThreshold: 1
+  ## @param metrics.startupProbe.enabled Enable startupProbe on PostgreSQL Prometheus exporter containers
+  ## @param metrics.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
+  ## @param metrics.startupProbe.periodSeconds Period seconds for startupProbe
+  ## @param metrics.startupProbe.timeoutSeconds Timeout seconds for startupProbe
+  ## @param metrics.startupProbe.failureThreshold Failure threshold for startupProbe
+  ## @param metrics.startupProbe.successThreshold Success threshold for startupProbe
+  ##
+  startupProbe:
+    enabled: false
+    initialDelaySeconds: 10
+    periodSeconds: 10
+    timeoutSeconds: 1
+    failureThreshold: 15
+    successThreshold: 1
+  ## @param metrics.customLivenessProbe Custom livenessProbe that overrides the default one
+  ##
+  customLivenessProbe: {}
+  ## @param metrics.customReadinessProbe Custom readinessProbe that overrides the default one
+  ##
+  customReadinessProbe: {}
+  ## @param metrics.customStartupProbe Custom startupProbe that overrides the default one
+  ##
+  customStartupProbe: {}
+  ## @param metrics.containerPorts.metrics PostgreSQL Prometheus exporter metrics container port
+  ##
+  containerPorts:
+    metrics: 9187
+  ## PostgreSQL Prometheus exporter resource requests and limits
+  ## ref: https://kubernetes.io/docs/user-guide/compute-resources/
+  ## @param metrics.resources.limits The resources limits for the PostgreSQL Prometheus exporter container
+  ## @param metrics.resources.requests The requested resources for the PostgreSQL Prometheus exporter container
+  ##
+  resources:
+    limits: {}
+    requests: {}
+  ## Service configuration
+  ##
+  service:
+    ## @param metrics.service.ports.metrics PostgreSQL Prometheus Exporter service port
+    ##
+    ports:
+      metrics: 9187
+    ## @param metrics.service.clusterIP Static clusterIP or None for headless services
+    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#choosing-your-own-ip-address
+    ##
+    clusterIP: ""
+    ## @param metrics.service.sessionAffinity Control where client requests go, to the same pod or round-robin
+    ## Values: ClientIP or None
+    ## ref: https://kubernetes.io/docs/user-guide/services/
+    ##
+    sessionAffinity: None
+    ## @param metrics.service.annotations [object] Annotations for Prometheus to auto-discover the metrics endpoint
+    ##
+    annotations:
+      prometheus.io/scrape: "true"
+      prometheus.io/port: "{{ .Values.metrics.service.ports.metrics }}"
+  ## Prometheus Operator ServiceMonitor configuration
+  ##
+  serviceMonitor:
+    ## @param metrics.serviceMonitor.enabled Create ServiceMonitor Resource for scraping metrics using Prometheus Operator
+    ##
+    enabled: false
+    ## @param metrics.serviceMonitor.namespace Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)
+    ##
+    namespace: ""
+    ## @param metrics.serviceMonitor.interval Interval at which metrics should be scraped.
+    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
+    ##
+    interval: ""
+    ## @param metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
+    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
+    ##
+    scrapeTimeout: ""
+    ## @param metrics.serviceMonitor.labels Additional labels that can be used so ServiceMonitor will be discovered by Prometheus
+    ##
+    labels: {}
+    ## @param metrics.serviceMonitor.selector Prometheus instance selector labels
+    ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
+    ##
+    selector: {}
+    ## @param metrics.serviceMonitor.relabelings RelabelConfigs to apply to samples before scraping
+    ##
+    relabelings: []
+    ## @param metrics.serviceMonitor.metricRelabelings MetricRelabelConfigs to apply to samples before ingestion
+    ##
+    metricRelabelings: []
+    ## @param metrics.serviceMonitor.honorLabels Specify honorLabels parameter to add the scrape endpoint
+    ##
+    honorLabels: false
+    ## @param metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in prometheus.
+    ##
+    jobLabel: ""
+  ## Custom PrometheusRule to be defined
+  ## The value is evaluated as a template, so, for example, the value can depend on .Release or .Chart
+  ## ref: https://github.com/coreos/prometheus-operator#customresourcedefinitions
+  ##
+  prometheusRule:
+    ## @param metrics.prometheusRule.enabled Create a PrometheusRule for Prometheus Operator
+    ##
+    enabled: false
+    ## @param metrics.prometheusRule.namespace Namespace for the PrometheusRule Resource (defaults to the Release Namespace)
+    ##
+    namespace: ""
+    ## @param metrics.prometheusRule.labels Additional labels that can be used so PrometheusRule will be discovered by Prometheus
+    ##
+    labels: {}
+    ## @param metrics.prometheusRule.rules PrometheusRule definitions
+    ## Make sure to constraint the rules to the current postgresql service.
+    ## rules:
+    ##   - alert: HugeReplicationLag
+    ##     expr: pg_replication_lag{service="{{ printf "%s-metrics" (include "common.names.fullname" .) }}"} / 3600 > 1
+    ##     for: 1m
+    ##     labels:
+    ##       severity: critical
+    ##     annotations:
+    ##       description: replication for {{ include "common.names.fullname" . }} PostgreSQL is lagging by {{ "{{ $value }}" }} hour(s).
+    ##       summary: PostgreSQL replication is lagging by {{ "{{ $value }}" }} hour(s).
+    ##
+    rules: []