diff --git a/core/auth/hydra/Dockerfile b/core/auth/hydra/Dockerfile
new file mode 100644
index 0000000..96ec8fa
--- /dev/null
+++ b/core/auth/hydra/Dockerfile
@@ -0,0 +1,24 @@
+FROM alpine:3.14.2
+
+RUN addgroup -S ory; \
+    adduser -S ory -G ory -D -u 10000 -h /home/ory -s /bin/nologin; \
+    chown -R ory:ory /home/ory
+
+RUN apk add -U --no-cache ca-certificates
+
+WORKDIR /downloads
+RUN wget https://github.com/ory/hydra/releases/download/v1.10.6/hydra_1.10.6_linux_arm64.tar.gz -O hydra.tar.gz
+RUN tar -xvf hydra.tar.gz
+RUN mv hydra /usr/bin
+
+VOLUME /home/ory
+WORKDIR /home/ory
+RUN rm -r /downloads
+
+# Declare the standard ports used by Hydra (4433 for public service endpoint, 4434 for admin service endpoint)
+EXPOSE 4433 4434
+
+USER 10000
+
+ENTRYPOINT ["hydra"]
+CMD ["serve"]
diff --git a/core/auth/hydra/Makefile b/core/auth/hydra/Makefile
new file mode 100644
index 0000000..232a7d7
--- /dev/null
+++ b/core/auth/hydra/Makefile
@@ -0,0 +1,5 @@
+image_arm64:
+	docker build --tag=giolekva/ory-hydra:latest .
+
+push_arm64: image_arm64
+	docker push giolekva/ory-hydra:latest
diff --git a/core/auth/hydra/hydra.yaml b/core/auth/hydra/hydra.yaml
new file mode 100644
index 0000000..a650e39
--- /dev/null
+++ b/core/auth/hydra/hydra.yaml
@@ -0,0 +1,56 @@
+version: v1.10.6
+
+dsn: postgres://postgres:psswd@postgres:5432/hydra?sslmode=disable&max_conns=20&max_idle_conns=4
+
+serve:
+  cookies:
+    same_site_mode: None
+  public:
+    cors:
+      enabled: true
+      debug: true
+      allow_credentials: true
+      allowed_origins:
+        - https://lekva.me
+        - https://*.lekva.me
+  admin:
+    # host: localhost
+    cors:
+      allowed_origins:
+        - https://hydra.pcloud
+    tls:
+      allow_termination_from:
+        - 0.0.0.0/0
+        - 10.42.0.0/16
+        - 10.43.0.0/16
+        - 111.0.0.1/32
+  tls:
+    allow_termination_from:
+      - 0.0.0.0/0
+      - 10.42.0.0/16
+      - 10.43.0.0/16
+      - 111.0.0.1/32
+
+urls:
+  self:
+    public: https://hydra.lekva.me
+    issuer: https://hydra.lekva.me
+  consent: https://accounts-ui.lekva.me/consent
+  login: https://accounts-ui.lekva.me/login
+  logout: https://accounts-ui.lekva.me/logout
+
+secrets:
+  system:
+    - youReallyNeedToChangeThis
+
+oidc:
+  subject_identifiers:
+    supported_types:
+      - pairwise
+      - public
+    pairwise:
+      salt: youReallyNeedToChangeThis
+
+log:
+  level: trace
+  leak_sensitive_values: true
diff --git a/core/auth/hydra/install.yaml b/core/auth/hydra/install.yaml
new file mode 100644
index 0000000..b9a8d4d
--- /dev/null
+++ b/core/auth/hydra/install.yaml
@@ -0,0 +1,161 @@
+---
+apiVersion: v1
+kind: Namespace
+metadata:
+  name: core-auth
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: hydra
+  namespace: core-auth
+spec:
+  type: ClusterIP
+  selector:
+    app: hydra
+  ports:
+  - name: public
+    port: 80
+    targetPort: public
+    protocol: TCP
+  - name: admin
+    port: 81
+    targetPort: admin
+    protocol: TCP
+---
+apiVersion: networking.k8s.io/v1
+kind: Ingress
+metadata:
+  name: ingress-hydra-public
+  namespace: core-auth
+  annotations:
+    cert-manager.io/cluster-issuer: "letsencrypt-prod"
+    acme.cert-manager.io/http01-edit-in-place: "true"
+spec:
+  ingressClassName: nginx
+  tls:
+  - hosts:
+    - hydra.lekva.me
+    secretName: cert-hydra.lekva.me
+  rules:
+  - host: hydra.lekva.me
+    http:
+      paths:
+      - path: /
+        pathType: Prefix
+        backend:
+          service:
+            name: hydra
+            port:
+              name: public
+---
+apiVersion: networking.k8s.io/v1
+kind: Ingress
+metadata:
+  name: ingress-hydra-private
+  namespace: core-auth
+  annotations:
+    cert-manager.io/cluster-issuer: "selfsigned-ca"
+    acme.cert-manager.io/http01-edit-in-place: "true"
+spec:
+  ingressClassName: nginx-private
+  tls:
+  - hosts:
+    - hydra.pcloud
+    secretName: cert-hydra.pcloud
+  rules:
+  - host: hydra.pcloud
+    http:
+      paths:
+      - path: /
+        pathType: Prefix
+        backend:
+          service:
+            name: hydra
+            port:
+              name: admin
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: hydra
+  namespace: core-auth
+spec:
+  selector:
+    matchLabels:
+      app: hydra
+  replicas: 1
+  template:
+    metadata:
+      labels:
+        app: hydra
+    spec:
+      volumes:
+      - name: config
+        configMap:
+          name: hydra
+      containers:
+      - name: hydra
+        image: giolekva/ory-hydra:latest
+        imagePullPolicy: IfNotPresent
+        ports:
+        - name: public
+          containerPort: 4444
+          protocol: TCP
+        - name: admin
+          containerPort: 4445
+          protocol: TCP
+        command:
+        - "hydra"
+        - "--config=/etc/hydra/config/hydra.yaml"
+        - "serve"
+        - "all"
+        #command: ["hydra", "serve"]
+        # resources:
+        #   requests:
+        #     memory: "10Mi"
+        #     cpu: "10m"
+        #   limits:
+        #     memory: "20Mi"
+        #     cpu: "100m"
+        volumeMounts:
+        - name: config
+          mountPath: /etc/hydra/config
+---
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: hydra-migrate
+  namespace: core-auth
+spec:
+  template:
+    metadata:
+      labels:
+        app: hydra-migrate
+    spec:
+      restartPolicy: OnFailure
+      volumes:
+      - name: config
+        configMap:
+          name: hydra
+      containers:
+      - name: hydra
+        image: giolekva/ory-hydra:latest
+        imagePullPolicy: IfNotPresent
+        command:
+        - "hydra"
+        - "migrate"
+        - "sql"
+        - "-y"
+        - "postgres://postgres:psswd@postgres:5432/hydra?sslmode=disable&max_conns=20&max_idle_conns=4"
+        #command: ["hydra", "serve"]
+        # resources:
+        #   requests:
+        #     memory: "10Mi"
+        #     cpu: "10m"
+        #   limits:
+        #     memory: "20Mi"
+        #     cpu: "100m"
+        volumeMounts:
+        - name: config
+          mountPath: /etc/hydra/config
diff --git a/core/auth/ui/.gitignore b/core/auth/ui/.gitignore
new file mode 100644
index 0000000..254defd
--- /dev/null
+++ b/core/auth/ui/.gitignore
@@ -0,0 +1 @@
+server
diff --git a/core/auth/ui/Makefile b/core/auth/ui/Makefile
index c444c97..70bf15c 100644
--- a/core/auth/ui/Makefile
+++ b/core/auth/ui/Makefile
@@ -5,7 +5,7 @@
 	rm -f server
 
 image: clean build
-	docker build --tag=giolekva/auth-ui .
+	docker build --tag=giolekva/auth-ui . --platform=linux/arm64
 
 push: image
 	docker push giolekva/auth-ui:latest
diff --git a/core/auth/ui/install.yaml b/core/auth/ui/install.yaml
index ec82b9a..35ee23a 100644
--- a/core/auth/ui/install.yaml
+++ b/core/auth/ui/install.yaml
@@ -60,9 +60,19 @@
       labels:
         app: kratos-selfservice-ui
     spec:
+      volumes:
+      - name: cert
+        secret:
+          secretName: node-auth-ui-cert
+      - name: config
+        configMap:
+          name: auth-ui-lighthouse-config
+      hostAliases:
+      - ip: "111.0.0.1"
+        hostnames:
+          - "hydra.pcloud"
       containers:
       - name: server
-        # image: giolekva/ory-kratos-selfservice-ui:latest
         image: giolekva/auth-ui:latest
         imagePullPolicy: Always
         env:
@@ -80,3 +90,33 @@
         #   limits:
         #     memory: "20Mi"
         #     cpu: "100m"
+      - name: lighthouse
+        image: giolekva/nebula:latest
+        imagePullPolicy: IfNotPresent
+        securityContext:
+          capabilities:
+            add: ["NET_ADMIN"]
+          privileged: true
+        ports:
+        - name: lighthouse
+          containerPort: 4247
+          protocol: UDP
+        command: ["nebula", "--config=/etc/nebula/config/lighthouse.yaml"]
+        volumeMounts:
+        - name: cert
+          mountPath: /etc/nebula/lighthouse
+          readOnly: true
+        - name: config
+          mountPath: /etc/nebula/config
+          readOnly: true
+---
+apiVersion: lekva.me/v1
+kind: NebulaNode
+metadata:
+  name: auth-ui
+  namespace: core-auth
+spec:
+  caName: pcloud
+  caNamespace: ingress-nginx-private
+  ipCidr: "111.0.0.10/24"
+  secretName: node-auth-ui-cert
diff --git a/core/auth/ui/lighthouse.yaml b/core/auth/ui/lighthouse.yaml
new file mode 100644
index 0000000..7b6ad10
--- /dev/null
+++ b/core/auth/ui/lighthouse.yaml
@@ -0,0 +1,246 @@
+# This is the nebula example configuration file. You must edit, at a minimum, the static_host_map, lighthouse, and firewall sections
+# Some options in this file are HUPable, including the pki section. (A HUP will reload credentials from disk without affecting existing tunnels)
+
+# PKI defines the location of credentials for this node. Each of these can also be inlined by using the yaml ": |" syntax.
+pki:
+  # The CAs that are accepted by this node. Must contain one or more certificates created by 'nebula-cert ca'
+  ##ca: /etc/nebula/ca/ca.crt
+  ca: /etc/nebula/lighthouse/ca.crt
+  cert: /etc/nebula/lighthouse/host.crt
+  key: /etc/nebula/lighthouse/host.key
+  #blocklist is a list of certificate fingerprints that we will refuse to talk to
+  #blocklist:
+  #  - c99d4e650533b92061b09918e838a5a0a6aaee21eed1d12fd937682865936c72
+
+# The static host map defines a set of hosts with fixed IP addresses on the internet (or any network).
+# A host can have multiple fixed IP addresses defined here, and nebula will try each when establishing a tunnel.
+# The syntax is:
+#   "{nebula ip}": ["{routable ip/dns name}:{routable port}"]
+# Example, if your lighthouse has the nebula IP of 192.168.100.1 and has the real ip address of 100.64.22.11 and runs on port 4242:
+static_host_map:
+  "111.0.0.1": ["46.49.35.44:4242"]
+
+
+lighthouse:
+  # am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes
+  # you have configured to be lighthouses in your network
+  am_lighthouse: false
+  # serve_dns optionally starts a dns listener that responds to various queries and can even be
+  # delegated to for resolution
+  #serve_dns: false
+  #dns:
+    # The DNS host defines the IP to bind the dns listener to. This also allows binding to the nebula node IP.
+    #host: 0.0.0.0
+    #port: 53
+  # interval is the number of seconds between updates from this node to a lighthouse.
+  # during updates, a node sends information about its current IP addresses to each node.
+  interval: 60
+  # hosts is a list of lighthouse hosts this node should report to and query from
+  # IMPORTANT: THIS SHOULD BE EMPTY ON LIGHTHOUSE NODES
+  # IMPORTANT2: THIS SHOULD BE LIGHTHOUSES' NEBULA IPs, NOT LIGHTHOUSES' REAL ROUTABLE IPs
+  hosts:
+    - "111.0.0.1"
+
+  # remote_allow_list allows you to control ip ranges that this node will
+  # consider when handshaking to another node. By default, any remote IPs are
+  # allowed. You can provide CIDRs here with `true` to allow and `false` to
+  # deny. The most specific CIDR rule applies to each remote. If all rules are
+  # "allow", the default will be "deny", and vice-versa. If both "allow" and
+  # "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the
+  # default.
+  #remote_allow_list:
+    # Example to block IPs from this subnet from being used for remote IPs.
+    #"172.16.0.0/12": false
+
+    # A more complicated example, allow public IPs but only private IPs from a specific subnet
+    #"0.0.0.0/0": true
+    #"10.0.0.0/8": false
+    #"10.42.42.0/24": true
+
+  # local_allow_list allows you to filter which local IP addresses we advertise
+  # to the lighthouses. This uses the same logic as `remote_allow_list`, but
+  # additionally, you can specify an `interfaces` map of regular expressions
+  # to match against interface names. The regexp must match the entire name.
+  # All interface rules must be either true or false (and the default will be
+  # the inverse). CIDR rules are matched after interface name rules.
+  # Default is all local IP addresses.
+  #local_allow_list:
+    # Example to block tun0 and all docker interfaces.
+    #interfaces:
+      #tun0: false
+      #'docker.*': false
+    # Example to only advertise this subnet to the lighthouse.
+    #"10.0.0.0/8": true
+
+# Port Nebula will be listening on. The default here is 4242. For a lighthouse node, the port should be defined,
+# however using port 0 will dynamically assign a port and is recommended for roaming nodes.
+listen:
+  # To listen on both any ipv4 and ipv6 use "[::]"
+  host: "[::]"
+  port: 4247
+  # Sets the max number of packets to pull from the kernel for each syscall (under systems that support recvmmsg)
+  # default is 64, does not support reload
+  #batch: 64
+  # Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel
+  # Default is net.core.rmem_default and net.core.wmem_default (/proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_default)
+  # Maximum is limited by memory in the system, SO_RCVBUFFORCE and SO_SNDBUFFORCE is used to avoid having to raise the system wide
+  # max, net.core.rmem_max and net.core.wmem_max
+  #read_buffer: 10485760
+  #write_buffer: 10485760
+
+# EXPERIMENTAL: This option is currently only supported on linux and may
+# change in future minor releases.
+#
+# Routines is the number of thread pairs to run that consume from the tun and UDP queues.
+# Currently, this defaults to 1 which means we have 1 tun queue reader and 1
+# UDP queue reader. Setting this above one will set IFF_MULTI_QUEUE on the tun
+# device and SO_REUSEPORT on the UDP socket to allow multiple queues.
+#routines: 1
+
+punchy:
+  # Continues to punch inbound/outbound at a regular interval to avoid expiration of firewall nat mappings
+  punch: true
+
+  # respond means that a node you are trying to reach will connect back out to you if your hole punching fails
+  # this is extremely useful if one node is behind a difficult nat, such as a symmetric NAT
+  # Default is false
+  #respond: true
+
+  # delays a punch response for misbehaving NATs, default is 1 second, respond must be true to take effect
+  #delay: 1s
+
+# Cipher allows you to choose between the available ciphers for your network. Options are chachapoly or aes
+# IMPORTANT: this value must be identical on ALL NODES/LIGHTHOUSES. We do not/will not support use of different ciphers simultaneously!
+cipher: chachapoly
+
+# Local range is used to define a hint about the local network range, which speeds up discovering the fastest
+# path to a network adjacent nebula node.
+#local_range: "172.16.0.0/24"
+
+# sshd can expose informational and administrative functions via ssh this is a
+#sshd:
+  # Toggles the feature
+  #enabled: true
+  # Host and port to listen on, port 22 is not allowed for your safety
+  #listen: 127.0.0.1:2222
+  # A file containing the ssh host private key to use
+  # A decent way to generate one: ssh-keygen -t ed25519 -f ssh_host_ed25519_key -N "" < /dev/null
+  #host_key: ./ssh_host_ed25519_key
+  # A file containing a list of authorized public keys
+  #authorized_users:
+    #- user: steeeeve
+      # keys can be an array of strings or single string
+      #keys:
+        #- "ssh public key string"
+
+# Configure the private interface. Note: addr is baked into the nebula certificate
+tun:
+  # When tun is disabled, a lighthouse can be started without a local tun interface (and therefore without root)
+  disabled: false
+  # Name of the device
+  dev: nebula1
+  # Toggles forwarding of local broadcast packets, the address of which depends on the ip/mask encoded in pki.cert
+  drop_local_broadcast: false
+  # Toggles forwarding of multicast packets
+  drop_multicast: false
+  # Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 500
+  tx_queue: 500
+  # Default MTU for every packet, safe setting is (and the default) 1300 for internet based traffic
+  mtu: 576
+  # Route based MTU overrides, you have known vpn ip paths that can support larger MTUs you can increase/decrease them here
+  routes:
+    #- mtu: 8800
+    #  route: 10.0.0.0/16
+  # Unsafe routes allows you to route traffic over nebula to non-nebula nodes
+  # Unsafe routes should be avoided unless you have hosts/services that cannot run nebula
+  # NOTE: The nebula certificate of the "via" node *MUST* have the "route" defined as a subnet in its certificate
+  unsafe_routes:
+    #- route: 172.16.1.0/24
+    #  via: 192.168.100.99
+    #  mtu: 1300 #mtu will default to tun mtu if this option is not sepcified
+
+
+# TODO
+# Configure logging level
+logging:
+  # panic, fatal, error, warning, info, or debug. Default is info
+  level: info
+  # json or text formats currently available. Default is text
+  format: text
+  # Disable timestamp logging. useful when output is redirected to logging system that already adds timestamps. Default is false
+  #disable_timestamp: true
+  # timestamp format is specified in Go time format, see:
+  #     https://golang.org/pkg/time/#pkg-constants
+  # default when `format: json`: "2006-01-02T15:04:05Z07:00" (RFC3339)
+  # default when `format: text`:
+  #     when TTY attached: seconds since beginning of execution
+  #     otherwise: "2006-01-02T15:04:05Z07:00" (RFC3339)
+  # As an example, to log as RFC3339 with millisecond precision, set to:
+  #timestamp_format: "2006-01-02T15:04:05.000Z07:00"
+
+#stats:
+  #type: graphite
+  #prefix: nebula
+  #protocol: tcp
+  #host: 127.0.0.1:9999
+  #interval: 10s
+
+  #type: prometheus
+  #listen: 127.0.0.1:8080
+  #path: /metrics
+  #namespace: prometheusns
+  #subsystem: nebula
+  #interval: 10s
+
+  # enables counter metrics for meta packets
+  #   e.g.: `messages.tx.handshake`
+  # NOTE: `message.{tx,rx}.recv_error` is always emitted
+  #message_metrics: false
+
+  # enables detailed counter metrics for lighthouse packets
+  #   e.g.: `lighthouse.rx.HostQuery`
+  #lighthouse_metrics: false
+
+# Handshake Manager Settings
+#handshakes:
+  # Handshakes are sent to all known addresses at each interval with a linear backoff,
+  # Wait try_interval after the 1st attempt, 2 * try_interval after the 2nd, etc, until the handshake is older than timeout
+  # A 100ms interval with the default 10 retries will give a handshake 5.5 seconds to resolve before timing out
+  #try_interval: 100ms
+  #retries: 20
+  # trigger_buffer is the size of the buffer channel for quickly sending handshakes
+  # after receiving the response for lighthouse queries
+  #trigger_buffer: 64
+
+
+# Nebula security group configuration
+firewall:
+  conntrack:
+    tcp_timeout: 12m
+    udp_timeout: 3m
+    default_timeout: 10m
+    max_connections: 100000
+
+  # The firewall is default deny. There is no way to write a deny rule.
+  # Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
+  # Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr)
+  # - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
+  #   code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any`
+  #   proto: `any`, `tcp`, `udp`, or `icmp`
+  #   host: `any` or a literal hostname, ie `test-host`
+  #   group: `any` or a literal group name, ie `default-group`
+  #   groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass
+  #   cidr: a CIDR, `0.0.0.0/0` is any.
+  #   ca_name: An issuing CA name
+  #   ca_sha: An issuing CA shasum
+
+  outbound:
+    # Allow all outbound traffic from this node
+    - port: any
+      proto: any
+      host: any
+
+  inbound:
+    - port: any
+      proto: any
+      host: any
diff --git a/core/auth/ui/main.go b/core/auth/ui/main.go
index 0546802..92ca885 100644
--- a/core/auth/ui/main.go
+++ b/core/auth/ui/main.go
@@ -2,6 +2,7 @@
 
 import (
 	"bytes"
+	"crypto/tls"
 	"embed"
 	"encoding/json"
 	"errors"
@@ -14,6 +15,7 @@
 	"net/http"
 	"net/http/cookiejar"
 	"net/url"
+	"strings"
 
 	"github.com/gorilla/mux"
 	"github.com/itaysk/regogo"
@@ -172,6 +174,15 @@
 	}
 	flow, ok := r.Form["flow"]
 	if !ok {
+		challenge, ok := r.Form["login_challenge"]
+		if ok {
+			// TODO(giolekva): encrypt
+			http.SetCookie(w, &http.Cookie{
+				Name:     "login_challenge",
+				Value:    challenge[0],
+				HttpOnly: true,
+			})
+		}
 		http.Redirect(w, r, s.kratos+"/self-service/login/browser", http.StatusSeeOther)
 		return
 	}
@@ -303,7 +314,44 @@
 		for _, c := range resp.Cookies() {
 			http.SetCookie(w, c)
 		}
-		http.Redirect(w, r, "/", http.StatusSeeOther)
+		if challenge, _ := r.Cookie("login_challenge"); challenge != nil {
+			username, err := getWhoAmIFromKratos(resp.Cookies())
+			if err != nil {
+				http.Error(w, err.Error(), http.StatusInternalServerError)
+				return
+			}
+			req := &http.Request{
+				Method: http.MethodPut,
+				URL: &url.URL{
+					Scheme:   "https",
+					Host:     "hydra.pcloud",
+					Path:     "/oauth2/auth/requests/login/accept",
+					RawQuery: fmt.Sprintf("login_challenge=%s", challenge.Value),
+				},
+				Header: map[string][]string{
+					"Content-Type": []string{"text/html"},
+				},
+				// TODO(giolekva): user stable userid instead
+				Body: io.NopCloser(strings.NewReader(fmt.Sprintf(`
+{
+    "subject": "%s",
+    "remember": true,
+    "remember_for": 3600
+}`, username))),
+			}
+			client := &http.Client{
+				Transport: &http.Transport{
+					TLSClientConfig: &tls.Config{InsecureSkipVerify: true},
+				},
+			}
+			resp, err := client.Do(req)
+			if err != nil {
+				http.Error(w, err.Error(), http.StatusInternalServerError)
+			} else {
+				io.Copy(w, resp.Body)
+			}
+		}
+		// http.Redirect(w, r, "/", http.StatusSeeOther)
 	}
 }
 
diff --git a/core/auth/ui/server b/core/auth/ui/server
deleted file mode 100755
index 042afdd..0000000
--- a/core/auth/ui/server
+++ /dev/null
Binary files differ
diff --git a/core/nebula/controller/Makefile b/core/nebula/controller/Makefile
index 3f7a57e..7fa4716 100644
--- a/core/nebula/controller/Makefile
+++ b/core/nebula/controller/Makefile
@@ -6,12 +6,12 @@
 	./hack/generate.sh
 
 controller: clean
-	go1.16 mod tidy
-	go1.16 mod vendor
-	go1.16 build -o controller main.go
+	go mod tidy
+	go mod vendor
+	go build -o controller main.go
 
 web: clean
-	go1.16 build -o web web.go
+	go build -o web web.go
 
 
 # image: clean build
diff --git a/scripts/homelab/installer/auth.sh b/scripts/homelab/installer/auth.sh
index 59938ad..6f1f928 100644
--- a/scripts/homelab/installer/auth.sh
+++ b/scripts/homelab/installer/auth.sh
@@ -20,7 +20,13 @@
 # kubectl create configmap kratos -n core-auth --from-file=../../core/auth/kratos.yaml
 # kubectl create configmap identity -n core-auth --from-file=../../core/auth/identity.schema.json
 # kubectl apply -f ../../core/auth/kratos/install.yaml
-# kubectl apply -f ../../core/auth/ui/install.yaml
+
+kubectl create configmap \
+	-n core-auth \
+	auth-ui-lighthouse-config \
+	--from-file ../../core/auth/ui/lighthouse.yaml
+
+kubectl apply -f ../../core/auth/ui/install.yaml
 
 kubectl create configmap hydra -n core-auth --from-file=../../core/auth/hydra/hydra.yaml
 kubectl apply -f ../../core/auth/hydra/install.yaml