diff --git a/scripts/network-config b/scripts/network-config
new file mode 100644
index 0000000..bfd94c5
--- /dev/null
+++ b/scripts/network-config
@@ -0,0 +1,22 @@
+# This file contains a netplan-compatible configuration which cloud-init
+# will apply on first-boot. Please refer to the cloud-init documentation and
+# the netplan reference for full details:
+#
+# https://cloudinit.readthedocs.io/
+# https://netplan.io/reference
+#
+# Some additional examples are commented out below
+
+network:
+    version: 2
+    ethernets:
+        eth0:
+            dhcp4: true
+            optional: true
+    wifis:
+        wlan0:
+            optional: true
+            dhcp4: true
+            access-points:
+                "SSID":
+                    password: "PSSWD"
diff --git a/scripts/raspberry-pi.sh b/scripts/raspberry-pi.sh
new file mode 100644
index 0000000..3743ca1
--- /dev/null
+++ b/scripts/raspberry-pi.sh
@@ -0,0 +1,44 @@
+### Ubuntu 18.04 https://dev.to/wesleybatista/setup-raspberry-pi-3-model-b-with-ubuntu-server-and-ssh-over-wifi-4d41
+
+### setup rpi connectivity
+## enable wifi and ssh
+# host
+# set ssid/psswd in wpa_suplicant.conf/network-config
+# Raspbian - cp wpa_supplicant.conf /Volumes/boot/
+# Ubuntu - sudoedit /etc/netplan/50-cloud-init.yaml and copy network-config into it
+touch /Volumes/boot/ssh
+## attach rpi to ip address
+# sudo add rpi to /etc/hosts
+
+
+
+### k3s
+## create pcloud sudo user
+# rpi
+sudo adduser pcloud
+sudo usermod -aG sudo pcloud
+sudoedit /boot/firmware/cmdline.txt # append cgroup_memory=1 cgroup_enable=memory
+sudo shutdown -r now
+## install k3s without traefik
+# pcloud@rpi
+curl -sfL https://get.k3s.io | INSTALL_K3S_EXEC="server --no-deploy traefik" K3S_KUBECONFIG_MODE="644" sh
+## copy kubeconfig on host
+# pcloud@rpi
+sudo chown pcloud /etc/rancher/k3s/k3s.yaml
+# host
+scp pcloud@rpi:/etc/rancher/k3s/k3s.yaml ~/.k3s.kubeconfig
+sed -i -e 's/127\.0\.0\.1/rpi/g' ~/.k3s.kubeconfig
+printf "\n\n#k3s kubeconfig\nexport KUBECONFIG=~/.k3s.kubeconfig\n" >> ~/.bash_profile
+source ~/.bash_profile
+kubectl get pods -A
+
+
+
+### ingress
+## traefik 2.0
+helm repo add traefik https://containous.github.io/traefik-helm-chart
+helm repo update
+kubectl create namespace traefik
+helm --namespace=traefik install traefik traefik/traefik \
+     --set additionalArguments="{--providers.kubernetesingress,--global.checknewversion=true}" \
+     --set ports.traefik.expose=True
diff --git a/scripts/wpa_supplicant.conf b/scripts/wpa_supplicant.conf
new file mode 100644
index 0000000..ea5f403
--- /dev/null
+++ b/scripts/wpa_supplicant.conf
@@ -0,0 +1,8 @@
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
+update_config=1
+country=GE
+
+network={
+ ssid="SSID"
+ psk="PSSWD"
+}
\ No newline at end of file