charts
diff --git a/charts/ingress-nginx/values.yaml b/charts/ingress-nginx/values.yaml
new file mode 100644
index 0000000..602b7f5
--- /dev/null
+++ b/charts/ingress-nginx/values.yaml
@@ -0,0 +1,856 @@
+## nginx configuration
+## Ref: https://github.com/kubernetes/ingress-nginx/blob/main/docs/user-guide/nginx-configuration/index.md
+##
+
+## Overrides for generated resource names
+# See templates/_helpers.tpl
+# nameOverride:
+# fullnameOverride:
+
+controller:
+ name: controller
+ image:
+ registry: k8s.gcr.io
+ image: ingress-nginx/controller
+ # for backwards compatibility consider setting the full image url via the repository value below
+ # use *either* current default registry/image or repository format or installing chart by providing the values.yaml will fail
+ # repository:
+ tag: "v1.0.2"
+ digest: sha256:85b53b493d6d658d8c013449223b0ffd739c76d76dc9bf9000786669ec04e049
+ pullPolicy: IfNotPresent
+ # www-data -> uid 101
+ runAsUser: 101
+ allowPrivilegeEscalation: true
+
+ # Use an existing PSP instead of creating one
+ existingPsp: ""
+
+ # Configures the controller container name
+ containerName: controller
+
+ # Configures the ports the nginx-controller listens on
+ containerPort:
+ http: 80
+ https: 443
+
+ # Will add custom configuration options to Nginx https://kubernetes.github.io/ingress-nginx/user-guide/nginx-configuration/configmap/
+ config: {}
+
+ ## Annotations to be added to the controller config configuration configmap
+ ##
+ configAnnotations: {}
+
+ # Will add custom headers before sending traffic to backends according to https://github.com/kubernetes/ingress-nginx/tree/main/docs/examples/customization/custom-headers
+ proxySetHeaders: {}
+
+ # Will add custom headers before sending response traffic to the client according to: https://kubernetes.github.io/ingress-nginx/user-guide/nginx-configuration/configmap/#add-headers
+ addHeaders: {}
+
+ # Optionally customize the pod dnsConfig.
+ dnsConfig: {}
+
+ # Optionally customize the pod hostname.
+ hostname: {}
+
+ # Optionally change this to ClusterFirstWithHostNet in case you have 'hostNetwork: true'.
+ # By default, while using host network, name resolution uses the host's DNS. If you wish nginx-controller
+ # to keep resolving names inside the k8s network, use ClusterFirstWithHostNet.
+ dnsPolicy: ClusterFirst
+
+ # Bare-metal considerations via the host network https://kubernetes.github.io/ingress-nginx/deploy/baremetal/#via-the-host-network
+ # Ingress status was blank because there is no Service exposing the NGINX Ingress controller in a configuration using the host network, the default --publish-service flag used in standard cloud setups does not apply
+ reportNodeInternalIp: false
+
+ # Process Ingress objects without ingressClass annotation/ingressClassName field
+ # Overrides value for --watch-ingress-without-class flag of the controller binary
+ # Defaults to false
+ watchIngressWithoutClass: false
+
+ # Process IngressClass per name (additionally as per spec.controller)
+ ingressClassByName: false
+
+ # This configuration defines if Ingress Controller should allow users to set
+ # their own *-snippet annotations, otherwise this is forbidden / dropped
+ # when users add those annotations.
+ # Global snippets in ConfigMap are still respected
+ allowSnippetAnnotations: true
+
+ # Required for use with CNI based kubernetes installations (such as ones set up by kubeadm),
+ # since CNI and hostport don't mix yet. Can be deprecated once https://github.com/kubernetes/kubernetes/issues/23920
+ # is merged
+ hostNetwork: false
+
+ ## Use host ports 80 and 443
+ ## Disabled by default
+ ##
+ hostPort:
+ enabled: false
+ ports:
+ http: 80
+ https: 443
+
+ ## Election ID to use for status update
+ ##
+ electionID: ingress-controller-leader
+
+ # This section refers to the creation of the IngressClass resource
+ # IngressClass resources are supported since k8s >= 1.18 and required since k8s >= 1.19
+ ingressClassResource:
+ name: nginx
+ enabled: true
+ default: false
+ controllerValue: "k8s.io/ingress-nginx"
+
+ # Parameters is a link to a custom resource containing additional
+ # configuration for the controller. This is optional if the controller
+ # does not require extra parameters.
+ parameters: {}
+
+ # labels to add to the pod container metadata
+ podLabels: {}
+ # key: value
+
+ ## Security Context policies for controller pods
+ ##
+ podSecurityContext: {}
+
+ ## See https://kubernetes.io/docs/tasks/administer-cluster/sysctl-cluster/ for
+ ## notes on enabling and using sysctls
+ ###
+ sysctls: {}
+ # sysctls:
+ # "net.core.somaxconn": "8192"
+
+ ## Allows customization of the source of the IP address or FQDN to report
+ ## in the ingress status field. By default, it reads the information provided
+ ## by the service. If disable, the status field reports the IP address of the
+ ## node or nodes where an ingress controller pod is running.
+ publishService:
+ enabled: true
+ ## Allows overriding of the publish service to bind to
+ ## Must be <namespace>/<service_name>
+ ##
+ pathOverride: ""
+
+ ## Limit the scope of the controller
+ ##
+ scope:
+ enabled: false
+ namespace: "" # defaults to $(POD_NAMESPACE)
+
+ ## Allows customization of the configmap / nginx-configmap namespace
+ ##
+ configMapNamespace: "" # defaults to $(POD_NAMESPACE)
+
+ ## Allows customization of the tcp-services-configmap
+ ##
+ tcp:
+ configMapNamespace: "" # defaults to $(POD_NAMESPACE)
+ ## Annotations to be added to the tcp config configmap
+ annotations: {}
+
+ ## Allows customization of the udp-services-configmap
+ ##
+ udp:
+ configMapNamespace: "" # defaults to $(POD_NAMESPACE)
+ ## Annotations to be added to the udp config configmap
+ annotations: {}
+
+ # Maxmind license key to download GeoLite2 Databases
+ # https://blog.maxmind.com/2019/12/18/significant-changes-to-accessing-and-using-geolite2-databases
+ maxmindLicenseKey: ""
+
+ ## Additional command line arguments to pass to nginx-ingress-controller
+ ## E.g. to specify the default SSL certificate you can use
+ ## extraArgs:
+ ## default-ssl-certificate: "<namespace>/<secret_name>"
+ extraArgs: {}
+
+ ## Additional environment variables to set
+ extraEnvs: []
+ # extraEnvs:
+ # - name: FOO
+ # valueFrom:
+ # secretKeyRef:
+ # key: FOO
+ # name: secret-resource
+
+ ## DaemonSet or Deployment
+ ##
+ kind: Deployment
+
+ ## Annotations to be added to the controller Deployment or DaemonSet
+ ##
+ annotations: {}
+ # keel.sh/pollSchedule: "@every 60m"
+
+ ## Labels to be added to the controller Deployment or DaemonSet
+ ##
+ labels: {}
+ # keel.sh/policy: patch
+ # keel.sh/trigger: poll
+
+
+ # The update strategy to apply to the Deployment or DaemonSet
+ ##
+ updateStrategy: {}
+ # rollingUpdate:
+ # maxUnavailable: 1
+ # type: RollingUpdate
+
+ # minReadySeconds to avoid killing pods before we are ready
+ ##
+ minReadySeconds: 0
+
+
+ ## Node tolerations for server scheduling to nodes with taints
+ ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/
+ ##
+ tolerations: []
+ # - key: "key"
+ # operator: "Equal|Exists"
+ # value: "value"
+ # effect: "NoSchedule|PreferNoSchedule|NoExecute(1.6 only)"
+
+ ## Affinity and anti-affinity
+ ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
+ ##
+ affinity: {}
+ # # An example of preferred pod anti-affinity, weight is in the range 1-100
+ # podAntiAffinity:
+ # preferredDuringSchedulingIgnoredDuringExecution:
+ # - weight: 100
+ # podAffinityTerm:
+ # labelSelector:
+ # matchExpressions:
+ # - key: app.kubernetes.io/name
+ # operator: In
+ # values:
+ # - ingress-nginx
+ # - key: app.kubernetes.io/instance
+ # operator: In
+ # values:
+ # - ingress-nginx
+ # - key: app.kubernetes.io/component
+ # operator: In
+ # values:
+ # - controller
+ # topologyKey: kubernetes.io/hostname
+
+ # # An example of required pod anti-affinity
+ # podAntiAffinity:
+ # requiredDuringSchedulingIgnoredDuringExecution:
+ # - labelSelector:
+ # matchExpressions:
+ # - key: app.kubernetes.io/name
+ # operator: In
+ # values:
+ # - ingress-nginx
+ # - key: app.kubernetes.io/instance
+ # operator: In
+ # values:
+ # - ingress-nginx
+ # - key: app.kubernetes.io/component
+ # operator: In
+ # values:
+ # - controller
+ # topologyKey: "kubernetes.io/hostname"
+
+ ## Topology spread constraints rely on node labels to identify the topology domain(s) that each Node is in.
+ ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
+ ##
+ topologySpreadConstraints: []
+ # - maxSkew: 1
+ # topologyKey: failure-domain.beta.kubernetes.io/zone
+ # whenUnsatisfiable: DoNotSchedule
+ # labelSelector:
+ # matchLabels:
+ # app.kubernetes.io/instance: ingress-nginx-internal
+
+ ## terminationGracePeriodSeconds
+ ## wait up to five minutes for the drain of connections
+ ##
+ terminationGracePeriodSeconds: 300
+
+ ## Node labels for controller pod assignment
+ ## Ref: https://kubernetes.io/docs/user-guide/node-selection/
+ ##
+ nodeSelector:
+ kubernetes.io/os: linux
+
+ ## Liveness and readiness probe values
+ ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
+ ##
+ # startupProbe:
+ # httpGet:
+ # # should match container.healthCheckPath
+ # path: "/healthz"
+ # port: 10254
+ # scheme: HTTP
+ # initialDelaySeconds: 5
+ # periodSeconds: 5
+ # timeoutSeconds: 2
+ # successThreshold: 1
+ # failureThreshold: 5
+ livenessProbe:
+ httpGet:
+ # should match container.healthCheckPath
+ path: "/healthz"
+ port: 10254
+ scheme: HTTP
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ timeoutSeconds: 1
+ successThreshold: 1
+ failureThreshold: 5
+ readinessProbe:
+ httpGet:
+ # should match container.healthCheckPath
+ path: "/healthz"
+ port: 10254
+ scheme: HTTP
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ timeoutSeconds: 1
+ successThreshold: 1
+ failureThreshold: 3
+
+
+ # Path of the health check endpoint. All requests received on the port defined by
+ # the healthz-port parameter are forwarded internally to this path.
+ healthCheckPath: "/healthz"
+
+ # Address to bind the health check endpoint.
+ # It is better to set this option to the internal node address
+ # if the ingress nginx controller is running in the hostNetwork: true mode.
+ healthCheckHost: ""
+
+ ## Annotations to be added to controller pods
+ ##
+ podAnnotations: {}
+
+ replicaCount: 1
+
+ minAvailable: 1
+
+ # Define requests resources to avoid probe issues due to CPU utilization in busy nodes
+ # ref: https://github.com/kubernetes/ingress-nginx/issues/4735#issuecomment-551204903
+ # Ideally, there should be no limits.
+ # https://engineering.indeedblog.com/blog/2019/12/cpu-throttling-regression-fix/
+ resources:
+ # limits:
+ # cpu: 100m
+ # memory: 90Mi
+ requests:
+ cpu: 100m
+ memory: 90Mi
+
+ # Mutually exclusive with keda autoscaling
+ autoscaling:
+ enabled: false
+ minReplicas: 1
+ maxReplicas: 11
+ targetCPUUtilizationPercentage: 50
+ targetMemoryUtilizationPercentage: 50
+ behavior: {}
+ # scaleDown:
+ # stabilizationWindowSeconds: 300
+ # policies:
+ # - type: Pods
+ # value: 1
+ # periodSeconds: 180
+ # scaleUp:
+ # stabilizationWindowSeconds: 300
+ # policies:
+ # - type: Pods
+ # value: 2
+ # periodSeconds: 60
+
+ autoscalingTemplate: []
+ # Custom or additional autoscaling metrics
+ # ref: https://kubernetes.io/docs/tasks/run-application/horizontal-pod-autoscale/#support-for-custom-metrics
+ # - type: Pods
+ # pods:
+ # metric:
+ # name: nginx_ingress_controller_nginx_process_requests_total
+ # target:
+ # type: AverageValue
+ # averageValue: 10000m
+
+ # Mutually exclusive with hpa autoscaling
+ keda:
+ apiVersion: "keda.sh/v1alpha1"
+ # apiVersion changes with keda 1.x vs 2.x
+ # 2.x = keda.sh/v1alpha1
+ # 1.x = keda.k8s.io/v1alpha1
+ enabled: false
+ minReplicas: 1
+ maxReplicas: 11
+ pollingInterval: 30
+ cooldownPeriod: 300
+ restoreToOriginalReplicaCount: false
+ scaledObject:
+ annotations: {}
+ # Custom annotations for ScaledObject resource
+ # annotations:
+ # key: value
+ triggers: []
+ # - type: prometheus
+ # metadata:
+ # serverAddress: http://<prometheus-host>:9090
+ # metricName: http_requests_total
+ # threshold: '100'
+ # query: sum(rate(http_requests_total{deployment="my-deployment"}[2m]))
+
+ behavior: {}
+ # scaleDown:
+ # stabilizationWindowSeconds: 300
+ # policies:
+ # - type: Pods
+ # value: 1
+ # periodSeconds: 180
+ # scaleUp:
+ # stabilizationWindowSeconds: 300
+ # policies:
+ # - type: Pods
+ # value: 2
+ # periodSeconds: 60
+
+ ## Enable mimalloc as a drop-in replacement for malloc.
+ ## ref: https://github.com/microsoft/mimalloc
+ ##
+ enableMimalloc: true
+
+ ## Override NGINX template
+ customTemplate:
+ configMapName: ""
+ configMapKey: ""
+
+ service:
+ enabled: true
+
+ annotations: {}
+ labels: {}
+ # clusterIP: ""
+
+ ## List of IP addresses at which the controller services are available
+ ## Ref: https://kubernetes.io/docs/user-guide/services/#external-ips
+ ##
+ externalIPs: []
+
+ # loadBalancerIP: ""
+ loadBalancerSourceRanges: []
+
+ enableHttp: true
+ enableHttps: true
+
+ ## Set external traffic policy to: "Local" to preserve source IP on
+ ## providers supporting it
+ ## Ref: https://kubernetes.io/docs/tutorials/services/source-ip/#source-ip-for-services-with-typeloadbalancer
+ # externalTrafficPolicy: ""
+
+ # Must be either "None" or "ClientIP" if set. Kubernetes will default to "None".
+ # Ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
+ # sessionAffinity: ""
+
+ # specifies the health check node port (numeric port number) for the service. If healthCheckNodePort isn’t specified,
+ # the service controller allocates a port from your cluster’s NodePort range.
+ # Ref: https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
+ # healthCheckNodePort: 0
+
+ ports:
+ http: 80
+ https: 443
+
+ targetPorts:
+ http: http
+ https: https
+
+ type: LoadBalancer
+
+ # type: NodePort
+ # nodePorts:
+ # http: 32080
+ # https: 32443
+ # tcp:
+ # 8080: 32808
+ nodePorts:
+ http: ""
+ https: ""
+ tcp: {}
+ udp: {}
+
+ ## Enables an additional internal load balancer (besides the external one).
+ ## Annotations are mandatory for the load balancer to come up. Varies with the cloud service.
+ internal:
+ enabled: false
+ annotations: {}
+
+ # loadBalancerIP: ""
+
+ ## Restrict access For LoadBalancer service. Defaults to 0.0.0.0/0.
+ loadBalancerSourceRanges: []
+
+ ## Set external traffic policy to: "Local" to preserve source IP on
+ ## providers supporting it
+ ## Ref: https://kubernetes.io/docs/tutorials/services/source-ip/#source-ip-for-services-with-typeloadbalancer
+ # externalTrafficPolicy: ""
+
+ extraContainers: []
+ ## Additional containers to be added to the controller pod.
+ ## See https://github.com/lemonldap-ng-controller/lemonldap-ng-controller as example.
+ # - name: my-sidecar
+ # image: nginx:latest
+ # - name: lemonldap-ng-controller
+ # image: lemonldapng/lemonldap-ng-controller:0.2.0
+ # args:
+ # - /lemonldap-ng-controller
+ # - --alsologtostderr
+ # - --configmap=$(POD_NAMESPACE)/lemonldap-ng-configuration
+ # env:
+ # - name: POD_NAME
+ # valueFrom:
+ # fieldRef:
+ # fieldPath: metadata.name
+ # - name: POD_NAMESPACE
+ # valueFrom:
+ # fieldRef:
+ # fieldPath: metadata.namespace
+ # volumeMounts:
+ # - name: copy-portal-skins
+ # mountPath: /srv/var/lib/lemonldap-ng/portal/skins
+
+ extraVolumeMounts: []
+ ## Additional volumeMounts to the controller main container.
+ # - name: copy-portal-skins
+ # mountPath: /var/lib/lemonldap-ng/portal/skins
+
+ extraVolumes: []
+ ## Additional volumes to the controller pod.
+ # - name: copy-portal-skins
+ # emptyDir: {}
+
+ extraInitContainers: []
+ ## Containers, which are run before the app containers are started.
+ # - name: init-myservice
+ # image: busybox
+ # command: ['sh', '-c', 'until nslookup myservice; do echo waiting for myservice; sleep 2; done;']
+
+ admissionWebhooks:
+ annotations: {}
+ enabled: true
+ failurePolicy: Fail
+ # timeoutSeconds: 10
+ port: 8443
+ certificate: "/usr/local/certificates/cert"
+ key: "/usr/local/certificates/key"
+ namespaceSelector: {}
+ objectSelector: {}
+
+ # Use an existing PSP instead of creating one
+ existingPsp: ""
+
+ service:
+ annotations: {}
+ # clusterIP: ""
+ externalIPs: []
+ # loadBalancerIP: ""
+ loadBalancerSourceRanges: []
+ servicePort: 443
+ type: ClusterIP
+
+ createSecretJob:
+ resources: {}
+ # limits:
+ # cpu: 10m
+ # memory: 20Mi
+ # requests:
+ # cpu: 10m
+ # memory: 20Mi
+
+ patchWebhookJob:
+ resources: {}
+
+ patch:
+ enabled: true
+ image:
+ registry: k8s.gcr.io
+ image: ingress-nginx/kube-webhook-certgen
+ # for backwards compatibility consider setting the full image url via the repository value below
+ # use *either* current default registry/image or repository format or installing chart by providing the values.yaml will fail
+ # repository:
+ tag: v1.0
+ digest: sha256:f3b6b39a6062328c095337b4cadcefd1612348fdd5190b1dcbcb9b9e90bd8068
+ pullPolicy: IfNotPresent
+ ## Provide a priority class name to the webhook patching job
+ ##
+ priorityClassName: ""
+ podAnnotations: {}
+ nodeSelector:
+ kubernetes.io/os: linux
+ tolerations: []
+ runAsUser: 2000
+
+ metrics:
+ port: 10254
+ # if this port is changed, change healthz-port: in extraArgs: accordingly
+ enabled: false
+
+ service:
+ annotations: {}
+ # prometheus.io/scrape: "true"
+ # prometheus.io/port: "10254"
+
+ # clusterIP: ""
+
+ ## List of IP addresses at which the stats-exporter service is available
+ ## Ref: https://kubernetes.io/docs/user-guide/services/#external-ips
+ ##
+ externalIPs: []
+
+ # loadBalancerIP: ""
+ loadBalancerSourceRanges: []
+ servicePort: 10254
+ type: ClusterIP
+ # externalTrafficPolicy: ""
+ # nodePort: ""
+
+ serviceMonitor:
+ enabled: false
+ additionalLabels: {}
+ # The label to use to retrieve the job name from.
+ # jobLabel: "app.kubernetes.io/name"
+ namespace: ""
+ namespaceSelector: {}
+ # Default: scrape .Release.Namespace only
+ # To scrape all, use the following:
+ # namespaceSelector:
+ # any: true
+ scrapeInterval: 30s
+ # honorLabels: true
+ targetLabels: []
+ metricRelabelings: []
+
+ prometheusRule:
+ enabled: false
+ additionalLabels: {}
+ # namespace: ""
+ rules: []
+ # # These are just examples rules, please adapt them to your needs
+ # - alert: NGINXConfigFailed
+ # expr: count(nginx_ingress_controller_config_last_reload_successful == 0) > 0
+ # for: 1s
+ # labels:
+ # severity: critical
+ # annotations:
+ # description: bad ingress config - nginx config test failed
+ # summary: uninstall the latest ingress changes to allow config reloads to resume
+ # - alert: NGINXCertificateExpiry
+ # expr: (avg(nginx_ingress_controller_ssl_expire_time_seconds) by (host) - time()) < 604800
+ # for: 1s
+ # labels:
+ # severity: critical
+ # annotations:
+ # description: ssl certificate(s) will expire in less then a week
+ # summary: renew expiring certificates to avoid downtime
+ # - alert: NGINXTooMany500s
+ # expr: 100 * ( sum( nginx_ingress_controller_requests{status=~"5.+"} ) / sum(nginx_ingress_controller_requests) ) > 5
+ # for: 1m
+ # labels:
+ # severity: warning
+ # annotations:
+ # description: Too many 5XXs
+ # summary: More than 5% of all requests returned 5XX, this requires your attention
+ # - alert: NGINXTooMany400s
+ # expr: 100 * ( sum( nginx_ingress_controller_requests{status=~"4.+"} ) / sum(nginx_ingress_controller_requests) ) > 5
+ # for: 1m
+ # labels:
+ # severity: warning
+ # annotations:
+ # description: Too many 4XXs
+ # summary: More than 5% of all requests returned 4XX, this requires your attention
+
+ ## Improve connection draining when ingress controller pod is deleted using a lifecycle hook:
+ ## With this new hook, we increased the default terminationGracePeriodSeconds from 30 seconds
+ ## to 300, allowing the draining of connections up to five minutes.
+ ## If the active connections end before that, the pod will terminate gracefully at that time.
+ ## To effectively take advantage of this feature, the Configmap feature
+ ## worker-shutdown-timeout new value is 240s instead of 10s.
+ ##
+ lifecycle:
+ preStop:
+ exec:
+ command:
+ - /wait-shutdown
+
+ priorityClassName: ""
+
+## Rollback limit
+##
+revisionHistoryLimit: 10
+
+## Default 404 backend
+##
+defaultBackend:
+ ##
+ enabled: false
+
+ name: defaultbackend
+ image:
+ registry: k8s.gcr.io
+ image: defaultbackend-amd64
+ # for backwards compatibility consider setting the full image url via the repository value below
+ # use *either* current default registry/image or repository format or installing chart by providing the values.yaml will fail
+ # repository:
+ tag: "1.5"
+ pullPolicy: IfNotPresent
+ # nobody user -> uid 65534
+ runAsUser: 65534
+ runAsNonRoot: true
+ readOnlyRootFilesystem: true
+ allowPrivilegeEscalation: false
+
+ # Use an existing PSP instead of creating one
+ existingPsp: ""
+
+ extraArgs: {}
+
+ serviceAccount:
+ create: true
+ name: ""
+ automountServiceAccountToken: true
+ ## Additional environment variables to set for defaultBackend pods
+ extraEnvs: []
+
+ port: 8080
+
+ ## Readiness and liveness probes for default backend
+ ## Ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/
+ ##
+ livenessProbe:
+ failureThreshold: 3
+ initialDelaySeconds: 30
+ periodSeconds: 10
+ successThreshold: 1
+ timeoutSeconds: 5
+ readinessProbe:
+ failureThreshold: 6
+ initialDelaySeconds: 0
+ periodSeconds: 5
+ successThreshold: 1
+ timeoutSeconds: 5
+
+ ## Node tolerations for server scheduling to nodes with taints
+ ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/
+ ##
+ tolerations: []
+ # - key: "key"
+ # operator: "Equal|Exists"
+ # value: "value"
+ # effect: "NoSchedule|PreferNoSchedule|NoExecute(1.6 only)"
+
+ affinity: {}
+
+ ## Security Context policies for controller pods
+ ## See https://kubernetes.io/docs/tasks/administer-cluster/sysctl-cluster/ for
+ ## notes on enabling and using sysctls
+ ##
+ podSecurityContext: {}
+
+ # labels to add to the pod container metadata
+ podLabels: {}
+ # key: value
+
+ ## Node labels for default backend pod assignment
+ ## Ref: https://kubernetes.io/docs/user-guide/node-selection/
+ ##
+ nodeSelector:
+ kubernetes.io/os: linux
+
+ ## Annotations to be added to default backend pods
+ ##
+ podAnnotations: {}
+
+ replicaCount: 1
+
+ minAvailable: 1
+
+ resources: {}
+ # limits:
+ # cpu: 10m
+ # memory: 20Mi
+ # requests:
+ # cpu: 10m
+ # memory: 20Mi
+
+ extraVolumeMounts: []
+ ## Additional volumeMounts to the default backend container.
+ # - name: copy-portal-skins
+ # mountPath: /var/lib/lemonldap-ng/portal/skins
+
+ extraVolumes: []
+ ## Additional volumes to the default backend pod.
+ # - name: copy-portal-skins
+ # emptyDir: {}
+
+ autoscaling:
+ annotations: {}
+ enabled: false
+ minReplicas: 1
+ maxReplicas: 2
+ targetCPUUtilizationPercentage: 50
+ targetMemoryUtilizationPercentage: 50
+
+ service:
+ annotations: {}
+
+ # clusterIP: ""
+
+ ## List of IP addresses at which the default backend service is available
+ ## Ref: https://kubernetes.io/docs/user-guide/services/#external-ips
+ ##
+ externalIPs: []
+
+ # loadBalancerIP: ""
+ loadBalancerSourceRanges: []
+ servicePort: 80
+ type: ClusterIP
+
+ priorityClassName: ""
+
+## Enable RBAC as per https://github.com/kubernetes/ingress-nginx/blob/main/docs/deploy/rbac.md and https://github.com/kubernetes/ingress-nginx/issues/266
+rbac:
+ create: true
+ scope: false
+
+# If true, create & use Pod Security Policy resources
+# https://kubernetes.io/docs/concepts/policy/pod-security-policy/
+podSecurityPolicy:
+ enabled: false
+
+serviceAccount:
+ create: true
+ name: ""
+ automountServiceAccountToken: true
+
+## Optional array of imagePullSecrets containing private registry credentials
+## Ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
+imagePullSecrets: []
+# - name: secretName
+
+# TCP service key:value pairs
+# Ref: https://github.com/kubernetes/ingress-nginx/blob/main/docs/user-guide/exposing-tcp-udp-services.md
+##
+tcp: {}
+# 8080: "default/example-tcp-svc:9000"
+
+# UDP service key:value pairs
+# Ref: https://github.com/kubernetes/ingress-nginx/blob/main/docs/user-guide/exposing-tcp-udp-services.md
+##
+udp: {}
+# 53: "kube-system/kube-dns:53"
+
+# A base64ed Diffie-Hellman parameter
+# This can be generated with: openssl dhparam 4096 2> /dev/null | base64
+# Ref: https://github.com/kubernetes/ingress-nginx/tree/main/docs/examples/customization/ssl-dh-param
+dhParam: