Upgrade: Longhorn from 1.5.2 to 1.6.4
Change-Id: I8cdc3c0a07133f00442b496800ccc30e2c1dad61
diff --git a/charts/longhorn/templates/default-setting.yaml b/charts/longhorn/templates/default-setting.yaml
index ac38ba9..5261f7f 100644
--- a/charts/longhorn/templates/default-setting.yaml
+++ b/charts/longhorn/templates/default-setting.yaml
@@ -6,26 +6,69 @@
labels: {{- include "longhorn.labels" . | nindent 4 }}
data:
default-setting.yaml: |-
- {{ if not (kindIs "invalid" .Values.defaultSettings.backupTarget) }}backup-target: {{ .Values.defaultSettings.backupTarget }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.backupTargetCredentialSecret) }}backup-target-credential-secret: {{ .Values.defaultSettings.backupTargetCredentialSecret }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.allowRecurringJobWhileVolumeDetached) }}allow-recurring-job-while-volume-detached: {{ .Values.defaultSettings.allowRecurringJobWhileVolumeDetached }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.createDefaultDiskLabeledNodes) }}create-default-disk-labeled-nodes: {{ .Values.defaultSettings.createDefaultDiskLabeledNodes }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.defaultDataPath) }}default-data-path: {{ .Values.defaultSettings.defaultDataPath }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.replicaSoftAntiAffinity) }}replica-soft-anti-affinity: {{ .Values.defaultSettings.replicaSoftAntiAffinity }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.replicaAutoBalance) }}replica-auto-balance: {{ .Values.defaultSettings.replicaAutoBalance }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.storageOverProvisioningPercentage) }}storage-over-provisioning-percentage: {{ .Values.defaultSettings.storageOverProvisioningPercentage }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.storageMinimalAvailablePercentage) }}storage-minimal-available-percentage: {{ .Values.defaultSettings.storageMinimalAvailablePercentage }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.storageReservedPercentageForDefaultDisk) }}storage-reserved-percentage-for-default-disk: {{ .Values.defaultSettings.storageReservedPercentageForDefaultDisk }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.upgradeChecker) }}upgrade-checker: {{ .Values.defaultSettings.upgradeChecker }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.defaultReplicaCount) }}default-replica-count: {{ .Values.defaultSettings.defaultReplicaCount }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.defaultDataLocality) }}default-data-locality: {{ .Values.defaultSettings.defaultDataLocality }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.defaultLonghornStaticStorageClass) }}default-longhorn-static-storage-class: {{ .Values.defaultSettings.defaultLonghornStaticStorageClass }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.backupstorePollInterval) }}backupstore-poll-interval: {{ .Values.defaultSettings.backupstorePollInterval }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.failedBackupTTL) }}failed-backup-ttl: {{ .Values.defaultSettings.failedBackupTTL }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.restoreVolumeRecurringJobs) }}restore-volume-recurring-jobs: {{ .Values.defaultSettings.restoreVolumeRecurringJobs }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.recurringSuccessfulJobsHistoryLimit) }}recurring-successful-jobs-history-limit: {{ .Values.defaultSettings.recurringSuccessfulJobsHistoryLimit }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.recurringFailedJobsHistoryLimit) }}recurring-failed-jobs-history-limit: {{ .Values.defaultSettings.recurringFailedJobsHistoryLimit }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.supportBundleFailedHistoryLimit) }}support-bundle-failed-history-limit: {{ .Values.defaultSettings.supportBundleFailedHistoryLimit }}{{ end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.backupTarget) }}
+ backup-target: {{ .Values.defaultSettings.backupTarget }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.backupTargetCredentialSecret) }}
+ backup-target-credential-secret: {{ .Values.defaultSettings.backupTargetCredentialSecret }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.allowRecurringJobWhileVolumeDetached) }}
+ allow-recurring-job-while-volume-detached: {{ .Values.defaultSettings.allowRecurringJobWhileVolumeDetached }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.createDefaultDiskLabeledNodes) }}
+ create-default-disk-labeled-nodes: {{ .Values.defaultSettings.createDefaultDiskLabeledNodes }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.defaultDataPath) }}
+ default-data-path: {{ .Values.defaultSettings.defaultDataPath }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.replicaSoftAntiAffinity) }}
+ replica-soft-anti-affinity: {{ .Values.defaultSettings.replicaSoftAntiAffinity }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.replicaAutoBalance) }}
+ replica-auto-balance: {{ .Values.defaultSettings.replicaAutoBalance }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.storageOverProvisioningPercentage) }}
+ storage-over-provisioning-percentage: {{ .Values.defaultSettings.storageOverProvisioningPercentage }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.storageMinimalAvailablePercentage) }}
+ storage-minimal-available-percentage: {{ .Values.defaultSettings.storageMinimalAvailablePercentage }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.storageReservedPercentageForDefaultDisk) }}
+ storage-reserved-percentage-for-default-disk: {{ .Values.defaultSettings.storageReservedPercentageForDefaultDisk }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.upgradeChecker) }}
+ upgrade-checker: {{ .Values.defaultSettings.upgradeChecker }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.defaultReplicaCount) }}
+ default-replica-count: {{ .Values.defaultSettings.defaultReplicaCount }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.defaultDataLocality) }}
+ default-data-locality: {{ .Values.defaultSettings.defaultDataLocality }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.defaultLonghornStaticStorageClass) }}
+ default-longhorn-static-storage-class: {{ .Values.defaultSettings.defaultLonghornStaticStorageClass }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.backupstorePollInterval) }}
+ backupstore-poll-interval: {{ .Values.defaultSettings.backupstorePollInterval }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.failedBackupTTL) }}
+ failed-backup-ttl: {{ .Values.defaultSettings.failedBackupTTL }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.restoreVolumeRecurringJobs) }}
+ restore-volume-recurring-jobs: {{ .Values.defaultSettings.restoreVolumeRecurringJobs }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.recurringSuccessfulJobsHistoryLimit) }}
+ recurring-successful-jobs-history-limit: {{ .Values.defaultSettings.recurringSuccessfulJobsHistoryLimit }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.recurringJobMaxRetention) }}
+ recurring-job-max-retention: {{ .Values.defaultSettings.recurringJobMaxRetention }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.recurringFailedJobsHistoryLimit) }}
+ recurring-failed-jobs-history-limit: {{ .Values.defaultSettings.recurringFailedJobsHistoryLimit }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.supportBundleFailedHistoryLimit) }}
+ support-bundle-failed-history-limit: {{ .Values.defaultSettings.supportBundleFailedHistoryLimit }}
+ {{- end }}
{{- if or (not (kindIs "invalid" .Values.defaultSettings.taintToleration)) (.Values.global.cattle.windowsCluster.enabled) }}
taint-toleration: {{ $windowsDefaultSettingTaintToleration := list }}{{ $defaultSettingTaintToleration := list -}}
{{- if and .Values.global.cattle.windowsCluster.enabled .Values.global.cattle.windowsCluster.defaultSetting.taintToleration -}}
@@ -46,38 +89,141 @@
{{- end -}}
{{- $nodeSelector := list $windowsDefaultSettingNodeSelector $defaultSettingNodeSelector }}{{ join ";" (compact $nodeSelector) -}}
{{- end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.priorityClass) }}priority-class: {{ .Values.defaultSettings.priorityClass }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.autoSalvage) }}auto-salvage: {{ .Values.defaultSettings.autoSalvage }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.autoDeletePodWhenVolumeDetachedUnexpectedly) }}auto-delete-pod-when-volume-detached-unexpectedly: {{ .Values.defaultSettings.autoDeletePodWhenVolumeDetachedUnexpectedly }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.disableSchedulingOnCordonedNode) }}disable-scheduling-on-cordoned-node: {{ .Values.defaultSettings.disableSchedulingOnCordonedNode }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.replicaZoneSoftAntiAffinity) }}replica-zone-soft-anti-affinity: {{ .Values.defaultSettings.replicaZoneSoftAntiAffinity }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.nodeDownPodDeletionPolicy) }}node-down-pod-deletion-policy: {{ .Values.defaultSettings.nodeDownPodDeletionPolicy }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.nodeDrainPolicy) }}node-drain-policy: {{ .Values.defaultSettings.nodeDrainPolicy }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.replicaReplenishmentWaitInterval) }}replica-replenishment-wait-interval: {{ .Values.defaultSettings.replicaReplenishmentWaitInterval }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.concurrentReplicaRebuildPerNodeLimit) }}concurrent-replica-rebuild-per-node-limit: {{ .Values.defaultSettings.concurrentReplicaRebuildPerNodeLimit }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.concurrentVolumeBackupRestorePerNodeLimit) }}concurrent-volume-backup-restore-per-node-limit: {{ .Values.defaultSettings.concurrentVolumeBackupRestorePerNodeLimit }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.disableRevisionCounter) }}disable-revision-counter: {{ .Values.defaultSettings.disableRevisionCounter }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.systemManagedPodsImagePullPolicy) }}system-managed-pods-image-pull-policy: {{ .Values.defaultSettings.systemManagedPodsImagePullPolicy }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.allowVolumeCreationWithDegradedAvailability) }}allow-volume-creation-with-degraded-availability: {{ .Values.defaultSettings.allowVolumeCreationWithDegradedAvailability }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.autoCleanupSystemGeneratedSnapshot) }}auto-cleanup-system-generated-snapshot: {{ .Values.defaultSettings.autoCleanupSystemGeneratedSnapshot }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.concurrentAutomaticEngineUpgradePerNodeLimit) }}concurrent-automatic-engine-upgrade-per-node-limit: {{ .Values.defaultSettings.concurrentAutomaticEngineUpgradePerNodeLimit }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.backingImageCleanupWaitInterval) }}backing-image-cleanup-wait-interval: {{ .Values.defaultSettings.backingImageCleanupWaitInterval }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.backingImageRecoveryWaitInterval) }}backing-image-recovery-wait-interval: {{ .Values.defaultSettings.backingImageRecoveryWaitInterval }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.guaranteedInstanceManagerCPU) }}guaranteed-instance-manager-cpu: {{ .Values.defaultSettings.guaranteedInstanceManagerCPU }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.kubernetesClusterAutoscalerEnabled) }}kubernetes-cluster-autoscaler-enabled: {{ .Values.defaultSettings.kubernetesClusterAutoscalerEnabled }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.orphanAutoDeletion) }}orphan-auto-deletion: {{ .Values.defaultSettings.orphanAutoDeletion }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.storageNetwork) }}storage-network: {{ .Values.defaultSettings.storageNetwork }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.deletingConfirmationFlag) }}deleting-confirmation-flag: {{ .Values.defaultSettings.deletingConfirmationFlag }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.engineReplicaTimeout) }}engine-replica-timeout: {{ .Values.defaultSettings.engineReplicaTimeout }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.snapshotDataIntegrity) }}snapshot-data-integrity: {{ .Values.defaultSettings.snapshotDataIntegrity }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.snapshotDataIntegrityImmediateCheckAfterSnapshotCreation) }}snapshot-data-integrity-immediate-check-after-snapshot-creation: {{ .Values.defaultSettings.snapshotDataIntegrityImmediateCheckAfterSnapshotCreation }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.snapshotDataIntegrityCronjob) }}snapshot-data-integrity-cronjob: {{ .Values.defaultSettings.snapshotDataIntegrityCronjob }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.removeSnapshotsDuringFilesystemTrim) }}remove-snapshots-during-filesystem-trim: {{ .Values.defaultSettings.removeSnapshotsDuringFilesystemTrim }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.fastReplicaRebuildEnabled) }}fast-replica-rebuild-enabled: {{ .Values.defaultSettings.fastReplicaRebuildEnabled }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.replicaFileSyncHttpClientTimeout) }}replica-file-sync-http-client-timeout: {{ .Values.defaultSettings.replicaFileSyncHttpClientTimeout }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.logLevel) }}log-level: {{ .Values.defaultSettings.logLevel }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.backupCompressionMethod) }}backup-compression-method: {{ .Values.defaultSettings.backupCompressionMethod }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.backupConcurrentLimit) }}backup-concurrent-limit: {{ .Values.defaultSettings.backupConcurrentLimit }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.restoreConcurrentLimit) }}restore-concurrent-limit: {{ .Values.defaultSettings.restoreConcurrentLimit }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.v2DataEngine) }}v2-data-engine: {{ .Values.defaultSettings.v2DataEngine }}{{ end }}
- {{ if not (kindIs "invalid" .Values.defaultSettings.offlineReplicaRebuilding) }}offline-replica-rebuilding: {{ .Values.defaultSettings.offlineReplicaRebuilding }}{{ end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.priorityClass) }}
+ priority-class: {{ .Values.defaultSettings.priorityClass }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.autoSalvage) }}
+ auto-salvage: {{ .Values.defaultSettings.autoSalvage }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.autoDeletePodWhenVolumeDetachedUnexpectedly) }}
+ auto-delete-pod-when-volume-detached-unexpectedly: {{ .Values.defaultSettings.autoDeletePodWhenVolumeDetachedUnexpectedly }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.disableSchedulingOnCordonedNode) }}
+ disable-scheduling-on-cordoned-node: {{ .Values.defaultSettings.disableSchedulingOnCordonedNode }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.replicaZoneSoftAntiAffinity) }}
+ replica-zone-soft-anti-affinity: {{ .Values.defaultSettings.replicaZoneSoftAntiAffinity }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.replicaDiskSoftAntiAffinity) }}
+ replica-disk-soft-anti-affinity: {{ .Values.defaultSettings.replicaDiskSoftAntiAffinity }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.nodeDownPodDeletionPolicy) }}
+ node-down-pod-deletion-policy: {{ .Values.defaultSettings.nodeDownPodDeletionPolicy }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.nodeDrainPolicy) }}
+ node-drain-policy: {{ .Values.defaultSettings.nodeDrainPolicy }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.detachManuallyAttachedVolumesWhenCordoned) }}
+ detach-manually-attached-volumes-when-cordoned: {{ .Values.defaultSettings.detachManuallyAttachedVolumesWhenCordoned }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.replicaReplenishmentWaitInterval) }}
+ replica-replenishment-wait-interval: {{ .Values.defaultSettings.replicaReplenishmentWaitInterval }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.concurrentReplicaRebuildPerNodeLimit) }}
+ concurrent-replica-rebuild-per-node-limit: {{ .Values.defaultSettings.concurrentReplicaRebuildPerNodeLimit }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.concurrentVolumeBackupRestorePerNodeLimit) }}
+ concurrent-volume-backup-restore-per-node-limit: {{ .Values.defaultSettings.concurrentVolumeBackupRestorePerNodeLimit }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.disableRevisionCounter) }}
+ disable-revision-counter: {{ .Values.defaultSettings.disableRevisionCounter }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.systemManagedPodsImagePullPolicy) }}
+ system-managed-pods-image-pull-policy: {{ .Values.defaultSettings.systemManagedPodsImagePullPolicy }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.allowVolumeCreationWithDegradedAvailability) }}
+ allow-volume-creation-with-degraded-availability: {{ .Values.defaultSettings.allowVolumeCreationWithDegradedAvailability }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.autoCleanupSystemGeneratedSnapshot) }}
+ auto-cleanup-system-generated-snapshot: {{ .Values.defaultSettings.autoCleanupSystemGeneratedSnapshot }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.autoCleanupRecurringJobBackupSnapshot) }}
+ auto-cleanup-recurring-job-backup-snapshot: {{ .Values.defaultSettings.autoCleanupRecurringJobBackupSnapshot }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.concurrentAutomaticEngineUpgradePerNodeLimit) }}
+ concurrent-automatic-engine-upgrade-per-node-limit: {{ .Values.defaultSettings.concurrentAutomaticEngineUpgradePerNodeLimit }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.backingImageCleanupWaitInterval) }}
+ backing-image-cleanup-wait-interval: {{ .Values.defaultSettings.backingImageCleanupWaitInterval }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.backingImageRecoveryWaitInterval) }}
+ backing-image-recovery-wait-interval: {{ .Values.defaultSettings.backingImageRecoveryWaitInterval }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.guaranteedInstanceManagerCPU) }}
+ guaranteed-instance-manager-cpu: {{ .Values.defaultSettings.guaranteedInstanceManagerCPU }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.kubernetesClusterAutoscalerEnabled) }}
+ kubernetes-cluster-autoscaler-enabled: {{ .Values.defaultSettings.kubernetesClusterAutoscalerEnabled }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.orphanAutoDeletion) }}
+ orphan-auto-deletion: {{ .Values.defaultSettings.orphanAutoDeletion }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.storageNetwork) }}
+ storage-network: {{ .Values.defaultSettings.storageNetwork }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.deletingConfirmationFlag) }}
+ deleting-confirmation-flag: {{ .Values.defaultSettings.deletingConfirmationFlag }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.engineReplicaTimeout) }}
+ engine-replica-timeout: {{ .Values.defaultSettings.engineReplicaTimeout }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.snapshotDataIntegrity) }}
+ snapshot-data-integrity: {{ .Values.defaultSettings.snapshotDataIntegrity }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.snapshotDataIntegrityImmediateCheckAfterSnapshotCreation) }}
+ snapshot-data-integrity-immediate-check-after-snapshot-creation: {{ .Values.defaultSettings.snapshotDataIntegrityImmediateCheckAfterSnapshotCreation }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.snapshotDataIntegrityCronjob) }}
+ snapshot-data-integrity-cronjob: {{ .Values.defaultSettings.snapshotDataIntegrityCronjob }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.removeSnapshotsDuringFilesystemTrim) }}
+ remove-snapshots-during-filesystem-trim: {{ .Values.defaultSettings.removeSnapshotsDuringFilesystemTrim }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.fastReplicaRebuildEnabled) }}
+ fast-replica-rebuild-enabled: {{ .Values.defaultSettings.fastReplicaRebuildEnabled }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.replicaFileSyncHttpClientTimeout) }}
+ replica-file-sync-http-client-timeout: {{ .Values.defaultSettings.replicaFileSyncHttpClientTimeout }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.logLevel) }}
+ log-level: {{ .Values.defaultSettings.logLevel }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.backupCompressionMethod) }}
+ backup-compression-method: {{ .Values.defaultSettings.backupCompressionMethod }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.backupConcurrentLimit) }}
+ backup-concurrent-limit: {{ .Values.defaultSettings.backupConcurrentLimit }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.restoreConcurrentLimit) }}
+ restore-concurrent-limit: {{ .Values.defaultSettings.restoreConcurrentLimit }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.v1DataEngine) }}
+ v1-data-engine: {{ .Values.defaultSettings.v1DataEngine }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.v2DataEngine) }}
+ v2-data-engine: {{ .Values.defaultSettings.v2DataEngine }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.v2DataEngineHugepageLimit) }}
+ v2-data-engine-hugepage-limit: {{ .Values.defaultSettings.v2DataEngineHugepageLimit }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.offlineReplicaRebuilding) }}
+ offline-replica-rebuilding: {{ .Values.defaultSettings.offlineReplicaRebuilding }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.allowEmptyNodeSelectorVolume) }}
+ allow-empty-node-selector-volume: {{ .Values.defaultSettings.allowEmptyNodeSelectorVolume }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.allowEmptyDiskSelectorVolume) }}
+ allow-empty-disk-selector-volume: {{ .Values.defaultSettings.allowEmptyDiskSelectorVolume }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.allowCollectingLonghornUsageMetrics) }}
+ allow-collecting-longhorn-usage-metrics: {{ .Values.defaultSettings.allowCollectingLonghornUsageMetrics }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.disableSnapshotPurge) }}
+ disable-snapshot-purge: {{ .Values.defaultSettings.disableSnapshotPurge }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.v2DataEngineGuaranteedInstanceManagerCPU) }}
+ v2-data-engine-guaranteed-instance-manager-cpu: {{ .Values.defaultSettings.v2DataEngineGuaranteedInstanceManagerCPU }}
+ {{- end }}
+ {{- if not (kindIs "invalid" .Values.defaultSettings.snapshotMaxCount) }}
+ snapshot-max-count: {{ .Values.defaultSettings.snapshotMaxCount }}
+ {{- end }}
\ No newline at end of file