update charts
diff --git a/charts/k8s-gerrit/container-images/apache-git-http-backend/Dockerfile b/charts/k8s-gerrit/container-images/apache-git-http-backend/Dockerfile
new file mode 100644
index 0000000..aa6c6c9
--- /dev/null
+++ b/charts/k8s-gerrit/container-images/apache-git-http-backend/Dockerfile
@@ -0,0 +1,30 @@
+ARG TAG=latest
+FROM base:${TAG}
+
+# Install apache2
+RUN apk update && \
+ apk add --no-cache \
+ apache2 \
+ apache2-ctl \
+ apache2-utils \
+ git-daemon \
+ logrotate && \
+ rm /etc/apache2/conf.d/default.conf && \
+ rm /etc/apache2/conf.d/info.conf
+
+# Configure git-http-backend
+COPY config/git-http-backend.conf /etc/apache2/conf.d/
+COPY config/envvars /usr/sbin/envvars
+COPY config/httpd.conf /etc/apache2/httpd.conf
+COPY config/logrotation /etc/logrotate.d/apache2
+
+COPY tools/start /var/tools/start
+COPY tools/project_admin.sh /var/cgi/project_admin.sh
+
+RUN mkdir -p /var/gerrit/git && \
+ mkdir -p /var/log/apache2 && \
+ chown -R gerrit:users /var/gerrit/git && \
+ chown -R gerrit:users /var/log/apache2
+
+# Start
+ENTRYPOINT ["ash", "/var/tools/start"]
diff --git a/charts/k8s-gerrit/container-images/apache-git-http-backend/README.md b/charts/k8s-gerrit/container-images/apache-git-http-backend/README.md
new file mode 100644
index 0000000..0b7146c
--- /dev/null
+++ b/charts/k8s-gerrit/container-images/apache-git-http-backend/README.md
@@ -0,0 +1,26 @@
+# apache-git-http-backend
+
+The apache-git-http-backend docker image serves as receiver in git replication
+from a Gerrit to a Gerrit replica.
+
+## Content
+
+* base image
+* Apache webserver
+* Apache configurations for http
+* git (via base image) and git-deamon for git-http-backend
+* `tools/project_admin.sh`: cgi script to enable remote creation/deletion/HEAD update
+ of git repositories. Compatible with replication plugin.
+* `tools/start`: start script, configures and starts Apache
+ webserver
+
+## Setup and Configuration
+
+* install Apache webserver, additional Apache tools and git daemon
+* configure Apache
+* install cgi scripts
+* map volumes
+
+## Start
+
+* start Apache git-http backend via start script `/var/tools/start`
diff --git a/charts/k8s-gerrit/container-images/apache-git-http-backend/config/envvars b/charts/k8s-gerrit/container-images/apache-git-http-backend/config/envvars
new file mode 100644
index 0000000..97d9f7e
--- /dev/null
+++ b/charts/k8s-gerrit/container-images/apache-git-http-backend/config/envvars
@@ -0,0 +1,43 @@
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# envvars-std - default environment variables for apachectl
+#
+# This file is generated from envvars-std.in
+#
+if test "x$LD_LIBRARY_PATH" != "x" ; then
+ LD_LIBRARY_PATH="/usr/lib:$LD_LIBRARY_PATH"
+else
+ LD_LIBRARY_PATH="/usr/lib"
+fi
+export LD_LIBRARY_PATH
+#
+
+# this won't be correct after changing uid
+unset HOME
+
+# Since there is no sane way to get the parsed apache2 config in scripts, some
+# settings are defined via environment variables and then used in apache2ctl,
+# /etc/init.d/apache2, /etc/logrotate.d/apache2, etc.
+export APACHE_RUN_USER=gerrit
+export APACHE_RUN_GROUP=users
+# Only /var/log/apache2 is handled by /etc/logrotate.d/apache2.
+export APACHE_LOG_DIR=/var/log/apache2$SUFFIX
+
+## Uncomment the following line to use the system default locale instead:
+#. /etc/default/locale
+
+export LANG
diff --git a/charts/k8s-gerrit/container-images/apache-git-http-backend/config/git-http-backend.conf b/charts/k8s-gerrit/container-images/apache-git-http-backend/config/git-http-backend.conf
new file mode 100644
index 0000000..8967bb1
--- /dev/null
+++ b/charts/k8s-gerrit/container-images/apache-git-http-backend/config/git-http-backend.conf
@@ -0,0 +1,58 @@
+<VirtualHost *:80>
+ # The ServerName directive sets the request scheme, hostname and port that
+ # the server uses to identify itself. This is used when creating
+ # redirection URLs. In the context of virtual hosts, the ServerName
+ # specifies what hostname must appear in the request's Host: header to
+ # match this virtual host. For the default virtual host (this file) this
+ # value is not decisive as it is used as a last resort host regardless.
+ # However, you must set it for any further virtual host explicitly.
+ ServerName localhost
+ ServerAdmin webmaster@localhost
+
+ UseCanonicalName On
+
+ AllowEncodedSlashes On
+
+ SetEnv GIT_PROJECT_ROOT /var/gerrit/git
+ SetEnv GIT_HTTP_EXPORT_ALL
+ ScriptAliasMatch "(?i)^/a/projects/(.*)" "/var/cgi/project_admin.sh"
+ ScriptAlias / /usr/libexec/git-core/git-http-backend/
+ ScriptLog logs/cgi.log
+
+ # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
+ # error, crit, alert, emerg.
+ # It is also possible to configure the loglevel for particular
+ # modules, e.g.
+ LogLevel debug authz_core:warn
+
+ # Don't log probe requests performed by kubernetes
+ SetEnvIFNoCase User-Agent "^kube-probe" dontlog
+
+ ErrorLog ${APACHE_LOG_DIR}/error.log
+ CustomLog ${APACHE_LOG_DIR}/access.log combined env=!dontlog
+
+ # For most configuration files from conf-available/, which are
+ # enabled or disabled at a global level, it is possible to
+ # include a line for only one particular virtual host. For example the
+ # following line enables the CGI configuration for this host only
+ # after it has been globally disabled with "a2disconf".
+ #Include conf-available/serve-cgi-bin.conf
+ <Files "git-http-backend">
+ AuthType Basic
+ AuthName "Restricted Content"
+ AuthUserFile /var/apache/credentials/.htpasswd
+ Require valid-user
+ </Files>
+ <Files "create_repo.sh">
+ AuthType Basic
+ AuthName "Restricted Content"
+ AuthUserFile /var/apache/credentials/.htpasswd
+ Require valid-user
+ </Files>
+ <Files "project_admin.sh">
+ AuthType Basic
+ AuthName "Restricted Content"
+ AuthUserFile /var/apache/credentials/.htpasswd
+ Require valid-user
+ </Files>
+</VirtualHost>
diff --git a/charts/k8s-gerrit/container-images/apache-git-http-backend/config/httpd.conf b/charts/k8s-gerrit/container-images/apache-git-http-backend/config/httpd.conf
new file mode 100644
index 0000000..7a28460
--- /dev/null
+++ b/charts/k8s-gerrit/container-images/apache-git-http-backend/config/httpd.conf
@@ -0,0 +1,510 @@
+# This is the main Apache HTTP server configuration file. It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
+# In particular, see
+# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
+# for a discussion of each configuration directive.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do. They're here only as hints or reminders. If you are unsure
+# consult the online docs. You have been warned.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path. If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
+# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
+# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
+# will be interpreted as '/logs/access_log'.
+
+#
+# ServerTokens
+# This directive configures what you return as the Server HTTP response
+# Header. The default is 'Full' which sends information about the OS-Type
+# and compiled in modules.
+# Set to one of: Full | OS | Minor | Minimal | Major | Prod
+# where Full conveys the most information, and Prod the least.
+#
+ServerTokens OS
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# Do not add a slash at the end of the directory path. If you point
+# ServerRoot at a non-local disk, be sure to specify a local disk on the
+# Mutex directive, if file-based mutexes are used. If you wish to share the
+# same ServerRoot for multiple httpd daemons, you will need to change at
+# least PidFile.
+#
+ServerRoot /var/www
+
+#
+# Mutex: Allows you to set the mutex mechanism and mutex file directory
+# for individual mutexes, or change the global defaults
+#
+# Uncomment and change the directory if mutexes are file-based and the default
+# mutex file directory is not on a local disk or is not appropriate for some
+# other reason.
+#
+# Mutex default:/run/apache2
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to
+# prevent Apache from glomming onto all bound IP addresses.
+#
+#Listen 12.34.56.78:80
+Listen 80
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Statically compiled modules (those listed by `httpd -l') do not need
+# to be loaded here.
+#
+# Example:
+# LoadModule foo_module modules/mod_foo.so
+#
+LoadModule mpm_event_module modules/mod_mpm_event.so
+#LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
+#LoadModule mpm_worker_module modules/mod_mpm_worker.so
+LoadModule authn_file_module modules/mod_authn_file.so
+#LoadModule authn_dbm_module modules/mod_authn_dbm.so
+#LoadModule authn_anon_module modules/mod_authn_anon.so
+#LoadModule authn_dbd_module modules/mod_authn_dbd.so
+#LoadModule authn_socache_module modules/mod_authn_socache.so
+LoadModule authn_core_module modules/mod_authn_core.so
+LoadModule authz_host_module modules/mod_authz_host.so
+LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
+LoadModule authz_user_module modules/mod_authz_user.so
+#LoadModule authz_dbm_module modules/mod_authz_dbm.so
+#LoadModule authz_owner_module modules/mod_authz_owner.so
+#LoadModule authz_dbd_module modules/mod_authz_dbd.so
+LoadModule authz_core_module modules/mod_authz_core.so
+LoadModule access_compat_module modules/mod_access_compat.so
+LoadModule auth_basic_module modules/mod_auth_basic.so
+#LoadModule auth_form_module modules/mod_auth_form.so
+#LoadModule auth_digest_module modules/mod_auth_digest.so
+#LoadModule allowmethods_module modules/mod_allowmethods.so
+#LoadModule file_cache_module modules/mod_file_cache.so
+#LoadModule cache_module modules/mod_cache.so
+#LoadModule cache_disk_module modules/mod_cache_disk.so
+#LoadModule cache_socache_module modules/mod_cache_socache.so
+#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
+#LoadModule socache_dbm_module modules/mod_socache_dbm.so
+#LoadModule socache_memcache_module modules/mod_socache_memcache.so
+#LoadModule socache_redis_module modules/mod_socache_redis.so
+#LoadModule watchdog_module modules/mod_watchdog.so
+#LoadModule macro_module modules/mod_macro.so
+#LoadModule dbd_module modules/mod_dbd.so
+#LoadModule dumpio_module modules/mod_dumpio.so
+#LoadModule echo_module modules/mod_echo.so
+#LoadModule buffer_module modules/mod_buffer.so
+#LoadModule data_module modules/mod_data.so
+#LoadModule ratelimit_module modules/mod_ratelimit.so
+LoadModule reqtimeout_module modules/mod_reqtimeout.so
+#LoadModule ext_filter_module modules/mod_ext_filter.so
+#LoadModule request_module modules/mod_request.so
+#LoadModule include_module modules/mod_include.so
+LoadModule filter_module modules/mod_filter.so
+#LoadModule reflector_module modules/mod_reflector.so
+#LoadModule substitute_module modules/mod_substitute.so
+#LoadModule sed_module modules/mod_sed.so
+#LoadModule charset_lite_module modules/mod_charset_lite.so
+#LoadModule deflate_module modules/mod_deflate.so
+LoadModule mime_module modules/mod_mime.so
+LoadModule log_config_module modules/mod_log_config.so
+#LoadModule log_debug_module modules/mod_log_debug.so
+#LoadModule log_forensic_module modules/mod_log_forensic.so
+#LoadModule logio_module modules/mod_logio.so
+LoadModule env_module modules/mod_env.so
+#LoadModule mime_magic_module modules/mod_mime_magic.so
+#LoadModule expires_module modules/mod_expires.so
+LoadModule headers_module modules/mod_headers.so
+#LoadModule usertrack_module modules/mod_usertrack.so
+#LoadModule unique_id_module modules/mod_unique_id.so
+LoadModule setenvif_module modules/mod_setenvif.so
+LoadModule version_module modules/mod_version.so
+#LoadModule remoteip_module modules/mod_remoteip.so
+#LoadModule session_module modules/mod_session.so
+#LoadModule session_cookie_module modules/mod_session_cookie.so
+#LoadModule session_crypto_module modules/mod_session_crypto.so
+#LoadModule session_dbd_module modules/mod_session_dbd.so
+#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
+#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
+#LoadModule dialup_module modules/mod_dialup.so
+#LoadModule http2_module modules/mod_http2.so
+LoadModule unixd_module modules/mod_unixd.so
+#LoadModule heartbeat_module modules/mod_heartbeat.so
+#LoadModule heartmonitor_module modules/mod_heartmonitor.so
+LoadModule status_module modules/mod_status.so
+LoadModule autoindex_module modules/mod_autoindex.so
+#LoadModule asis_module modules/mod_asis.so
+#LoadModule info_module modules/mod_info.so
+#LoadModule suexec_module modules/mod_suexec.so
+<IfModule !mpm_prefork_module>
+ LoadModule cgid_module modules/mod_cgid.so
+</IfModule>
+<IfModule mpm_prefork_module>
+ LoadModule cgi_module modules/mod_cgi.so
+</IfModule>
+#LoadModule vhost_alias_module modules/mod_vhost_alias.so
+#LoadModule negotiation_module modules/mod_negotiation.so
+LoadModule dir_module modules/mod_dir.so
+#LoadModule actions_module modules/mod_actions.so
+#LoadModule speling_module modules/mod_speling.so
+#LoadModule userdir_module modules/mod_userdir.so
+LoadModule alias_module modules/mod_alias.so
+#LoadModule rewrite_module modules/mod_rewrite.so
+LoadModule info_module modules/mod_info.so
+
+LoadModule negotiation_module modules/mod_negotiation.so
+
+<IfModule unixd_module>
+#
+# If you wish httpd to run as a different user or group, you must run
+# httpd as root initially and it will switch.
+#
+# User/Group: The name (or #number) of the user/group to run httpd as.
+# It is usually good practice to create a dedicated user and group for
+# running httpd, as with most system services.
+#
+User ${APACHE_RUN_USER}
+Group ${APACHE_RUN_GROUP}
+
+#
+# Timeout defines, in seconds, the amount of time that the server waits for
+# receipts and transmissions during communications. Timeout is set to 300
+# seconds by default, which is appropriate for most situations.
+#
+Timeout 300
+
+</IfModule>
+
+# 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition. These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed. This address appears on some server-generated pages, such
+# as error documents. e.g. admin@your-domain.com
+#
+# ServerAdmin you@example.com
+
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory
+# listings, mod_status and mod_info output etc., but not CGI generated
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of: On | Off | EMail
+#
+ServerSignature On
+
+#
+# ServerName gives the name and port that the server uses to identify itself.
+# This can often be determined automatically, but we recommend you specify
+# it explicitly to prevent problems during startup.
+#
+# If your host doesn't have a registered DNS name, enter its IP address here.
+#
+#ServerName www.example.com:80
+
+#
+# Deny access to the entirety of your server's filesystem. You must
+# explicitly permit access to web content directories in other
+# <Directory> blocks below.
+#
+<Directory />
+ AllowOverride none
+ Require all denied
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "/var/www/localhost/htdocs"
+<Directory "/var/www/localhost/htdocs">
+ #
+ # Possible values for the Options directive are "None", "All",
+ # or any combination of:
+ # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+ #
+ # Note that "MultiViews" must be named *explicitly* --- "Options All"
+ # doesn't give it to you.
+ #
+ # The Options directive is both complicated and important. Please see
+ # http://httpd.apache.org/docs/2.4/mod/core.html#options
+ # for more information.
+ #
+ Options Indexes FollowSymLinks ExecCGI
+
+ #
+ # AllowOverride controls what directives may be placed in .htaccess files.
+ # It can be "All", "None", or any combination of the keywords:
+ # AllowOverride FileInfo AuthConfig Limit
+ #
+ AllowOverride None
+
+ #
+ # Controls who can get stuff from this server.
+ #
+ Require all granted
+</Directory>
+
+#
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+<IfModule dir_module>
+ DirectoryIndex index.html
+</IfModule>
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+#
+<Files ".ht*">
+ Require all denied
+</Files>
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog ${APACHE_LOG_DIR}/error.log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel debug authz_core:warn
+
+<IfModule log_config_module>
+ #
+ # The following directives define some format nicknames for use with
+ # a CustomLog directive (see below).
+ #
+ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+ LogFormat "%h %l %u %t \"%r\" %>s %b" common
+
+ <IfModule logio_module>
+ # You need to enable mod_logio.c to use %I and %O
+ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+ </IfModule>
+
+ #
+ # The location and format of the access logfile (Common Logfile Format).
+ # If you do not define any access logfiles within a <VirtualHost>
+ # container, they will be logged here. Contrariwise, if you *do*
+ # define per-<VirtualHost> access logfiles, transactions will be
+ # logged therein and *not* in this file.
+ #
+ #CustomLog logs/access.log common
+
+ #
+ # If you prefer a logfile with access, agent, and referer information
+ # (Combined Logfile Format) you can use the following directive.
+ #
+ CustomLog logs/access.log combined
+</IfModule>
+
+<IfModule alias_module>
+ #
+ # Redirect: Allows you to tell clients about documents that used to
+ # exist in your server's namespace, but do not anymore. The client
+ # will make a new request for the document at its new location.
+ # Example:
+ # Redirect permanent /foo http://www.example.com/bar
+
+ #
+ # Alias: Maps web paths into filesystem paths and is used to
+ # access content that does not live under the DocumentRoot.
+ # Example:
+ # Alias /webpath /full/filesystem/path
+ #
+ # If you include a trailing / on /webpath then the server will
+ # require it to be present in the URL. You will also likely
+ # need to provide a <Directory> section to allow access to
+ # the filesystem path.
+
+ #
+ # ScriptAlias: This controls which directories contain server scripts.
+ # ScriptAliases are essentially the same as Aliases, except that
+ # documents in the target directory are treated as applications and
+ # run by the server when requested rather than as documents sent to the
+ # client. The same rules about trailing "/" apply to ScriptAlias
+ # directives as to Alias.
+ #
+ ScriptAlias /cgi-bin/ "/var/www/localhost/cgi-bin/"
+
+</IfModule>
+
+<IfModule cgid_module>
+ #
+ # ScriptSock: On threaded servers, designate the path to the UNIX
+ # socket used to communicate with the CGI daemon of mod_cgid.
+ #
+ Scriptsock cgisock
+</IfModule>
+
+#
+# "/var/www/localhost/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "/var/cgi">
+ AllowOverride None
+ Options None
+ Require all granted
+</Directory>
+
+<IfModule headers_module>
+ #
+ # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
+ # backend servers which have lingering "httpoxy" defects.
+ # 'Proxy' request header is undefined by the IETF, not listed by IANA
+ #
+ RequestHeader unset Proxy early
+</IfModule>
+
+<IfModule mime_module>
+ #
+ # TypesConfig points to the file containing the list of mappings from
+ # filename extension to MIME-type.
+ #
+ TypesConfig /etc/apache2/mime.types
+
+ #
+ # AddType allows you to add to or override the MIME configuration
+ # file specified in TypesConfig for specific file types.
+ #
+ #AddType application/x-gzip .tgz
+ #
+ # AddEncoding allows you to have certain browsers uncompress
+ # information on the fly. Note: Not all browsers support this.
+ #
+ #AddEncoding x-compress .Z
+ #AddEncoding x-gzip .gz .tgz
+ #
+ # If the AddEncoding directives above are commented-out, then you
+ # probably should define those extensions to indicate media types:
+ #
+ AddType application/x-compress .Z
+ AddType application/x-gzip .gz .tgz
+
+ #
+ # AddHandler allows you to map certain file extensions to "handlers":
+ # actions unrelated to filetype. These can be either built into the server
+ # or added with the Action directive (see below)
+ #
+ # To use CGI scripts outside of ScriptAliased directories:
+ # (You will also need to add "ExecCGI" to the "Options" directive.)
+ #
+ AddHandler cgi-script .cgi .sh
+
+ # For type maps (negotiated resources):
+ #AddHandler type-map var
+
+ #
+ # Filters allow you to process content before it is sent to the client.
+ #
+ # To parse .shtml files for server-side includes (SSI):
+ # (You will also need to add "Includes" to the "Options" directive.)
+ #
+ #AddType text/html .shtml
+ #AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+<IfModule status_module>
+#
+# Allow server status reports generated by mod_status,
+# with the URL of http://servername/server-status
+# Change the ".example.com" to match your domain to enable.
+
+<Location /server-status>
+ SetHandler server-status
+ Require ip 127.0.0.1
+</Location>
+
+#
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called. The default is Off.
+#
+#ExtendedStatus On
+</IfModule>
+
+<IfModule info_module>
+#
+# Allow remote server configuration reports, with the URL of
+# http://servername/server-info (requires that mod_info.c be loaded).
+# Change the ".example.com" to match your domain to enable.
+#
+<Location /server-info>
+ SetHandler server-info
+ Require ip 127.0.0.1
+</Location>
+</IfModule>
+
+#
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+#
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+#
+
+#
+# MaxRanges: Maximum number of Ranges in a request before
+# returning the entire resource, or one of the special
+# values 'default', 'none' or 'unlimited'.
+# Default setting is to accept 200 Ranges.
+#MaxRanges unlimited
+
+#
+# EnableMMAP and EnableSendfile: On systems that support it,
+# memory-mapping or the sendfile syscall may be used to deliver
+# files. This usually improves server performance, but must
+# be turned off when serving from networked-mounted
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+# Defaults: EnableMMAP On, EnableSendfile Off
+#
+#EnableMMAP off
+#EnableSendfile on
+
+# Load config files from the config directory "/etc/apache2/conf.d".
+#
+IncludeOptional /etc/apache2/conf.d/*.conf
diff --git a/charts/k8s-gerrit/container-images/apache-git-http-backend/config/logrotation b/charts/k8s-gerrit/container-images/apache-git-http-backend/config/logrotation
new file mode 100644
index 0000000..282b1e8
--- /dev/null
+++ b/charts/k8s-gerrit/container-images/apache-git-http-backend/config/logrotation
@@ -0,0 +1,12 @@
+/var/log/apache2/*log {
+ daily
+ dateext
+ compress
+ delaycompress
+ missingok
+ notifempty
+ sharedscripts
+ postrotate
+ /etc/init.d/apache2 --quiet --ifstarted reload > /dev/null 2>/dev/null || true
+ endscript
+}
diff --git a/charts/k8s-gerrit/container-images/apache-git-http-backend/tools/project_admin.sh b/charts/k8s-gerrit/container-images/apache-git-http-backend/tools/project_admin.sh
new file mode 100755
index 0000000..7b46ac9
--- /dev/null
+++ b/charts/k8s-gerrit/container-images/apache-git-http-backend/tools/project_admin.sh
@@ -0,0 +1,66 @@
+#!/bin/ash
+
+delete() {
+ rm -rf /var/gerrit/git/${REPO}.git
+
+ if ! test -f /var/gerrit/git/${REPO}.git; then
+ STATUS_CODE="204 No Content"
+ MESSAGE="Repository ${REPO} deleted."
+ else
+ MESSAGE="Repository ${REPO} could not be deleted."
+ fi
+}
+
+new() {
+ if test -d /var/gerrit/git/${REPO}.git; then
+ STATUS_CODE="200 OK"
+ MESSAGE="Repository already available."
+ else
+ git init --bare /var/gerrit/git/${REPO}.git > /dev/null
+ if test -f /var/gerrit/git/${REPO}.git/HEAD; then
+ STATUS_CODE="201 Created"
+ MESSAGE="Repository ${REPO} created."
+ else
+ MESSAGE="Repository ${REPO} could not be created."
+ fi
+ fi
+}
+
+update_head(){
+ read -n ${CONTENT_LENGTH} POST_STRING
+ NEW_HEAD=$(echo ${POST_STRING} | jq .ref - | tr -d '"')
+
+ git --git-dir /var/gerrit/git/${REPO}.git symbolic-ref HEAD ${NEW_HEAD}
+
+ if test "ref: ${NEW_HEAD}" == "$(cat /var/gerrit/git/${REPO}.git/HEAD)"; then
+ STATUS_CODE="200 OK"
+ MESSAGE="Repository HEAD updated to ${NEW_HEAD}."
+ else
+ MESSAGE="Repository HEAD could not be updated to ${NEW_HEAD}."
+ fi
+}
+
+echo "Content-type: text/html"
+REPO=${REQUEST_URI##/a/projects/}
+REPO="${REPO//%2F//}"
+REPO="${REPO%%.git}"
+
+if test "${REQUEST_METHOD}" == "PUT"; then
+ if [[ ${REQUEST_URI} == */HEAD ]]; then
+ REPO=${REPO%"/HEAD"}
+ update_head
+ else
+ new
+ fi
+elif test "${REQUEST_METHOD}" == "DELETE"; then
+ delete
+else
+ STATUS_CODE="400 Bad Request"
+ MESSAGE="Unknown method."
+fi
+
+test -z ${STATUS_CODE} && STATUS_CODE="500 Internal Server Error"
+
+echo "Status: ${STATUS_CODE}"
+echo ""
+echo "${MESSAGE}"
diff --git a/charts/k8s-gerrit/container-images/apache-git-http-backend/tools/start b/charts/k8s-gerrit/container-images/apache-git-http-backend/tools/start
new file mode 100755
index 0000000..6b47114
--- /dev/null
+++ b/charts/k8s-gerrit/container-images/apache-git-http-backend/tools/start
@@ -0,0 +1,4 @@
+#!/bin/ash
+
+/usr/sbin/apachectl start \
+ && tail -F -q -n +1 /var/log/apache2/*.log