Installer: make vpn ip configurable
diff --git a/charts/auth/templates/lighthouse-config.yaml b/charts/auth/templates/lighthouse-config.yaml
index f4444e0..1318c1a 100644
--- a/charts/auth/templates/lighthouse-config.yaml
+++ b/charts/auth/templates/lighthouse-config.yaml
@@ -5,248 +5,43 @@
namespace: {{ .Release.Namespace }}
data:
lighthouse.yaml: |
- # This is the nebula example configuration file. You must edit, at a minimum, the static_host_map, lighthouse, and firewall sections
- # Some options in this file are HUPable, including the pki section. (A HUP will reload credentials from disk without affecting existing tunnels)
-
- # PKI defines the location of credentials for this node. Each of these can also be inlined by using the yaml ": |" syntax.
pki:
- # The CAs that are accepted by this node. Must contain one or more certificates created by 'nebula-cert ca'
- ##ca: /etc/nebula/ca/ca.crt
ca: /etc/nebula/lighthouse/ca.crt
cert: /etc/nebula/lighthouse/host.crt
key: /etc/nebula/lighthouse/host.key
- #blocklist is a list of certificate fingerprints that we will refuse to talk to
- #blocklist:
- # - c99d4e650533b92061b09918e838a5a0a6aaee21eed1d12fd937682865936c72
-
- # The static host map defines a set of hosts with fixed IP addresses on the internet (or any network).
- # A host can have multiple fixed IP addresses defined here, and nebula will try each when establishing a tunnel.
- # The syntax is:
- # "{nebula ip}": ["{routable ip/dns name}:{routable port}"]
- # Example, if your lighthouse has the nebula IP of 192.168.100.1 and has the real ip address of 100.64.22.11 and runs on port 4243:
static_host_map:
- "{{ .Values.ui.nebula.lighthouse.internalIP }}": ["{{ .Values.ui.nebula.lighthouse.externalIP }}>:{{ .Values.ui.nebula.lighthouse.port }}>"]
-
-
+ "{{ .Values.ui.nebula.lighthouse.internalIP }}": ["{{ .Values.ui.nebula.lighthouse.externalIP }}:{{ .Values.ui.nebula.lighthouse.port }}"]
lighthouse:
- # am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes
- # you have configured to be lighthouses in your network
am_lighthouse: false
- # serve_dns optionally starts a dns listener that responds to various queries and can even be
- # delegated to for resolution
- #serve_dns: false
- #dns:
- # The DNS host defines the IP to bind the dns listener to. This also allows binding to the nebula node IP.
- #host: 0.0.0.0
- #port: 53
- # interval is the number of seconds between updates from this node to a lighthouse.
- # during updates, a node sends information about its current IP addresses to each node.
interval: 60
- # hosts is a list of lighthouse hosts this node should report to and query from
- # IMPORTANT: THIS SHOULD BE EMPTY ON LIGHTHOUSE NODES
- # IMPORTANT2: THIS SHOULD BE LIGHTHOUSES' NEBULA IPs, NOT LIGHTHOUSES' REAL ROUTABLE IPs
hosts:
- {{ .Values.ui.nebula.lighthouse.internalIP }}
-
- # remote_allow_list allows you to control ip ranges that this node will
- # consider when handshaking to another node. By default, any remote IPs are
- # allowed. You can provide CIDRs here with `true` to allow and `false` to
- # deny. The most specific CIDR rule applies to each remote. If all rules are
- # "allow", the default will be "deny", and vice-versa. If both "allow" and
- # "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the
- # default.
- #remote_allow_list:
- # Example to block IPs from this subnet from being used for remote IPs.
- #"172.16.0.0/12": false
-
- # A more complicated example, allow public IPs but only private IPs from a specific subnet
- #"0.0.0.0/0": true
- #"10.0.0.0/8": false
- #"10.42.42.0/24": true
-
- # local_allow_list allows you to filter which local IP addresses we advertise
- # to the lighthouses. This uses the same logic as `remote_allow_list`, but
- # additionally, you can specify an `interfaces` map of regular expressions
- # to match against interface names. The regexp must match the entire name.
- # All interface rules must be either true or false (and the default will be
- # the inverse). CIDR rules are matched after interface name rules.
- # Default is all local IP addresses.
- #local_allow_list:
- # Example to block tun0 and all docker interfaces.
- #interfaces:
- #tun0: false
- #'docker.*': false
- # Example to only advertise this subnet to the lighthouse.
- #"10.0.0.0/8": true
-
- # Port Nebula will be listening on. The default here is 4243. For a lighthouse node, the port should be defined,
- # however using port 0 will dynamically assign a port and is recommended for roaming nodes.
listen:
- # To listen on both any ipv4 and ipv6 use "[::]"
host: "[::]"
- port: 4243
- # Sets the max number of packets to pull from the kernel for each syscall (under systems that support recvmmsg)
- # default is 64, does not support reload
- #batch: 64
- # Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel
- # Default is net.core.rmem_default and net.core.wmem_default (/proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_default)
- # Maximum is limited by memory in the system, SO_RCVBUFFORCE and SO_SNDBUFFORCE is used to avoid having to raise the system wide
- # max, net.core.rmem_max and net.core.wmem_max
- #read_buffer: 10485760
- #write_buffer: 10485760
-
- # EXPERIMENTAL: This option is currently only supported on linux and may
- # change in future minor releases.
- #
- # Routines is the number of thread pairs to run that consume from the tun and UDP queues.
- # Currently, this defaults to 1 which means we have 1 tun queue reader and 1
- # UDP queue reader. Setting this above one will set IFF_MULTI_QUEUE on the tun
- # device and SO_REUSEPORT on the UDP socket to allow multiple queues.
- #routines: 1
-
+ port: 4242
punchy:
- # Continues to punch inbound/outbound at a regular interval to avoid expiration of firewall nat mappings
punch: true
-
- # respond means that a node you are trying to reach will connect back out to you if your hole punching fails
- # this is extremely useful if one node is behind a difficult nat, such as a symmetric NAT
- # Default is false
- #respond: true
-
- # delays a punch response for misbehaving NATs, default is 1 second, respond must be true to take effect
- #delay: 1s
-
- # Cipher allows you to choose between the available ciphers for your network. Options are chachapoly or aes
- # IMPORTANT: this value must be identical on ALL NODES/LIGHTHOUSES. We do not/will not support use of different ciphers simultaneously!
cipher: chachapoly
-
- # Local range is used to define a hint about the local network range, which speeds up discovering the fastest
- # path to a network adjacent nebula node.
- #local_range: "172.16.0.0/24"
-
- # sshd can expose informational and administrative functions via ssh this is a
- #sshd:
- # Toggles the feature
- #enabled: true
- # Host and port to listen on, port 22 is not allowed for your safety
- #listen: 127.0.0.1:2222
- # A file containing the ssh host private key to use
- # A decent way to generate one: ssh-keygen -t ed25519 -f ssh_host_ed25519_key -N "" < /dev/null
- #host_key: ./ssh_host_ed25519_key
- # A file containing a list of authorized public keys
- #authorized_users:
- #- user: steeeeve
- # keys can be an array of strings or single string
- #keys:
- #- "ssh public key string"
-
- # Configure the private interface. Note: addr is baked into the nebula certificate
tun:
- # When tun is disabled, a lighthouse can be started without a local tun interface (and therefore without root)
disabled: false
- # Name of the device
dev: nebula1
- # Toggles forwarding of local broadcast packets, the address of which depends on the ip/mask encoded in pki.cert
drop_local_broadcast: false
- # Toggles forwarding of multicast packets
drop_multicast: false
- # Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 500
tx_queue: 500
- # Default MTU for every packet, safe setting is (and the default) 1300 for internet based traffic
mtu: 1300
- # Route based MTU overrides, you have known vpn ip paths that can support larger MTUs you can increase/decrease them here
- routes:
- #- mtu: 8800
- # route: 10.0.0.0/16
- # Unsafe routes allows you to route traffic over nebula to non-nebula nodes
- # Unsafe routes should be avoided unless you have hosts/services that cannot run nebula
- # NOTE: The nebula certificate of the "via" node *MUST* have the "route" defined as a subnet in its certificate
- unsafe_routes:
- #- route: 172.16.1.0/24
- # via: 192.168.100.99
- # mtu: 1300 #mtu will default to tun mtu if this option is not sepcified
-
-
- # TODO
- # Configure logging level
logging:
- # panic, fatal, error, warning, info, or debug. Default is info
level: info
- # json or text formats currently available. Default is text
format: text
- # Disable timestamp logging. useful when output is redirected to logging system that already adds timestamps. Default is false
- #disable_timestamp: true
- # timestamp format is specified in Go time format, see:
- # https://golang.org/pkg/time/#pkg-constants
- # default when `format: json`: "2006-01-02T15:04:05Z07:00" (RFC3339)
- # default when `format: text`:
- # when TTY attached: seconds since beginning of execution
- # otherwise: "2006-01-02T15:04:05Z07:00" (RFC3339)
- # As an example, to log as RFC3339 with millisecond precision, set to:
- #timestamp_format: "2006-01-02T15:04:05.000Z07:00"
-
- #stats:
- #type: graphite
- #prefix: nebula
- #protocol: tcp
- #host: 127.0.0.1:9999
- #interval: 10s
-
- #type: prometheus
- #listen: 127.0.0.1:8080
- #path: /metrics
- #namespace: prometheusns
- #subsystem: nebula
- #interval: 10s
-
- # enables counter metrics for meta packets
- # e.g.: `messages.tx.handshake`
- # NOTE: `message.{tx,rx}.recv_error` is always emitted
- #message_metrics: false
-
- # enables detailed counter metrics for lighthouse packets
- # e.g.: `lighthouse.rx.HostQuery`
- #lighthouse_metrics: false
-
- # Handshake Manager Settings
- #handshakes:
- # Handshakes are sent to all known addresses at each interval with a linear backoff,
- # Wait try_interval after the 1st attempt, 2 * try_interval after the 2nd, etc, until the handshake is older than timeout
- # A 100ms interval with the default 10 retries will give a handshake 5.5 seconds to resolve before timing out
- #try_interval: 100ms
- #retries: 20
- # trigger_buffer is the size of the buffer channel for quickly sending handshakes
- # after receiving the response for lighthouse queries
- #trigger_buffer: 64
-
-
- # Nebula security group configuration
firewall:
conntrack:
tcp_timeout: 12m
udp_timeout: 3m
default_timeout: 10m
max_connections: 100000
-
- # The firewall is default deny. There is no way to write a deny rule.
- # Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
- # Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr)
- # - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
- # code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any`
- # proto: `any`, `tcp`, `udp`, or `icmp`
- # host: `any` or a literal hostname, ie `test-host`
- # group: `any` or a literal group name, ie `default-group`
- # groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass
- # cidr: a CIDR, `0.0.0.0/0` is any.
- # ca_name: An issuing CA name
- # ca_sha: An issuing CA shasum
-
outbound:
- # Allow all outbound traffic from this node
- port: any
proto: any
host: any
-
inbound:
- port: any
proto: any
diff --git a/charts/auth/templates/ui.yaml b/charts/auth/templates/ui.yaml
index 8936f4d..ad31ccb 100644
--- a/charts/auth/templates/ui.yaml
+++ b/charts/auth/templates/ui.yaml
@@ -50,6 +50,8 @@
metadata:
labels:
app: ui
+ annotations:
+ checksum/config: {{ include (print $.Template.BasePath "/lighthouse-config.yaml") . | sha256sum }}
spec:
volumes:
- name: cert
diff --git a/charts/vpn-mesh-config/lighthouse.yaml b/charts/vpn-mesh-config/lighthouse.yaml
deleted file mode 100644
index cf106b5..0000000
--- a/charts/vpn-mesh-config/lighthouse.yaml
+++ /dev/null
@@ -1,246 +0,0 @@
-# This is the nebula example configuration file. You must edit, at a minimum, the static_host_map, lighthouse, and firewall sections
-# Some options in this file are HUPable, including the pki section. (A HUP will reload credentials from disk without affecting existing tunnels)
-
-# PKI defines the location of credentials for this node. Each of these can also be inlined by using the yaml ": |" syntax.
-pki:
- # The CAs that are accepted by this node. Must contain one or more certificates created by 'nebula-cert ca'
- ##ca: /etc/nebula/ca/ca.crt
- ca: /etc/nebula/lighthouse/ca.crt
- cert: /etc/nebula/lighthouse/host.crt
- key: /etc/nebula/lighthouse/host.key
- #blocklist is a list of certificate fingerprints that we will refuse to talk to
- #blocklist:
- # - c99d4e650533b92061b09918e838a5a0a6aaee21eed1d12fd937682865936c72
-
-# The static host map defines a set of hosts with fixed IP addresses on the internet (or any network).
-# A host can have multiple fixed IP addresses defined here, and nebula will try each when establishing a tunnel.
-# The syntax is:
-# "{nebula ip}": ["{routable ip/dns name}:{routable port}"]
-# Example, if your lighthouse has the nebula IP of 192.168.100.1 and has the real ip address of 100.64.22.11 and runs on port 4243:
-static_host_map:
- "<INTERNAL_IP>": ["<EXTERNAL_IP>:<PORT>"]
-
-
-lighthouse:
- # am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes
- # you have configured to be lighthouses in your network
- am_lighthouse: true
- # serve_dns optionally starts a dns listener that responds to various queries and can even be
- # delegated to for resolution
- #serve_dns: false
- #dns:
- # The DNS host defines the IP to bind the dns listener to. This also allows binding to the nebula node IP.
- #host: 0.0.0.0
- #port: 53
- # interval is the number of seconds between updates from this node to a lighthouse.
- # during updates, a node sends information about its current IP addresses to each node.
- interval: 60
- # hosts is a list of lighthouse hosts this node should report to and query from
- # IMPORTANT: THIS SHOULD BE EMPTY ON LIGHTHOUSE NODES
- # IMPORTANT2: THIS SHOULD BE LIGHTHOUSES' NEBULA IPs, NOT LIGHTHOUSES' REAL ROUTABLE IPs
- hosts:
- # - "111.0.0.1"
-
- # remote_allow_list allows you to control ip ranges that this node will
- # consider when handshaking to another node. By default, any remote IPs are
- # allowed. You can provide CIDRs here with `true` to allow and `false` to
- # deny. The most specific CIDR rule applies to each remote. If all rules are
- # "allow", the default will be "deny", and vice-versa. If both "allow" and
- # "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the
- # default.
- #remote_allow_list:
- # Example to block IPs from this subnet from being used for remote IPs.
- #"172.16.0.0/12": false
-
- # A more complicated example, allow public IPs but only private IPs from a specific subnet
- #"0.0.0.0/0": true
- #"10.0.0.0/8": false
- #"10.42.42.0/24": true
-
- # local_allow_list allows you to filter which local IP addresses we advertise
- # to the lighthouses. This uses the same logic as `remote_allow_list`, but
- # additionally, you can specify an `interfaces` map of regular expressions
- # to match against interface names. The regexp must match the entire name.
- # All interface rules must be either true or false (and the default will be
- # the inverse). CIDR rules are matched after interface name rules.
- # Default is all local IP addresses.
- #local_allow_list:
- # Example to block tun0 and all docker interfaces.
- #interfaces:
- #tun0: false
- #'docker.*': false
- # Example to only advertise this subnet to the lighthouse.
- #"10.0.0.0/8": true
-
-# Port Nebula will be listening on. The default here is 4243. For a lighthouse node, the port should be defined,
-# however using port 0 will dynamically assign a port and is recommended for roaming nodes.
-listen:
- # To listen on both any ipv4 and ipv6 use "[::]"
- host: "[::]"
- port: <PORT>
- # Sets the max number of packets to pull from the kernel for each syscall (under systems that support recvmmsg)
- # default is 64, does not support reload
- #batch: 64
- # Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel
- # Default is net.core.rmem_default and net.core.wmem_default (/proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_default)
- # Maximum is limited by memory in the system, SO_RCVBUFFORCE and SO_SNDBUFFORCE is used to avoid having to raise the system wide
- # max, net.core.rmem_max and net.core.wmem_max
- #read_buffer: 10485760
- #write_buffer: 10485760
-
-# EXPERIMENTAL: This option is currently only supported on linux and may
-# change in future minor releases.
-#
-# Routines is the number of thread pairs to run that consume from the tun and UDP queues.
-# Currently, this defaults to 1 which means we have 1 tun queue reader and 1
-# UDP queue reader. Setting this above one will set IFF_MULTI_QUEUE on the tun
-# device and SO_REUSEPORT on the UDP socket to allow multiple queues.
-#routines: 1
-
-punchy:
- # Continues to punch inbound/outbound at a regular interval to avoid expiration of firewall nat mappings
- punch: true
-
- # respond means that a node you are trying to reach will connect back out to you if your hole punching fails
- # this is extremely useful if one node is behind a difficult nat, such as a symmetric NAT
- # Default is false
- #respond: true
-
- # delays a punch response for misbehaving NATs, default is 1 second, respond must be true to take effect
- #delay: 1s
-
-# Cipher allows you to choose between the available ciphers for your network. Options are chachapoly or aes
-# IMPORTANT: this value must be identical on ALL NODES/LIGHTHOUSES. We do not/will not support use of different ciphers simultaneously!
-cipher: chachapoly
-
-# Local range is used to define a hint about the local network range, which speeds up discovering the fastest
-# path to a network adjacent nebula node.
-#local_range: "172.16.0.0/24"
-
-# sshd can expose informational and administrative functions via ssh this is a
-#sshd:
- # Toggles the feature
- #enabled: true
- # Host and port to listen on, port 22 is not allowed for your safety
- #listen: 127.0.0.1:2222
- # A file containing the ssh host private key to use
- # A decent way to generate one: ssh-keygen -t ed25519 -f ssh_host_ed25519_key -N "" < /dev/null
- #host_key: ./ssh_host_ed25519_key
- # A file containing a list of authorized public keys
- #authorized_users:
- #- user: steeeeve
- # keys can be an array of strings or single string
- #keys:
- #- "ssh public key string"
-
-# Configure the private interface. Note: addr is baked into the nebula certificate
-tun:
- # When tun is disabled, a lighthouse can be started without a local tun interface (and therefore without root)
- disabled: false
- # Name of the device
- dev: nebula1
- # Toggles forwarding of local broadcast packets, the address of which depends on the ip/mask encoded in pki.cert
- drop_local_broadcast: false
- # Toggles forwarding of multicast packets
- drop_multicast: false
- # Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 500
- tx_queue: 500
- # Default MTU for every packet, safe setting is (and the default) 1300 for internet based traffic
- mtu: 1300
- # Route based MTU overrides, you have known vpn ip paths that can support larger MTUs you can increase/decrease them here
- routes:
- #- mtu: 8800
- # route: 10.0.0.0/16
- # Unsafe routes allows you to route traffic over nebula to non-nebula nodes
- # Unsafe routes should be avoided unless you have hosts/services that cannot run nebula
- # NOTE: The nebula certificate of the "via" node *MUST* have the "route" defined as a subnet in its certificate
- unsafe_routes:
- #- route: 172.16.1.0/24
- # via: 192.168.100.99
- # mtu: 1300 #mtu will default to tun mtu if this option is not sepcified
-
-
-# TODO
-# Configure logging level
-logging:
- # panic, fatal, error, warning, info, or debug. Default is info
- level: info
- # json or text formats currently available. Default is text
- format: text
- # Disable timestamp logging. useful when output is redirected to logging system that already adds timestamps. Default is false
- #disable_timestamp: true
- # timestamp format is specified in Go time format, see:
- # https://golang.org/pkg/time/#pkg-constants
- # default when `format: json`: "2006-01-02T15:04:05Z07:00" (RFC3339)
- # default when `format: text`:
- # when TTY attached: seconds since beginning of execution
- # otherwise: "2006-01-02T15:04:05Z07:00" (RFC3339)
- # As an example, to log as RFC3339 with millisecond precision, set to:
- #timestamp_format: "2006-01-02T15:04:05.000Z07:00"
-
-#stats:
- #type: graphite
- #prefix: nebula
- #protocol: tcp
- #host: 127.0.0.1:9999
- #interval: 10s
-
- #type: prometheus
- #listen: 127.0.0.1:8080
- #path: /metrics
- #namespace: prometheusns
- #subsystem: nebula
- #interval: 10s
-
- # enables counter metrics for meta packets
- # e.g.: `messages.tx.handshake`
- # NOTE: `message.{tx,rx}.recv_error` is always emitted
- #message_metrics: false
-
- # enables detailed counter metrics for lighthouse packets
- # e.g.: `lighthouse.rx.HostQuery`
- #lighthouse_metrics: false
-
-# Handshake Manager Settings
-#handshakes:
- # Handshakes are sent to all known addresses at each interval with a linear backoff,
- # Wait try_interval after the 1st attempt, 2 * try_interval after the 2nd, etc, until the handshake is older than timeout
- # A 100ms interval with the default 10 retries will give a handshake 5.5 seconds to resolve before timing out
- #try_interval: 100ms
- #retries: 20
- # trigger_buffer is the size of the buffer channel for quickly sending handshakes
- # after receiving the response for lighthouse queries
- #trigger_buffer: 64
-
-
-# Nebula security group configuration
-firewall:
- conntrack:
- tcp_timeout: 12m
- udp_timeout: 3m
- default_timeout: 10m
- max_connections: 100000
-
- # The firewall is default deny. There is no way to write a deny rule.
- # Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
- # Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr)
- # - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
- # code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any`
- # proto: `any`, `tcp`, `udp`, or `icmp`
- # host: `any` or a literal hostname, ie `test-host`
- # group: `any` or a literal group name, ie `default-group`
- # groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass
- # cidr: a CIDR, `0.0.0.0/0` is any.
- # ca_name: An issuing CA name
- # ca_sha: An issuing CA shasum
-
- outbound:
- # Allow all outbound traffic from this node
- - port: any
- proto: any
- host: any
-
- inbound:
- - port: any
- proto: any
- host: any
diff --git a/charts/vpn-mesh-config/templates/lighthouse-config.yaml b/charts/vpn-mesh-config/templates/lighthouse-config.yaml
index b318546..7ce6c0a 100644
--- a/charts/vpn-mesh-config/templates/lighthouse-config.yaml
+++ b/charts/vpn-mesh-config/templates/lighthouse-config.yaml
@@ -4,4 +4,43 @@
name: lighthouse-config
namespace: {{ .Release.Namespace }}
data:
-{{ (.Files.Glob "lighthouse.yaml").AsConfig | replace "<INTERNAL_IP>" .Values.lighthouse.internalIP | replace "<EXTERNAL_IP>" .Values.lighthouse.externalIP | replace "<PORT>" .Values.lighthouse.port | indent 2 }}
+ lighthouse.yaml: |
+ pki:
+ ca: /etc/nebula/lighthouse/ca.crt
+ cert: /etc/nebula/lighthouse/host.crt
+ key: /etc/nebula/lighthouse/host.key
+ static_host_map:
+ "{{ .Values.lighthouse.internalIP }}": ["{{ .Values.lighthouse.externalIP }}:{{ .Values.lighthouse.port }}"]
+ lighthouse:
+ am_lighthouse: true
+ interval: 60
+ listen:
+ host: "[::]"
+ port: {{ .Values.lighthouse.port }}
+ punchy:
+ punch: true
+ cipher: chachapoly
+ tun:
+ disabled: false
+ dev: nebula1
+ drop_local_broadcast: false
+ drop_multicast: false
+ tx_queue: 500
+ mtu: 1300
+ logging:
+ level: info
+ format: text
+ firewall:
+ conntrack:
+ tcp_timeout: 12m
+ udp_timeout: 3m
+ default_timeout: 10m
+ max_connections: 100000
+ outbound:
+ - port: any
+ proto: any
+ host: any
+ inbound:
+ - port: any
+ proto: any
+ host: any