diff --git a/charts/mongodb/templates/NOTES.txt b/charts/mongodb/templates/NOTES.txt
new file mode 100644
index 0000000..a69eb9c
--- /dev/null
+++ b/charts/mongodb/templates/NOTES.txt
@@ -0,0 +1,171 @@
+CHART NAME: {{ .Chart.Name }}
+CHART VERSION: {{ .Chart.Version }}
+APP VERSION: {{ .Chart.AppVersion }}
+
+{{- if .Values.diagnosticMode.enabled }}
+The chart has been deployed in diagnostic mode. All probes have been disabled and the command has been overwritten with:
+
+  command: {{- include "common.tplvalues.render" (dict "value" .Values.diagnosticMode.command "context" $) | nindent 4 }}
+  args: {{- include "common.tplvalues.render" (dict "value" .Values.diagnosticMode.args "context" $) | nindent 4 }}
+
+Get the list of pods by executing:
+
+  kubectl get pods --namespace {{ .Release.Namespace }} -l app.kubernetes.io/instance={{ .Release.Name }}
+
+Access the pod you want to debug by executing
+
+  kubectl exec --namespace {{ .Release.Namespace }} -ti <NAME OF THE POD> -- bash
+
+In order to replicate the container startup scripts execute this command:
+
+    /opt/bitnami/scripts/mongodb/entrypoint.sh /opt/bitnami/scripts/mongodb/run.sh
+
+{{- else }}
+
+{{- $replicaCount := int .Values.replicaCount }}
+{{- $portNumber := int .Values.service.ports.mongodb }}
+{{- $fullname := include "mongodb.fullname" . }}
+{{- $releaseNamespace := include "mongodb.namespace" . }}
+{{- $clusterDomain := .Values.clusterDomain }}
+{{- $loadBalancerIPListLength := len .Values.externalAccess.service.loadBalancerIPs }}
+{{- $mongoList := list }}
+{{- range $e, $i := until $replicaCount }}
+{{- $mongoList = append $mongoList (printf "%s-%d.%s-headless.%s.svc.%s:%d" $fullname $i $fullname $releaseNamespace $clusterDomain $portNumber) }}
+{{- end }}
+
+{{- if and (or (and (eq .Values.architecture "standalone") (or (eq .Values.service.type "LoadBalancer") (eq .Values.service.type "NodePort"))) (and (eq .Values.architecture "replicaset") .Values.externalAccess.enabled)) (not .Values.auth.enabled) }}
+-------------------------------------------------------------------------------
+ WARNING
+
+    By not enabling "mongodb.auth.enabled" you have most likely exposed the
+    MongoDB&reg; service externally without any authentication mechanism.
+
+    For security reasons, we strongly suggest that you enable authentication
+    setting the "mongodb.auth.enabled" parameter to "true".
+
+-------------------------------------------------------------------------------
+{{- end }}
+
+** Please be patient while the chart is being deployed **
+
+MongoDB&reg; can be accessed on the following DNS name(s) and ports from within your cluster:
+
+{{- if eq .Values.architecture "replicaset" }}
+{{ join "\n" $mongoList | nindent 4 }}
+{{- else }}
+
+    {{ $fullname }}.{{ $releaseNamespace }}.svc.{{ .Values.clusterDomain }}
+
+{{- end }}
+
+{{- if .Values.auth.enabled }}
+
+To get the root password run:
+
+    export MONGODB_ROOT_PASSWORD=$(kubectl get secret --namespace {{ template "mongodb.namespace" . }} {{ template "mongodb.secretName" . }} -o jsonpath="{.data.mongodb-root-password}" | base64 -d)
+
+{{- end }}
+{{- $customUsers := include "mongodb.customUsers" . -}}
+{{- $customDatabases := include "mongodb.customDatabases" . -}}
+{{- if and (not (empty $customUsers)) (not (empty $customDatabases)) }}
+{{- $customUsersList := splitList "," $customUsers }}
+{{- range $index, $user := $customUsersList }}
+
+To get the password for "{{ $user }}" run:
+
+    export MONGODB_PASSWORD=$(kubectl get secret --namespace {{ include "mongodb.namespace" $ }} {{ include "mongodb.secretName" $ }} -o jsonpath="{.data.mongodb-passwords}" | base64 -d | awk -F',' '{print ${{ add 1 $index }}}')
+
+{{- end }}
+{{- end }}
+
+To connect to your database, create a MongoDB&reg; client container:
+
+    kubectl run --namespace {{ template "mongodb.namespace" . }} {{ template "mongodb.fullname" . }}-client --rm --tty -i --restart='Never' --env="MONGODB_ROOT_PASSWORD=$MONGODB_ROOT_PASSWORD" --image {{ template "mongodb.image" . }} --command -- bash
+
+Then, run the following command:
+
+    {{- if eq .Values.architecture "replicaset" }}
+    mongosh admin --host "{{ join "," $mongoList }}" {{- if .Values.auth.enabled }} --authenticationDatabase admin -u $MONGODB_ROOT_USER -p $MONGODB_ROOT_PASSWORD{{- end }}
+    {{- else }}
+    mongosh admin --host "{{ template "mongodb.service.nameOverride" . }}" {{- if .Values.auth.enabled }} --authenticationDatabase admin -u $MONGODB_ROOT_USER -p $MONGODB_ROOT_PASSWORD{{- end }}
+    {{- end }}
+
+{{- if and (eq .Values.architecture "replicaset") .Values.externalAccess.enabled }}
+
+To connect to your database nodes from outside, you need to add both primary and secondary nodes hostnames/IPs to your Mongo client. To obtain them, follow the instructions below:
+
+{{- if eq "NodePort" .Values.externalAccess.service.type }}
+{{- if .Values.externalAccess.service.domain }}
+
+    MongoDB&reg; nodes domain: Use your provided hostname to reach MongoDB&reg; nodes, {{ .Values.externalAccess.service.domain }}
+
+{{- else }}
+
+    MongoDB&reg; nodes domain: you can reach MongoDB&reg; nodes on any of the K8s nodes external IPs.
+
+        kubectl get nodes -o wide
+
+{{- end }}
+
+    MongoDB&reg; nodes port: You will have a different node port for each MongoDB&reg; node. You can get the list of configured node ports using the command below:
+
+        echo "$(kubectl get svc --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ template "mongodb.name" . }},app.kubernetes.io/instance={{ .Release.Name }},app.kubernetes.io/component=mongodb,pod" -o jsonpath='{.items[*].spec.ports[0].nodePort}' | tr ' ' '\n')"
+
+{{- else if contains "LoadBalancer" .Values.externalAccess.service.type }}
+
+  NOTE: It may take a few minutes for the LoadBalancer IPs to be available.
+        Watch the status with: 'kubectl get svc --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ template "mongodb.name" . }},app.kubernetes.io/instance={{ .Release.Name }},app.kubernetes.io/component=mongodb,pod" -w'
+
+    MongoDB&reg; nodes domain: You will have a different external IP for each MongoDB&reg; node. You can get the list of external IPs using the command below:
+
+        echo "$(kubectl get svc --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ template "mongodb.name" . }},app.kubernetes.io/instance={{ .Release.Name }},app.kubernetes.io/component=mongodb,pod" -o jsonpath='{.items[*].status.loadBalancer.ingress[0].ip}' | tr ' ' '\n')"
+
+    MongoDB&reg; nodes port: {{ .Values.externalAccess.service.ports.mongodb }}
+
+{{- end }}
+
+{{- else if eq .Values.architecture "standalone" }}
+
+To connect to your database from outside the cluster execute the following commands:
+
+{{- if contains "NodePort" .Values.service.type }}
+
+    export NODE_IP=$(kubectl get nodes --namespace {{ template "mongodb.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+    export NODE_PORT=$(kubectl get --namespace {{ template "mongodb.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ template "mongodb.service.nameOverride" . }})
+    mongo --host $NODE_IP --port $NODE_PORT {{- if .Values.auth.enabled }} --authenticationDatabase admin -p $MONGODB_ROOT_PASSWORD{{- end }}
+
+{{- else if contains "LoadBalancer" .Values.service.type }}
+
+  NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+        Watch the status with: 'kubectl get svc --namespace {{ template "mongodb.namespace" . }} -w {{ template "mongodb.service.nameOverride" . }}'
+
+    export SERVICE_IP=$(kubectl get svc --namespace {{ template "mongodb.namespace" . }} {{ template "mongodb.service.nameOverride" . }} --template "{{ "{{ range (index .status.loadBalancer.ingress 0) }}{{ . }}{{ end }}" }}")
+    mongosh --host $SERVICE_IP --port {{ $portNumber }} {{- if .Values.auth.enabled }} --authenticationDatabase admin -p $MONGODB_ROOT_PASSWORD{{- end }}
+
+{{- else if contains "ClusterIP" .Values.service.type }}
+
+    kubectl port-forward --namespace {{ template "mongodb.namespace" . }} svc/{{ template "mongodb.service.nameOverride" . }} {{ $portNumber }}:{{ $portNumber }} &
+    mongosh --host 127.0.0.1 {{- if .Values.auth.enabled }} --authenticationDatabase admin -p $MONGODB_ROOT_PASSWORD{{- end }}
+
+{{- end }}
+{{- end }}
+
+{{- if .Values.metrics.enabled }}
+
+To access the MongoDB&reg; Prometheus metrics, get the MongoDB&reg; Prometheus URL by running:
+
+    kubectl port-forward --namespace {{ .Release.Namespace }} svc/{{ printf "%s-metrics" (include "mongodb.fullname" .) }} {{ .Values.metrics.service.ports.metrics }}:{{ .Values.metrics.service.ports.metrics }} &
+    echo "Prometheus Metrics URL: http://127.0.0.1:{{ .Values.metrics.service.ports.metrics }}/metrics"
+
+Then, open the obtained URL in a browser.
+
+{{- end }}
+{{- end }}
+{{- include "common.warnings.rollingTag" .Values.image }}
+{{- include "common.warnings.rollingTag" .Values.metrics.image }}
+{{- include "common.warnings.rollingTag" .Values.externalAccess.autoDiscovery.image }}
+{{- include "common.warnings.rollingTag" .Values.volumePermissions.image }}
+{{- include "common.warnings.rollingTag" .Values.tls.image }}
+{{- include "mongodb.validateValues" . }}
+{{- include "common.warnings.resources" (dict "sections" (list "arbiter" "externalAccess.autoDiscovery" "hidden" "metrics" "" "tls" "volumePermissions") "context" $) }}
+{{- include "common.warnings.modifiedImages" (dict "images" (list .Values.image .Values.tls.image .Values.externalAccess.autoDiscovery.image .Values.externalAccess.dnsCheck.image .Values.volumePermissions.image .Values.metrics.image) "context" $) }}
\ No newline at end of file