diff --git a/charts/headscale/templates/config.yaml b/charts/headscale/templates/config.yaml
new file mode 100644
index 0000000..88ca0de
--- /dev/null
+++ b/charts/headscale/templates/config.yaml
@@ -0,0 +1,309 @@
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: config
+  namespace: {{ .Release.Namespace }}
+data:
+  config.yaml: |
+    # headscale will look for a configuration file named `config.yaml` (or `config.json`) in the following order:
+    #
+    # - `/etc/headscale`
+    # - `~/.headscale`
+    # - current working directory
+
+    # The url clients will connect to.
+    # Typically this will be a domain like:
+    #
+    # https://myheadscale.example.com:443
+    #
+    server_url: https://headscale.{{ .Values.domain }}
+
+    # Address to listen to / bind to on the server
+    #
+    # For production:
+    listen_addr: 0.0.0.0:8080
+    # listen_addr: 127.0.0.1:8080
+
+    # Address to listen to /metrics, you may want
+    # to keep this endpoint private to your internal
+    # network
+    #
+    metrics_listen_addr: 0.0.0.0:9090
+    # metrics_listen_addr: 127.0.0.1:9090
+
+    # Address to listen for gRPC.
+    # gRPC is used for controlling a headscale server
+    # remotely with the CLI
+    # Note: Remote access _only_ works if you have
+    # valid certificates.
+    #
+    # For production:
+    grpc_listen_addr: 0.0.0.0:50443
+    # grpc_listen_addr: 127.0.0.1:50443
+
+    # Allow the gRPC admin interface to run in INSECURE
+    # mode. This is not recommended as the traffic will
+    # be unencrypted. Only enable if you know what you
+    # are doing.
+    grpc_allow_insecure: false
+
+    # Private key used to encrypt the traffic between headscale
+    # and Tailscale clients.
+    # The private key file will be autogenerated if it's missing.
+    #
+    # For production:
+    # /var/lib/headscale/private.key
+    private_key_path: /headscale/data/private.key
+
+    # The Noise section includes specific configuration for the
+    # TS2021 Noise protocol
+    noise:
+      # The Noise private key is used to encrypt the
+      # traffic between headscale and Tailscale clients when
+      # using the new Noise-based protocol. It must be different
+      # from the legacy private key.
+      #
+      # For production:
+      # private_key_path: /var/lib/headscale/noise_private.key
+      private_key_path: /headscale/data/noise_private.key
+
+    # List of IP prefixes to allocate tailaddresses from.
+    # Each prefix consists of either an IPv4 or IPv6 address,
+    # and the associated prefix length, delimited by a slash.
+    ip_prefixes:
+      # - fd7a:115c:a1e0::/48
+      - 100.64.0.0/10
+
+    # DERP is a relay system that Tailscale uses when a direct
+    # connection cannot be established.
+    # https://tailscale.com/blog/how-tailscale-works/#encrypted-tcp-relays-derp
+    #
+    # headscale needs a list of DERP servers that can be presented
+    # to the clients.
+    derp:
+      server:
+        # If enabled, runs the embedded DERP server and merges it into the rest of the DERP config
+        # The Headscale server_url defined above MUST be using https, DERP requires TLS to be in place
+        enabled: false
+
+        # Region ID to use for the embedded DERP server.
+        # The local DERP prevails if the region ID collides with other region ID coming from
+        # the regular DERP config.
+        region_id: 999
+
+        # Region code and name are displayed in the Tailscale UI to identify a DERP region
+        region_code: "headscale"
+        region_name: "Headscale Embedded DERP"
+
+        # Listens over UDP at the configured address for STUN connections - to help with NAT traversal.
+        # When the embedded DERP server is enabled stun_listen_addr MUST be defined.
+        #
+        # For more details on how this works, check this great article: https://tailscale.com/blog/how-tailscale-works/
+        stun_listen_addr: "0.0.0.0:3478"
+
+      # List of externally available DERP maps encoded in JSON
+      urls:
+        - https://controlplane.tailscale.com/derpmap/default
+
+      # Locally available DERP map files encoded in YAML
+      #
+      # This option is mostly interesting for people hosting
+      # their own DERP servers:
+      # https://tailscale.com/kb/1118/custom-derp-servers/
+      #
+      # paths:
+      #   - /etc/headscale/derp-example.yaml
+      paths: []
+
+      # If enabled, a worker will be set up to periodically
+      # refresh the given sources and update the derpmap
+      # will be set up.
+      auto_update_enabled: true
+
+      # How often should we check for DERP updates?
+      update_frequency: 24h
+
+    # Disables the automatic check for headscale updates on startup
+    disable_check_updates: true
+
+    # Time before an inactive ephemeral node is deleted?
+    ephemeral_node_inactivity_timeout: 30m
+
+    # Period to check for node updates within the tailnet. A value too low will severely affect
+    # CPU consumption of Headscale. A value too high (over 60s) will cause problems
+    # for the nodes, as they won't get updates or keep alive messages frequently enough.
+    # In case of doubts, do not touch the default 10s.
+    node_update_check_interval: 10s
+
+    # SQLite config
+    db_type: sqlite3
+
+    # For production:
+    # db_path: /var/lib/headscale/db.sqlite
+    db_path: /headscale/data/db.sqlite
+
+    # # Postgres config
+    # If using a Unix socket to connect to Postgres, set the socket path in the 'host' field and leave 'port' blank.
+    # db_type: postgres
+    # db_host: localhost
+    # db_port: 5432
+    # db_name: headscale
+    # db_user: foo
+    # db_pass: bar
+
+    # If other 'sslmode' is required instead of 'require(true)' and 'disabled(false)', set the 'sslmode' you need
+    # in the 'db_ssl' field. Refers to https://www.postgresql.org/docs/current/libpq-ssl.html Table 34.1.
+    # db_ssl: false
+
+    ### TLS configuration
+    #
+    ## Let's encrypt / ACME
+    #
+    # headscale supports automatically requesting and setting up
+    # TLS for a domain with Let's Encrypt.
+    #
+    # URL to ACME directory
+    acme_url: https://acme-v02.api.letsencrypt.org/directory
+
+    # Email to register with ACME provider
+    acme_email: ""
+
+    # Domain name to request a TLS certificate for:
+    tls_letsencrypt_hostname: ""
+
+    # Path to store certificates and metadata needed by
+    # letsencrypt
+    # For production:
+    # tls_letsencrypt_cache_dir: /var/lib/headscale/cache
+    tls_letsencrypt_cache_dir: ./cache
+
+    # Type of ACME challenge to use, currently supported types:
+    # HTTP-01 or TLS-ALPN-01
+    # See [docs/tls.md](docs/tls.md) for more information
+    tls_letsencrypt_challenge_type: HTTP-01
+    # When HTTP-01 challenge is chosen, letsencrypt must set up a
+    # verification endpoint, and it will be listening on:
+    # :http = port 80
+    tls_letsencrypt_listen: ":http"
+
+    ## Use already defined certificates:
+    tls_cert_path: ""
+    tls_key_path: ""
+
+    log:
+      # Output formatting for logs: text or json
+      format: text
+      level: info
+
+    # Path to a file containg ACL policies.
+    # ACLs can be defined as YAML or HUJSON.
+    # https://tailscale.com/kb/1018/acls/
+    acl_policy_path: ""
+
+    ## DNS
+    #
+    # headscale supports Tailscale's DNS configuration and MagicDNS.
+    # Please have a look to their KB to better understand the concepts:
+    #
+    # - https://tailscale.com/kb/1054/dns/
+    # - https://tailscale.com/kb/1081/magicdns/
+    # - https://tailscale.com/blog/2021-09-private-dns-with-magicdns/
+    #
+    dns_config:
+      # Whether to prefer using Headscale provided DNS or use local.
+      override_local_dns: true
+
+      # List of DNS servers to expose to clients.
+      nameservers:
+        - 8.8.8.8
+        - 1.1.1.1
+
+      # NextDNS (see https://tailscale.com/kb/1218/nextdns/).
+      # "abc123" is example NextDNS ID, replace with yours.
+      #
+      # With metadata sharing:
+      # nameservers:
+      #   - https://dns.nextdns.io/abc123
+      #
+      # Without metadata sharing:
+      # nameservers:
+      #   - 2a07:a8c0::ab:c123
+      #   - 2a07:a8c1::ab:c123
+
+      # Split DNS (see https://tailscale.com/kb/1054/dns/),
+      # list of search domains and the DNS to query for each one.
+      #
+      # restricted_nameservers:
+      #   foo.bar.com:
+      #     - 1.1.1.1
+      #   darp.headscale.net:
+      #     - 1.1.1.1
+      #     - 8.8.8.8
+
+      # Search domains to inject.
+      domains: []
+
+      # Whether to use [MagicDNS](https://tailscale.com/kb/1081/magicdns/).
+      # Only works if there is at least a nameserver defined.
+      magic_dns: true
+
+      # Defines the base domain to create the hostnames for MagicDNS.
+      # `base_domain` must be a FQDNs, without the trailing dot.
+      # The FQDN of the hosts will be
+      # `hostname.namespace.base_domain` (e.g., _myhost.mynamespace.example.com_).
+      base_domain: example.com
+
+    # Unix socket used for the CLI to connect without authentication
+    # Note: for production you will want to set this to something like:
+    # unix_socket: /var/run/headscale.sock
+    unix_socket: ./headscale.sock
+    unix_socket_permission: "0770"
+    #
+    # headscale supports experimental OpenID connect support,
+    # it is still being tested and might have some bugs, please
+    # help us test it.
+    # OpenID Connect
+    # oidc:
+    #   only_start_if_oidc_is_available: true
+    #   issuer: "https://your-oidc.issuer.com/path"
+    #   client_id: "your-oidc-client-id"
+    #   client_secret: "your-oidc-client-secret"
+    #
+    #   Customize the scopes used in the OIDC flow, defaults to "openid", "profile" and "email" and add custom query
+    #   parameters to the Authorize Endpoint request. Scopes default to "openid", "profile" and "email".
+    #
+    #   scope: ["openid", "profile", "email", "custom"]
+    #   extra_params:
+    #     domain_hint: example.com
+    #
+    #   List allowed principal domains and/or users. If an authenticated user's domain is not in this list, the
+    #   authentication request will be rejected.
+    #
+    #   allowed_domains:
+    #     - example.com
+    # Groups from keycloak have a leading '/'
+    #   allowed_groups:
+    #     - /headscale
+    #   allowed_users:
+    #     - alice@example.com
+    #
+    #   If `strip_email_domain` is set to `true`, the domain part of the username email address will be removed.
+    #   This will transform `first-name.last-name@example.com` to the namespace `first-name.last-name`
+    #   If `strip_email_domain` is set to `false` the domain part will NOT be removed resulting to the following
+    #   namespace: `first-name.last-name.example.com`
+    #
+    #   strip_email_domain: true
+
+    # Logtail configuration
+    # Logtail is Tailscales logging and auditing infrastructure, it allows the control panel
+    # to instruct tailscale nodes to log their activity to a remote server.
+    logtail:
+      # Enable logtail for this headscales clients.
+      # As there is currently no support for overriding the log server in headscale, this is
+      # disabled by default. Enabling this will make your clients send logs to Tailscale Inc.
+      enabled: false
+
+    # Enabling this option makes devices prefer a random port for WireGuard traffic over the
+    # default static port 41641. This option is intended as a workaround for some buggy
+    # firewall devices. See https://tailscale.com/kb/1181/firewalls/ for more information.
+    randomize_client_port: true
diff --git a/charts/headscale/templates/headscale.yaml b/charts/headscale/templates/headscale.yaml
new file mode 100644
index 0000000..479c3ea
--- /dev/null
+++ b/charts/headscale/templates/headscale.yaml
@@ -0,0 +1,116 @@
+apiVersion: cert-manager.io/v1
+kind: Certificate
+metadata:
+  name: headscale.{{ .Values.domain }}
+  namespace: {{ .Release.Namespace }}
+  annotations:
+    helm.sh/resource-policy: keep
+spec:
+  dnsNames:
+  - 'headscale.{{ .Values.domain }}'
+  issuerRef:
+    name: {{ .Values.certificateIssuer }}
+    kind: ClusterIssuer
+  secretName: cert-headscale.{{ .Values.domain }}
+---
+apiVersion: networking.k8s.io/v1
+kind: Ingress
+metadata:
+  name: ingress
+  namespace: {{ .Release.Namespace }}
+spec:
+  ingressClassName: {{ .Values.ingressClassName }}
+  tls:
+  - hosts:
+    - headscale.{{ .Values.domain }}
+    secretName: cert-headscale.{{ .Values.domain }}
+  rules:
+  - host: headscale.{{ .Values.domain }}
+    http:
+      paths:
+      - path: /
+        pathType: Prefix
+        backend:
+          service:
+            name: headscale
+            port:
+              name: http
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: headscale
+  namespace: {{ .Release.Namespace }}
+spec:
+  type: LoadBalancer
+  selector:
+    app: headscale
+  ports:
+  - name: http
+    port: 80
+    targetPort: http
+    protocol: TCP
+---
+apiVersion: v1
+kind: PersistentVolumeClaim
+metadata:
+  name: data
+  namespace: {{ .Release.Namespace }}
+spec:
+  accessModes:
+    - ReadWriteOnce
+  resources:
+    requests:
+      storage: {{ .Values.storage.size }}
+---
+apiVersion: apps/v1
+kind: StatefulSet
+metadata:
+  name: headscale
+  namespace: {{ .Release.Namespace }}
+spec:
+  selector:
+    matchLabels:
+      app: headscale
+  serviceName: headscale
+  replicas: 1
+  template:
+    metadata:
+      labels:
+        app: headscale
+    spec:
+      volumes:
+      - name: data
+        persistentVolumeClaim:
+          claimName: data
+      - name: config
+        configMap:
+          name: config
+      containers:
+      - name: headscale
+        image: {{ .Values.image.repository }}:{{ .Values.image.tag }}
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        ports:
+        - name: http
+          containerPort: 8080
+          protocol: TCP
+        command: ["headscale", "--config=/headscale/config/config.yaml", "serve"]
+        resources:
+      #     requests:
+      #       memory: "10Mi"
+      #       cpu: "10m"
+      #     limits:
+      #       memory: "20Mi"
+      #       cpu: "100m"
+      # tolerations:
+      # - key: "pcloud"
+      #   operator: "Equal"
+      #   value: "role"
+      #   effect: "NoSchedule"
+        volumeMounts:
+        - name: data
+          mountPath: /headscale/data
+          readOnly: false
+        - name: config
+          mountPath: /headscale/config
+          readOnly: true